User Manual
Table Of Contents
- Introduction
- Physical Installation
- Cabling
- Initial Testing
- Completion
- Appendix A: Indoor BTS installation required tools
- Appendix B: Indoor BTS installation materials
- Appendix C: Indoor BTS Installation Record
- About this Document
Samsung CDMA BSS: Site Planning
36
BSS Version 4, Document V4D0001 release 0.5, Site Planning, release 2.0
4 Connect the T1 cable to the 50-pin female connector shown in the
following illustration.
Be sure to secure the male connector with the two spring clips
attached to the female connector.
5 Label both ends of the T1 cable.
6 Complete the appropriate boxes in the Indoor BTS Installation
Record.