User Manual

CHAPTER 2. Installation
2-10 © SAMSUNG Electronics Co., Ltd.
2.3.3 Installing Cable Holes
Drill a hole on the concrete and install a cable hole angle set to wire cables through the
floor or ceiling. Cable holes should be installed on the floor or on the surface of a wall.
1) For floor installation, drill a hole according to specifications in the drawing and install
a seating on the bottom surface of the floor.
2) For wall installation, drill a hole according to specifications in the drawing and install
the cable rack.
3) The floor or wall surface where cables holes are installed should be well plastered and
painted.
4) Finish the installation by covering the top of the seating and holes on the wall with
silicon.
Figure 2.6 Cable Hole Structure
Bolt(M12)
Spring Washer
Cable Rack
Nut(M12)
Spring Washer
Plane Washer
Insulation Bushing
Plane Washer
Plane Washer
Spring Washer
Bolt(M12)
Insulation Bushing
Seating
삭제됨: 1