User Guide

Setup your ADT Door and Window Detectors
Use the ADT Door and Window Detectors to protect doors
and windows where an intruder might be able to enter your
home.
Take the rst ADT Door and Window Detector to the door or
window where you intend to mount it. Make sure you are
within 350 feet of the ADT Security Hub.
Launch the SmartThings mobile app and add a new device.
• There are two ADT Door and Window Detectors in the
ADT Home Security Starter Kit and each one consists of
two parts. Setup the detectors one at a time and do not
remove the tabs marked “Pull This Tab” until instructed
below.
• Exact range depends on your home’s construction, the
environment, the position of the ADT Security Hub, and
the position and number of other connected devices.
4. Use the SmartThings app to scan the QR code on the back
of the detector and then follow the on-screen instructions
to complete setup.
QR Code
Detector (Back)
• Remove the QR code from the back of the detector
and attach it inside the ADT Security Hub User Guide
for future reference.
ADT Door and Window Detectors