User Manual

Samsung CDMA BSS: Indoor BTS Installation Manual
41
BSS Version 4, Document V4D0001 release 0.5, Indoor BTS Installation Manual, release 2.0
Connecting the RF cables
RF cables are routed using a combination of cable ladders, cable
pass-throughs, and cable trays. Cable ties are applied wherever
appropriate.
The routing of one of the overhead cables is illustrated in the
following figure:
Make sure the RF cables are grounded outside the building, and that
they enter the building through arrestors:
1 When building an RF cable, identify the FA and the sector using
colored tape at both ends of the cable.
2 Connect RF cables to the appropriate
abg-A and abg-B connectors.
3 Attach the ½” jumper cables to the bulkhead.
4 Route the ½” jumper cables to SBR1 securing the cables to the
cable-tray.