User Manual

Samsung CDMA BSS: Indoor BTS Installation Manual
2
CDMA BSS Version 4, Indoor BTS Installation Manual, release 2.0
Scope
This document covers the installation procedures for a single rack
Indoor Base Transceiver Station (Indoor BTS).
Note: This installation must be performed by Samsung qualified
service personnel only, using only the tools, supplies, and materials
listed in this manual. Any deviation will negate the responsibility of
Samsung for operation or condition of this equipment.
Note: Access to the Indoor BTS is restricted to Samsung qualified
service personnel or other qualified maintenance personnel for
internal subassembly or component replacement or any internal
adjustment.
Warning: The rear or side panels of any Samsung equipment may
be opened only by Samsung qualified service personnel. Samsung
is not responsible for injury or harm to persons violating this policy.
This equipment complies with Part 24 of the FCC rules. Any changes
or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
Warning: This product is designed for use with antennas mounted
on permanent outdoor structures. Upon installation the potential for
RF exposure to persons should be evaluated.
Following completion of the civil construction, the following
procedures will be performed:
M Site preparation and layout
M BBU installation
M GPS installation
M Physical installation of the BTS
M Cabling the equipment
M Initial testing of the BTS
M Completing the installation
A checklist for these procedures is given in Appendix B.