User's Manual

Smart

Door Lock

SHN-WDS700

1)Drilla2-1/8˝(54mm)diameterholethroughthedoor,asindicatedon

the template, using a hole saw.

2)Drilla1˝(25mm)mortiseholeusingaholesaw.

3) Drill strike plate holes using a drill bit (1/8˝,2.5mm).

1) Using the template, locate the center horizontal

line for the deadbolt hole, which lines up with the

centerofthe2-1/8˝hole,anddrawahorizontalline

on the door frame to mark where you will make the

deadbolt mortise hole.

2) Measure half the thickness of the door. Now,

measure that distance from where the door stops

at the frame when the door is closed toward the

door jamb and mark a straight, vertical line the

length of the door strike plate. Draw a horizontal

line from the mark you made in Step 1 toward the

verticalline.Wherebothlinescross,makea1˝(25

mm)diameterhole,1/2˝(13mm)indepth.

3) Align the holes of the strike plate with the vertical

line. Trace the outline of the strike plate and

mortisewitha1/16˝(1.6mm)indentation.Attach

the strike plate with the 2 screws provided.

Step 3. Drilling

Step 4. Strike Plate Installation

FH+ T4 x 19

① 54mm

② 25mm

③

2.5mm