User Manual
Table Of Contents
- Introduction
- Physical Installation
- Cabling
- Initial Testing
- Completion
- Appendix A: Indoor BTS installation required tools
- Appendix B: Indoor BTS installation materials
- Appendix C: Indoor BTS Installation Record
- About this Document
Samsung CDMA BSS: Indoor BTS Installation Manual
38
BSS Version 4, Document V4D0001 release 0.5, Indoor BTS Installation
Manual, release 2.0
4 The GPS cable connects to the top of the SBR. Connect the GPS
jumper cable to the GPS-A N-type female connector shown in the
following figure:
5 Label both ends of the GPS jumper cable.
6 Complete the appropriate boxes in the Indoor BTS Installation
Record.
7 If a second (backup) GPS antenna is installed, route and connect a
second GPS cable. Follow steps 2 through 6 above, but connect the
second GPS jumper cable to the GPS-B connector on the SBR.