User's Manual

17
Functional Setup or Release Summary
Code Function
Setup or Release
(Follow the steps in the exact sequence.)
Ref.
Page
-
Initialization
(Complete removal
of all passwords
and card data)
Press the [Initialization] button on the indoor unit.
Input the current master password or '1470852369'.
Press the [¿] button.
※ The password is reset to ‘1234’ after initialization.
32
-
Program Mode
Execution
Press the [Register] button on the indoor unit.
Current master password, administrator password, or card
authentication
Press the [¿] button.
18
10
Master Password
Change
Program mode run. Press 10. Press the [¿] button.
Enter the current master password. Press the [¿] button.
Enter the new master password. Press the [¿] button.
19
20/40
User Password/
Card Registration
Program Mode Run Press 20/40. Press the [¿] button.
Enter the user code. Press the [¿] button.
Enter the password/card data. Press the [¿] button
(when entering the password).
20/23
30
Temporary
(Single Use only)
Password
Registration
Program Mode Run Press 30. Press the [¿] button.
Enter the user code (except the administrator group).
Press the [¿]
button.
Enter the password. Press the [¿] button.
22
50~55
User or Group
Removal, Activation
or Deactivation
Program Mode Run Pres 50~55. Press the [¿] button.
Enter the user code / group code. Press the [¿] button.
25
60/62
User Entry Control
Release
(by User/Group)
Program Mode Run Press 61/63. Press the [¿] button.
Enter the user code / group code. Press the [¿] button.
26
61/63
User Entry Control
Setup
(by User/Group)
Program Mode Run Press 61/63 Press the [¿] button.
Enter the user code / group code. Press the [¿] button.
Enter [Start Time][End Time]. Press the [¿] button
26
70/71
Passage Mode
Setup/Release
Program Mode Run Press 70/71. Press the [¿] button.
27
80
Current Time Setup
Program Mode Run Press 80. Press the [¿] button.
Enter [YYMMDDHHMM]. Press the [¿] button.
27
90~95
Random Security
Function Setup and
Release
Release: Program Mode Run Press 90. Press the [¿] button.
Setup: Program Mode Run
Press 91~95. Press the [¿]
button.
28
00~03
Sound Setup and
Release
Release: Program Mode Run Press 00. Press the [¿] button.
Setup: Program Mode Run
Press 01~03. Press the [¿]
button.
29