Rev: 006 Product Family Data Sheet LM561B - 5630 Middle Power LED Introduction Features Beam Angle: 120˚ Precondition : JEDEC Level 2a Dimension : 5.6 x 3.0 x 0.8 mm ESD withstand Voltage : up to ± 5KV [HBM] Applications INDOOR LIGHTING : Ambient Light, LED tube, Down light, LED bulb and Ceiling Light SAMSUNG ELECTRONICS 95, Samsung2-Ro, Giheung-Gu, Yongin-City, Gyeonggi-Do 446-711, KOREA http://www.samsungled.
Contents 1. Product Code Information ----------------------- 2. Characteristics ----------------------- 10 3. Typical Characteristics Graph ----------------------- 11 4. Outline Drawing & Dimension ----------------------- 17 5. Reliability Test Items & Conditions ----------------------- 18 6. Solder Conditions ----------------------- 19 7. Tape & Reel ----------------------- 20 8. Label Structure ----------------------- 22 9. Packing Structure ----------------------- 23 10.
1. Product Code Information 1) Luminous Flux Bins (Ts = 25℃) Nominal CCT 2700K 3000K 3500K 4000K 5000K 5700K 6500K Sorting Condition lm @65mA Product Code Flux Rank Flux Range (Φv, lm) SPMWH◆541MD5WAW☆S1 S1 24.0 ~ 26.0 SPMWH◆541MD5WAW☆S2 S2 26.0 ~ 28.0 SPMWH◆541MD5WAW☆S3 S3 28.0 ~ 30.0 SPMWH◆541MD5WAV☆S1 S1 24.5 ~ 26.5 SPMWH◆541MD5WAV☆S2 S2 26.5 ~ 28.5 SPMWH◆541MD5WAV☆S3 S3 28.5 ~ 30.5 SPMWH◆541MD5WAU☆S1 S1 25.0 ~ 27.0 SPMWH◆541MD5WAU☆S2 S2 27.0 ~ 29.
2) Color Bins (Ts = 25℃) 1) Color Binning Nominal CCT Product Code Color Rank SPMWH◆541MD5WAW0S1 SPMWH◆541MD5WAW0S2 W0(Whole bin) SPMWH◆541MD5WAW0S3 Chromaticity Bins W1, W2, W3, W4, W5, W6, W7, W8, W9, WA, WB, WC, WD, WE, WF, WG SPMWH◆541MD5WAWHS1 2700K SPMWH◆541MD5WAWHS2 WH(Half bin) W5, W6, W7, W8, W9, WA, WB, WC SPMWH◆541MD5WAWHS3 SPMWH◆541MD5WAWMS1 SPMWH◆541MD5WAWMS2 WM(Quarter bin) W6, W7, WA, WB SPMWH◆541MD5WAWMS3 SPMWH◆541MD5WAV0S1 SPMWH◆541MD5WAV0S2 V0(Whole bin) SPMWH◆541MD5WAV0S3
1) Color Binning (Continued) Nominal CCT Product Code Color Rank SPMWH◆541MD5WAT0S1 SPMWH◆541MD5WAT0S2 T0(Whole bin) SPMWH◆541MD5WAT0S3 Chromaticity Bins T1, T2, T3, T4, T5, T6, T7, T8, T9, TA, TB, TC, TD, TE, TF, TG SPMWH◆541MD5WATHS1 4000K SPMWH◆541MD5WATHS2 TH(Half bin) T5, T6, T7, T8, T9, TA, TB, TC TM(Quarter bin) T6, T7, TA, TB SPMWH◆541MD5WATHS3 SPMWH◆541MD5WATMS1 SPMWH◆541MD5WATMS2 SPMWH◆541MD5WATMS3 SPMWH◆541MD5WAR0S1 SPMWH◆541MD5WAR0S2 R0(Whole bin) SPMWH◆541MD5WAR0S3 R1, R2, R3,
2) Chromaticity Region & Coordinates http://www.samsungled.
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X W rank (2700K) W1 W2 W3 W4 W5 W6 W7 W8 0.4373 0.3893 0.4418 0.3981 0.4475 CIE Y Region CIE X CIE Y V rank (3000K) 0.4465 0.4071 0.4513 0.4164 0.3994 0.4573 0.4178 0.4242 0.3919 0.4322 0.4096 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4428 0.3906 0.4523 0.4085 0.4203 0.3833 0.4281 0.4006 0.4475 0.3994 0.4573 0.4178 0.4532 0.4008 0.4634 0.
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region CIE X U rank (3500K) U1 U2 U3 U4 U5 U6 U7 U8 0.3889 0.3690 0.3915 0.3768 0.3981 CIE Y Region CIE X CIE Y T rank (4000K) 0.3941 0.3848 0.3968 0.3930 0.3800 0.4040 0.3966 0.3744 0.3685 0.3782 0.3837 0.3953 0.3720 0.4010 0.3882 0.3686 0.3649 0.3719 0.3797 0.3953 0.3720 0.4010 0.3882 0.3726 0.3612 0.3763 0.3760 0.3981 0.3800 0.4040 0.3966 0.4048 0.3832 0.4113 0.
2) Chromaticity Region & Coordinates (Continued) Region CIE X CIE Y Region CIE X CIE Y Region R rank (5000K) R1 R2 R3 R4 R5 0.3366 0.3369 0.3441 0.3428 0.3449 0.3515 0.3369 0.3451 0.3441 0.3428 0.3515 0.3487 0.3527 0.3578 0.3449 CIE X CIE Y Region CIE X CIE Y P rank (6500K) 0.3456 0.3601 0.3539 0.3669 0.3551 0.3760 0.3464 0.3688 0.3055 0.3177 0.3117 0.3393 0.3363 0.3287 0.3145 0.3187 0.3081 0.3049 0.3433 0.3341 0.3441 0.3428 0.3515 0.3366 0.3369 0.3135 0.
2.
3. Typical Characteristics Graph (Ts = 25℃) 1) Spectrum Distribution [CCT : 2700K & 3000K] [CCT : 3500K & 4000K] http://www.samsungled.
[CCT : 5000K & 5700K] [CCT : 6500K] http://www.samsungled.
2) Forward Current Characteristics [Relative Luminous Flux vs. Forward Current] (Ts = 25℃) [Forward Current vs. Forward Voltage] (Ts = 25℃) http://www.samsungled.
3) Temperature Characteristics [Relative Luminous Flux vs. Ts] (IF = 65mA) [Forward Voltage vs. Ts] (IF = 65mA) http://www.samsungled.
4) Color shift Characteristics [Color Δx, Δy vs. Forward Current] [Color Δx, Δy vs. Ts] http://www.samsungled.
5) Derating Curve 6) Beam Angle Characteristics http://www.samsungled.
4. Outline Drawing & Dimension 1. Tolerance is ±0.10 mm 2. The maximum compressing force is 15N on the body ⓐ 3. Do not place pressure on the encapsulation resin ⓑ Top View Left Side View Anode Mark ⓐ Bottom View ⓑ Cathode Anode Front View Recommended Land Pattern Notes: 1) This LED has built-in ESD protection device(s) connected in parallel to LED Chip(s). 2) Ts point & measurement method ① Measure the nearest point to the thermal pad. If necessary, remove PSR of PCB to reach Ts point.
5.
6. Solder Conditions 1) Reflow Conditions ( Pb Free ) Reflow Frequency : 2 times max. 2) For Manual Soldering Not more than 5 seconds @Max. 300℃, under soldering iron. http://www.samsungled.
7. Tape & Reel 1) Taping Dimension (unit : mm) Anode Mark (Cutting side) Tapping Diretion Start End More than 500㎜ Mounted with More than 100~200㎜ Leading part more than Unloaded tape LED package Unloaded tape 500㎜ http://www.samsungled.
2-1) Reel Dimension (max 2,500 pcs) 2-2) Reel Dimension (max 10,000 pcs) Symbol A B C W1 W2 Spec(mm) Ø330±1 80±1 13±0.5 13±0.3 17.5±1 (1) Quantity : The quantity/Reel to be 2,500 pcs or 10,000 pcs, . (2) Cumulative Tolerance : Cumulative tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10℃ angle to be the carrier tape. (4) Packaging : P/N, Manufacturing data code no.
8. Label Structure 1) Label Structure ⓐⓑⓒⓓⓔⓕ A1★1S1 SPMWHT541MD5WA★0S1 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Rank Code N.B) Denoted rank is the only example. '★' means All kind of Chromaticity Coordinate Rank. Rank Code ⓐⓑ : Forward Voltage(VF) Rank (refer to page. 11) ⓒⓓ : Chromaticity Coordinate Rank (refer to page. 4~10) : Luminous Flux(Φv, lm) Rank (refer to page.
9.
1-2) Packing Process (The quantity of PKG on the Reel to be Max 10,000 pcs) Reel A1★1S1 SPMWH1541MD5WA★0S1 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 10,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII LEVEL 2a Aluminum Vinyl Bag A1★1S1 SPMWH1541MD5WA★0S1 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAV94001 / 1001 / 10,000 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII A1★1S1 SPMWH1541MD5WA★0S1 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
2) Aluminum Packing Bag A1★1S1 SPMWHT541MD5WA★0S1 A1★1S1 01 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII GLAW94001 / 1001 / 2,500 pcs IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII Silica gel & Humidity Indicator Card in Aluminum Vinyl Bag http://www.samsungled.
10. Precaution for use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 과전류 방지를 위해 전압의 미세한 이동에 의해 야기되는 전류의 순간 변화를 방지하기 위해 저항 등의 설치를 권장함. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 제품은 물, 오일, 유기물과 같은 액체 타입에서의 사용은 제한되며, 세정이 필요할 시에는 IPA 사용을 권장함.
7) Devices require baking before mounting, if humidity card reading is >60% at 23±5℃. 만약 습도표시카드의 수치가 23±5℃에서 60% 이상이라면, 제품 실장 전 baking해야 함. 8) Devices must be baked for 1 hour at 60±5℃, if baking is required. 만약 baking이 필요하다면, 제품은 60±5℃에서 1시간 정도 baking 되어야 함. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. LED는 정전기 및 서지에 민감한 제품이므로, LED 제품을 다룰 시에는 정전기 방지장갑이나 손목밴드를 사용하기를 권장함.
11) Risk of Sulfurization (or Tarnishing) The LED from Samsung Electronics uses a silver-plated lead frame and its surface color may change to black(or dark colored) when it is exposed to sulfur(S), chlorine (Cl) or other halogen compound. 삼성전자의 LED는 Ag(은)을 도금한 리드프레임을 사용함. 이 리드프레임의 표면이 황(S), 염소(Cl), 또는 다른 할로겐 화합물들에 노출시 Ag(은)은 검정(또는 어두운색)으로 바뀔 수 있음. Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution.
11. Hazard Substance Analysis - SGS http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
11. Hazard Substance Analysis - SVHC(REACH) http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
http://www.samsungled.
Revision History Date No. Revision History 2013.02.08 001 2013.03.06 002 2013.03.25 003 Writer Drawn Approved New version. W.H Jung Y.T KIM Add up Quarter and half of color binning. W.H Jung Y.T KIM C.H. KWON Y.T KIM W.H Jung Y.T KIM W.H Jung Y.T KIM W.H Jung Y.B Yun 1) Change of tapping Q'ty from 2,000 pcs to 2,500 pcs. 2) Change of CIE tolerance x,y:±0.005 2013.05.14 004 Add up a mark of UL certification. 1) Add up ErP(Energy-related Products) of the Energy regulation. 2013.
