User's Manual
6
7
Smart
Door Lock
SHN-WDS700
|
Installing lock
Outside
Inside
1. Installing the Dead Bolt(E)
1. Before installation
1) Check the faceplate type of your door.
2) Make sure the deabolt directon as shown before
inserting it into a door side.
2. Insert the deadbolt from the side of the door.
3.FixthedeadboltusingtwoFH+T4X19screws.
* If there is round strike hole, change the faceplate, and
insert the deadbolt following right side drawing.
2. Installing the Exterior Unit
1. Ensure the Exterior Unit is aligned with the center hole of
the deadbolt and the tailpiece is already cut.
2. Attach the exterior unit.
3. Insert the tailpiece to the exterior unit through the dead
bolt.
The dead bolt must be in a retracted position.
CAUTION:In case of right-handed door, insert the tailpiece
horizontally.
In case of left-handed door, insert the tailpiece vertically.
E
H1
E
E
I
Left-handed Right-handed
A
I
E
A
C
G
B
L
D
H2
H3
I
E