User's Manual

3. Placing the Card

When the LED numbers 7, 8 and 9 flash, place the card

to the card reader on the outdoor unit. The card is

registered after the sound of ‘Too~~t, toot, toot’.

- The unit turns into the user code entry standby mode.

4. Registering an Additional Card (optional)

When the LED numbers 4, 5 and 6 flash, repeat the

steps 2 and 3 within 10 seconds to register the

additional cards.

(The program mode is automatically terminated when

there is no key entry within 10 seconds.)

- To terminate the program mode without registering an

additional card, press the [Register] button on the indoor unit

or the [Wake Up] button on the outdoor unit.

5. Checking Card Registration (from outside)

Press the [Wake Up] button on the outdoor unit and place the registered card on the card

reader.

- Please refer to ‘Opening the Door from Outside with a Password or a Card’ (page 14).

Too~~t, toot, toot

Toot, toot