User's Manual

29
Setting up and Releasing the Sound
(Code 00~03)
This function allows setting up the sound activated when the keypad is pressed or the
door is locked or unlocked.
Setting up the sound function
Default setting is to activate all sound levels (3 sound level setting).
When the LED numbers 1, 2 and 3 flash after
the program mode is operated, enter the code
00~03 and then press the [¿] button.
- 00: No sound
- 01: Level 1
- 02: Level 2
- 03: Level 3
- [00] Button: No sound is activated (except the warning sound).
- [01]~[03] Button: All sounds are activated. The sound volume gets higher as the level
increases.
- The level is set at level 3 after initialization.
- In program mode, the level 3 sound is activated regardless of the sound setting.
- Sound setting and release are enabled only when the door is opened.
- The sound of the outdoor unit is set at the optimum level.
Sound Function Operation