User Manual

CHAPTER 1. Before Installation
1-10 © SAMSUNG Electronics Co., Ltd.
1.4 Safety Measures
Observing Safety Regulations
Abide by safety rules to avoid safety hazards during installation.
Sanitation
The working area should be kept clean to maintain the sophisticated work environment.
First Aid
If an injury occurs due to an accident during installation, take emergency measures using
first aid medicines at the site, and if necessary, transport the injured to a hospital for
treatment.
Safety Accident Prevention
y Open areas such as connecting parts, roof, and scaffold should be blocked using
guardrails or fences.
y Warning signs should be attached to guardrails, steps, and doors.
y Facilities where safety accidents are expected should be set as restricted areas.
y Cable holes on the floor should be covered with hard covers.
y Wear protective gloves and glasses when making holes on walls or ceiling.
y An extra person should assist the operation of a crane.
y The crane should not be overloaded.
y Install lighting to optimize the working environment.
y Do not step on or apply excessive force on cables.
y Know the locations and usage of fire alarms and fire extinguishers.
y Check the location of the emergency exit.
y Make sure short circuits do not occur due to metals such as watches and rings.
y Major processes should not be performed single-handedly.
y Adjust the height of ladders to prevent falls.
y Wear earplugs in noisy areas where cutting machines, drills, or grinders are used.