User Manual

CDMA2000 BTS SCBS-519L10 Installation Manual/Ed.01

Tower Grounding

1) Install Tower Ground Bar(TGB) at the end of the cable rack at the bottom of the tower.

2) Install TGB in a multipoint method starting from the lightning rod ground wire of GV

x1C.

3) Fix the ground kit, which is the feeder line ground assembly, on the TGB grounding

terminal and tower hole using the pressure terminal attached to the end of the ground

wire for the ground kit.

Figure 2.52 Connecting Ground Wire on Tower

Lightning Rod

7/8” Feeder Line

Ground Kit

TGB

GV 38mm

x 1C

GV 100 mm

x 1C