User Manual

Samsung CDMA BSS: Site Planning
34
BSS Version 4, Document V4D0001 release 0.5, Site Planning, release 2.0
Connecting the T1 cable
Use the following procedures to connect a T1 cable to the BTS:
1 Run the T1 cable from the customer demarcation to SBR1, securing
the cable with tie wraps.
2 Attach the 50-pin male connector to the T1 cable.
3 The cable and connector are described below:
The pinouts on the Samsung standard T1 connector are listed in the
following table:
Cable description Cable connector BTS connector
25 pair/24 AWG
P/N: N-002524WFZ
50-pin, male
P/N: DDK/5730500
50-pin, female
Pair
#
Pin
#
Base
color
Pair
Color
Signal Label
Pin
#
Base
Color
Pair
Color
Signal Label
1 1 White blue PCMIN_1(-) 26 White blue PCMIN_1(+)
2 2 orange PCMIN_2(-) 27 orange PCMIN_2(+)
3 3 green PCMIN_3(-) 28 green PCMIN_3(+)
4 4 brown PCMIN_4(-) 29 brown PCMIN_4(+)
5 5 grey PCMIN_5(-) 30 grey PCMIN_5(+)
6 6 Red blue PCMIN_6(-) 31 Red blue PCMIN_6(+)
7 7 orange PCMIN_7(-) 32 orange PCMIN_7(+)
8 8 green PCMIN_8(-) 33 green PCMIN_8(+)
9 9 brown PCMIN_9(-) 34 brown PCMIN_9(+)
10 10 grey PCMIN_10(-) 35 grey PCMIN_10(+)
11 11 n/c 36 n/c
12 12 n/c 37 n/c
13 13 n/c 38 n/c
14 14 Yellow blue PCMOUT_1(-) 39 Yellow blue PCMOUT_1(+)
15 15 orange PCMOUT_2(-) 40 orange PCMOUT_2(+)
16 16 green PCMOUT_3(-) 41 green PCMOUT_3(+)
17 17 brown PCMOUT_4(-) 42 brown PCMOUT_4(+)
18 18 grey PCMOUT_5(-) 43 grey PCMOUT_5(+)
19 19 Black blue PCMOUT_6(-) 44 Black blue PCMOUT_6(+)
20 20 orange PCMOUT_7(-) 45 orange PCMOUT_7(+)
21 21 green PCMOUT_8(-) 46 green PCMOUT_8(+)
22 22 brown PCMOUT_9(-) 47 brown PCMOUT_9(+)
23 23 grey PCMOUT_10(-) 48 grey PCMOUT_10(+)
24 24 n/c 49 n/c
25 25 n/c 50 n/c