User Manual

CDMA2000 BTS SCBS-519L10 Installation Manual/Ed.01

Do Not Leak Water

If the water is leaking to a ground, insulation will fail in the place. Thus, do not

leak water when performing leveling by a vinyl hose. Additionally, the vinyl hose

should not be broken off or stepped on.

Rack Leveling by a Plumb

1) Install the two poles on the front and those on the side to install plums.

2) Connect a plumb with a pole by using thread and drop the plumb to the near bottom.

The plumbs and the ground surface should not be attached.

3) Measure the length between the thread and the upper part of the rack(a) and between

the thread and the lower part of the rack(a’).

4) Check if the lengths of the upper part(a) and the lower part(a’) are identical.

5) If a and a’ are identical, this leveling is completed.

Figure 2.31 Leveling by a Plumb

Plumb