User's Manual

14
Basic Functions
This section describes the ways to initialize the information registered in the doorlock, to
register the password and card data, and to open or close the door.
Opening the Door from Outside with a
Password or a Card
1. Pressing the [Wake Up] Button
The keypad is lighted
when the [Wake Up] button
is pressed.
2. Entering the Password or Contacting the Card
Press the [¿] button after
entering the password or
place the card.
or
Successful: "Too~~t”
Failed: "Toot~"
- Password entry or card contact is validated only when the keypad is lighted. If it is lighted
off, press the [Wake Up] button first.
- To cancel the password entry, press the [#] button and start again.
- When an invalid password entry or unregistered card contact is attempted for 5 times in a
row, the beep warning is sounded 20 times and the doorlock becomes inactive for 3
minutes. The “toot” sound is activated every 10 seconds while the unit is inactive, and
then the “toot~ toot~ toot~ toot~ toot~” sound is activated before the unit becomes
operational again.