User Manual

CDMA2000 BTS SCBS-519L10 Installation Manual/Ed.01

y Clean the area where an antenna is installed.

y Check the Voltage Standing Wave Ratio(VSWR) of an antenna. The value should be

within the corresponding standard.

The method of installing a sector antenna is described as follows:

1) Fix mast pipe on the platform or iron-frame of an iron tower.

2) Fix a sector antenna by using clamp on the mast pipe.

3) Adjust the antenna with maximum 20° vertically, considering electric wave strength.

Figure 2.53 Sector Antenna

7/16”Din Type

(Female)

Mast Pipe

0~20°

Antenna Rear Side

Radome

Mast Pipe

Main Radiation

Direction

Antenna Fixing

Bracket(Clamp)