User's Manual

4. Entering an Additional Temporary Password (optional)

When the LED numbers 4, 5 and 6 flash after the

password is saved, repeat the steps 2 and 3 within 10

seconds to register the additional passwords.

(The program mode is automatically terminated when

there is no key entry within 10 seconds.)

Registering the User Card (Code 40)

Either the card enclosed in the product package or ISO 14443 A Type can be registered.

User care up to 250, including the passwords, can be registered.

1. Entering the Code in the Program Mode

When the LED numbers 1, 2 and 3 flash after the

program mode is operated, press the code 40 and

then the [¿] button.

2. Entering the User Code

When the LED numbers 4, 5 and 6 flash, press the

user code (1~250) and then the [¿] button.

- Valid Entry: The ‘toot, toot’ sound is activated, and the mode

is turned into card entry standby mode.

- Invalid Entry: The ‘toot~~ toot, toot’ sound is activated, and

the mode is turned into the program code entry standby

mode.

Toot, toot