User Manual

Samsung CDMA BSS: Indoor BTS Installation Manual
9
BSS Version 4, Document V4D0001 release 0.5, Indoor BTS Installation Manual, release 2.0
Complete the following steps to ensure an assembly containing
electrostatic sensitive devices can be safely removed without
damage:
M Before handling electrostatic sensitive devices, touch a grounded
point with your bare hand to dissipate any static charge that may
have developed in your body. A ground point can be any bare
metal surface, such as the unpainted surface of a rack, that has
been grounded. Ground points are provided on all racks
Note: Do not handle any exposed connector contacts.
M Use a grounding wrist strap to remain discharged. The grounding
wrist strap should be worn around your bare wrist and attached
to the ground point until you place the removed assembly in a
suitable container.
M Suitable ESD containers are:
— Rigid metal containers.
— Conductive foam-lined containers.
— Approved anti-static plastic bags.
M Containers containing electrostatic sensitive devices must be
labeled appropriately.