User Manual

CDMA2000 BTS SCBS-519L10 Installation Manual/Ed.01
© SAMSUNG Electronics Co., Ltd. 2-7
2.3.1.3 Rack Marking
1) Check the direction of the equipment and mark a reference point on the right side of
the front panel.
2) Mark the front reference line by drawing a horizontal line starting from the reference
point.
3) For a 700x600 equipment, draw as many adjoint lines as the number(‘n)of racks to be
placed in a single row at every 710mm distance, including the 10mm distance between
racks. The last adjoint line should match the end line of the row.
4) Mark the four points of the 710x600 rectangle.
There should be enough space in front of the equipment to let the door open.
Figure 2.3 Drawing Extension Lines According to Rack Layout
700
700
10
600
1411
Wall
Door
1281
Front Reference
Line
10 mm Distance(110° Angle)
Front Reference
Point