BD-C5900 Blu-ray Disc Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register 01963B-BD-C5900-XAC-ENG.
Key features Blu-ray Disc Features Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD. The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below.
Safety Information 02 Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF ELECTRIC The explanation point within the triangle triangle is a warning sign alerting you of SHOCK, DO NOT REMOVE COVER (OR BACK) is a warning sign alerting you of important dangerous voltage inside the product. NO USER SERVICEABLE PARTS INSIDE. REFER instructions accompanying the product. SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Information Precautions Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
Handling Cautions • Do not write on the printed side with a ball-point pen or pencil. • Do not use record cleaning sprays or antistatic. Also, do not use volatile chemicals, such as benzene or thinner. • Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.) • Do not use scratch-proof protectors or covers. • Do not use discs printed with label printers available on the market. • Do not load warped or cracked discs.
Contents Key features 2 2 Blu-ray Disc Features Blu-ray Disc Player Features Safety Information 3 4 4 4 4 Warning Precautions Important Safety Instructions Disc Storage & Management Disc Handling Getting Started 10 10 10 11 11 13 13 14 14 15 16 17 18 18 19 19 Before using the User Manual Disc Types and Contents that can be played.
26 26 27 Connecting to an Audio System Case 1 : Connecting to an Audio System (HDMI Supported Amplifier) - Best Quality (Recommended) Case 2 : Connecting to an Audio System (Dolby Digital, DTS Amplifier) - Better Quality Case 3 : Connecting to an Audio System (2 Channel Amplifier) - Good Quality Connecting to the Network Cable Network Wireless Network 28 29 30 30 31 31 31 33 33 33 33 33 33 33 34 35 35 35 35 35 35 35 36 36 36 37 Before Starting (Initial Settings) Setting the Menu Display 3D TV Aspect BD W
Contents Setup 37 37 40 40 41 41 41 41 41 41 42 42 42 42 42 43 Network Network Settings Network Status BD-LIVE Internet Connection Language Security Parental Rating Change Password General Background Energy Saving Front Display Power On/Off Sound Support Software Upgrade Contact Samsung Basic Functions 44 44 44 44 44 44 44 45 45 45 45 45 45 45 46 46 46 46 46 47 47 47 47 48 Playing a Disc Playback Disc Structure Using the Disc menu/Title menu/Popup menu Using the Disc Menu Using the Title Menu Playi
49 49 49 50 50 50 51 52 Listening to Music Buttons on the Remote Control used for Music Playback Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 Playlist Playing back a Picture Playing a JPEG Disc Using the TOOLS button Playing back a USB Storage Device Notes on USB connection Network Services 53 53 55 56 57 57 57 Using Internet@TV Getting Started with Internet@TV Settings Samsung Apps BD-LIVE™ Software Upgrade Notification Using the AllShare Function Appendix 59 62 63 64 64 65 66 Trou
Getting Started Before using the User Manual Disc Types and Contents that can be played. Term Logo Icon h � Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO. DVD-RW(V) DVD-R � DVD+RW This involves a function available on recorded DVD+RW or DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.
▪ ▪ ▪ ▪ ▪ ▪ Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. Discs with PAL programs recorded on them cannot be played using this player. This player is compatible with the NTSC color system only. When a BD-J title is played, loading may take longer than a normal title, or some functions may perform slowly.
Getting Started DVD+R • This player can play back a DVD+R disc recorded and finalized with a DVD Video recorder. Ability to play back may depend on recording conditions. Audio CD (CD-DA) • This player can play back CD-DA format audio CD-RW/-R discs. • The player may not be able to play some CD-RW/-R discs due to the condition of the recording. CD-RW/-R • Use a 700MB(80 minutes) CD-RW/-R disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back.
Disc Type Blu-ray Region Code DVD-VIDEO Area a North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. b Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. c © 2010 Samsung Electronics Co.,Ltd. All rights reserved; No part or whole of this user’s manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd. Getting Started Both the player and the discs are coded by region.
Getting Started Logos of Discs that can be played Blu-ray Disc 3D Blu-ray Disc DTS-HD Master Audio DivX BD-LIVE Dolby TrueHD NTSC broadcast system in U.S.A, Canada, Korea, Japan Java Accessories Check for the supplied accessories below.
03 Front Panel Getting Started a b c def g h 1 DISC TRAY Opens to accept a disc. 3 REMOTE CONTROL SENSOR Detects signals from the remote control. DISPLAY Displays the playing status, time, etc. OPEN/CLOSE BUTTON Opens and closes the disc tray. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. POWER BUTTON Turns the player on and off. USB HOST A USB memory flash stick can be connected here and used as storage when connected to BD-LIVE.
Getting Started a Front Panel Display b c 1 2 3 16 IN DISC INDICATOR Lights when a disc is inserted or played back. CURRENT TIME AND STATUS INDICATOR Displays the play time and the current status. WIFI INDICATOR Lights when the wireless network is connected. English 01963B-BD-C5900-XAC-ENG.
Getting Started ab c 03 Rear Panel d g f e 1 WIRELESS LAN ADAPTER Connect the optional Wireless LAN Adapter (WIS09ABGN) here to use the Wireless network. LAN Can be used for network based services (See pages 53~58), BD-LIVE and software upgrades using a network connection. HDMI OUT 4 Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture or to your Receiver for the best quality sound.
Getting Started Remote Control Tour of the Remote Control Turn the player on and off. To open and close the disc tray. POWER TV POWER BONUSVIEW SOURCE Turn the TV on and off. (To operate your TV, please refer to page 19) After setup, allows you to set the input source on your TV. Press this to use Bonusview function. Press numeric buttons to operate options. Press this to switch the Blu-ray Disc/DVD’s subtitle language.
Button TV POWER TV SOURCE TV VOL (+/–) Function Used to switch the television on and off. Used to select an external source connected to the TV. Used to adjust the volume of the television. TV CH (,/.) Used to select the desired channel. TV MUTE ✎ Used to toggle the sound on and off. NOTE ▪ The functions listed above will not necessarily work on all televisions. If you encounter problems, operate the television directly.
Connections Connecting to a TV Case 1 : Connecting to a TV with an HDMI Cable - Best Quality (Recommended) 1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the player to the HDMI IN terminal of your TV. 2. Turn on the player and TV. 3. Press the input selector on your TV remote control until the HDMI signal from the player appears on your TV screen.
04 Case 2 : Connecting to a TV with DVI Cable - Best Quality (Recommended) 2. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player to the AUDIO IN (red and white) terminals of your TV. Connections 1. Using an HDMI-DVI cable, connect the HDMI OUT terminal on the rear of the player to the DVI IN terminal of your TV. 3. Turn on the player and TV. 4.
Connections Case 3 : Connecting to a TV (Component) - Better Quality - Connecting to your TV using Component video cables. - You will enjoy high quality images with accurate color reproduction. Component video separates the picture element into black and white(Y), blue(PB) and red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1.
04 Case 4 : Connecting to a TV (Video) - Good Quality 2. Turn on the player and TV. 3. Press the input selector on your TV remote control until the “VIDEO” signal from the player appears on the TV screen. • If you have set the remote control to operate your TV (See page 19), press the TV SOURCE button on the remote control and select VIDEO as the external source of the TV. Connections 1.
Connections Connecting to an Audio System • Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears. • Please set the audio in the menu screen according to the Amplifier. (See pages 33~35) • The position of HDMI terminals may vary depending on the Amplifier. Please refer to the user manual of your Amplifier. Case 1 : Connecting to an Audio System (HDMI Supported Amplifier) - Best Quality (Recommended) 1.
1. Using an optical cable, connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. 1. Using the audio cables, connect the AUDIO OUT (red and white) terminals on the rear of the player to the AUDIO IN (red and white) terminals of your Amplifier. 3. Turn on the player, TV and Amplifier. 3. Turn on the player, TV and Amplifier. 2.
Connections Connecting to the Network This player enables you to view network based services (See pages 53~58) such as Internet@TV and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1.
04 Wireless Network 1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the Wireless LAN Adapter on the rear panel of the player. 2. Set the network options. (See pages 37~41) Connections You can connect to network with a Wireless IP sharer.
Setup Before Starting (Initial Settings) 1. Turn on your TV after connecting the player. (When the player is connected to TV for the first time, player will turn on automatically and the Initial Settings screen will be displayed.) Initial Settings I On-Screen Language Select a language for the on-screen displays. English 5. Press the ◄► buttons to the select the desired Network Settings: Wired, Wireless or PBC (WPS), then press the ENTER button.
TV POWER BONUSVIEW SOURCE DISC MENU MENU RETURN EXIT 4 MENU Button : Press this to move to the home menu. 79 2 RETURN Button : Return to the previous menu. MUTE VOL 3 4 2. Press the ◄► buttons to select Settings, then press the ENTER button. ✎ NOTE ▪ When the player is connected to the network, select INTERNET@ FULL SCREEN REPEAT 1 Displays buttons available. 5. Press the EXIT button to exit the menu. INFO 3 2 6 4.
Setup Display You can configure various display options such as the TV Aspect, Resolution, etc. 3D Select whether to play a Blu-ray Disc with 3D contents in 3D Mode. TV Screen Size Lets you enter the actual screen size of your TV so that the player can adjust the image according to the screen size and display an optimal 3D image. (The maximum allowed screen size is 116 inches for this player.
• 16:9 Normal • 16:9 Wide Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected. You can view the full 16:9 picture on your widescreen TV. BD Wise is Samsung’s latest inter-connectivity feature. When you connect Samsung players with BD Wise to each other via HDMI, the optimum resolution will be set automatically. • On : The original resolution of the BD/DVD disc will be output to the TV.
Setup Resolution according to the output mode • Blu-ray Disc playback Output Setup HDMI / connected HDMI / not connected HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode 1080p@60F 480i - - Auto Optimal Resolution 1080p/1080i, Movie Frame(24Fs) on 1080p@24F 480i - - 1080i, Movie Frame(24Fs) off 1080i 480i 1080i 480i 480p 480p 480i 480p 480i 1080p, Movie Frame(24Fs) off 720p 480i 720p 480i - • DVD playback Output Setup 480i HDMI Mode Component/VIDEO Mode 1080p@
Movie Frame (24Fs) Setting the Movie Frame (24Fs) feature to On allows you to adjust the player’s HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. This menu can only be selected in 1080i or 1080p HDMI output resolution modes. • On : Movie Frame (24Fs) functions will work. • Off : Movie Frame (24Fs) functions will not work.
Setup Digital Output Selection Setup Connection PCM HDMI Receiver Dolby Digital DTS-HD MA Audio Stream Dolby Digital on DVD DTS Any HDMI Receiver or Optical HDMI Receiver PCM 2ch DTS re-encoded Dolby Digital PCM 2ch DTS re-encoded Up to 7.1ch PCM 2ch DTS re-encoded Dolby TrueHD Dolby Digital Up to 7.1ch PCM 2ch DTS re-encoded DTS-HD HRA DTS PCM 2ch PCM 2ch PCM 2ch Up to 5.1ch Up to 6.
Dynamic Range Control You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected. • Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack. • On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.
Setup ✎ NOTE ▪ This function is not available if the HDMI cable does ▪ ▪ not support CEC. If your Samsung TV has an n logo, then it supports the Anynet+ function. Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. BD Data Management Enables you to manage the downloaded contents from a Blu-ray disc that supports the BD-LIVE service.
Settings Display Audio System Network Language Security General Support ✎ Initial settings Disc Menu : Audio : Subtitle : Do you want to deactivate your device? Yes No NOTE ▪ This function can be operated when DivX(R) Registration function is deactivated. Network To begin setting up the network connection for your player, follow these steps: 1. In the Home menu, press the ◄► buttons to select the Settings, and then press the ENTER button. 2.
Setup Setting Up a Wired Connection - Manual If the Auto Setting does not work, you’ll need to set the Network Setting values manually. To get the Network setting values from most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed.
1. In the Network Settings menu, press the ▲▼ buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears. 2. Press the ▲▼ buttons to select the Internet Protocol Setup, and then press the ENTER button. the set up screens you used to set up your router or modem. Settings Display Audio System Network Language Security General Support Security Key Network Settings a b c lid Only) Security Key 1 4 7 .
Setup 12. To test the connection, press the ▼ button to select Network Test, and then press the ENTER button. Setting Up the Wireless Network Connection - Manual If the Auto Setting does not work, you need to enter the Network settng values manually. To get the Network setting values from most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4.
Language You can select the language you prefer for home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays. • Disc Menu : Select the language for the disc menu displays. • Audio : Select the language for disc audio. • Subtitle : Select the language for disc subtitles. ✎ NOTE ▪ The selected language will only appear if it is supported on the disc.
Setup Energy Saving You can reduce power consumption by setting the front panel to turn off automatically when there is no operation for 5 seconds. • On : The front panel will automatically turn off when there is no operation for 5 seconds. • Off : Energy Saving function is not used. Front Display Change the brightness of the front panel. • Auto : Dim during playback. • Dim : Dim the display window. • Bright : Brighten the display window.
05 You can also update software in any of the two ways as follows: Software update is the same as in the By Internet menu. Setup • USB : Visit www.samsung.com/bluraysupport, then download and store the latest software (RUF file) into a USB flash drive. Connect the USB flash drive to the USB port of the player (disc tray must be empty) to update the software, then follow the on-screen instructions. • CD/DVD : Visit www.samsung.
Basic Functions Playing a Disc Playback Using the Disc menu/Title menu/ Popup menu 1. Press the OPEN/CLOSE ( open the disc tray. ) button to 3. Press the OPEN/CLOSE ( close the disc tray. ) button to 2. Place a disc gently into the tray with the disc’s label facing up. 4. Press the PLAY ( ) button. Playback related buttons PLAY ( ) STOP ( ) PAUSE ( Stops playback. • If pressing the button once : The stop position will be memorized.
1. During playback, press the POPUP MENU button on the remote control. 2. Press the ▲▼◄► buttons or ENTER button to select the desired menu. ✎ NOTE ▪ Depending on the disc, the menu items may differ and this menu may not be available. Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching for a Desired Scene hzZyx • During playback, press the SEARCH ( ) button.
Basic Functions Repeat Playback Repeat the Title or Chapter hzZy Repeat the disc title or chapter. Depending on the disc, the Repeat function may not be available. 1. During playback, press the REPEAT button on the remote control. 2. Press the ▲▼ buttons to select Chapter or Title, then press the ENTER button. Repeat > Chapter 4. Press the ENTER button at the point where you want repeat play to stop (B). 5. To return to normal play, press the REPEAT button again. 6. Press the ENTER button.
You can also operate this function by pressing the AUDIO button on the remote control. 1. During playback, press the TOOLS button. ▪ ▪ 2. Press the ▲▼ buttons to select Audio. ▪ ✎ NOTE ▪ The ◄► indicator will not be displayed on the ▪ 3. Press the ◄► buttons to select the desired audio language. ▪ ▪ ▪ ▪ ▪ screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings.
Basic Functions Listening to Music • Dynamic : Choose this setting to increase Sharpness. • Normal : Choose this setting for most viewing applications. • Movie : This is the best setting for watching movies. • User : The user can adjust the sharpness and noise reduction function respectively. Setting BONUSVIEW ow Buttons on the Remote Control used for Music Playback h You can also operate this function by pressing the BONUSVIEW button on the remote control. ! 9 3.
NUMBER buttons : During the Playlist playback, press the desired track number. The selected track will be played. Playing an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc tray. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button.
Basic Functions Playing back a Picture 3. Press the ▲▼◄► buttons to move desired track, then press the YELLOW(C) button to check desired tracks. Repeat this procedure to select additional tracks. Music Playing a JPEG Disc 1. Insert a JPEG disc into the disc tray. 3 files selected 1/2 Page TRACK 003 TRACK 001 TRACK 002 TRACK 003 TRACK 004 2. Press the ◄► buttons to select the Photos, and then press the ENTER button. 00:04:27 00:05:57 00:03:41 00:04:07 3.
6. Press the ◄► buttons to select the desired Videos, Music or Photos, then press the ENTER button. 4-1. Press the BLUE(D) button. ✎ NOTE ▪ To enable the Background Music function, both Please activate Internet@TV service to enjoy a variety of Internet Services. music and MP3 files must be contained in the same folder. However, the sound quality can be affected by the bit rate of the MP3 file, the size of the photo and the encoding method.
Basic Functions Notes on USB connection • • • • • • • • • • • Supported devices: USB storage media, MP3 player, digital camera, USB card reader Does not support if a folder or file name is longer than 128 characters. A certain USB/digital camera device may not be compatible with the product. FAT16, FAT32 and NTFS file systems are supported. Connect directly to the product's USB port. Connecting through another cable may raise problems with USB compatibility.
Network Services 1. Connect the player to the network. (See pages 26~27) 2. Configure the network settings. (See pages 37~41) Internet@TV at a Glance 1 2 Recommended Using Internet@TV My Applications Connect this player to the network to download various for a fee or free-of-charge applications. Internet@TV brings useful and entertaining content and services directly from the web to your player such as news, weather forecasts, stock market quotes, games, movies and music.
Network Services Using the Keypad Through your remote, you can use the On-Screen Keypad in several Internet@TV applications to enter text. Pressing the SUBTITLE button on the remote while you are using the Screen Keypad lets you change the text fields to lower case, upper case, numbers and icons. 1 4 7 2 5 ghi Input Mode 9 tuv 0 a 6 jkl 8 pqrs 3 abc A 1 def 12. Press buttons on the remote to input the rest of ‘Challenger Rd., Ridgefield Park NJ’. 13. Press the ENTER button. 14.
1. Press the ▲▼◄► buttons to select the desired application and press the RED(A) button. Recommended Login My Applications User account : aaa by Date 1/3 Password : a Create [0~9] Enter PIN ' Cancel Samsung Apps Settings a Login b Mark as Favourite d Sort by ' Return 2. Enter the user account and password. Settings Create IDs and configure Internet@TV settings from this screen.
Network Services Service Manager Delete and lock applications installed to Internet@ TV. Lock Lock the application. Accessing a locked application requires the password. Delete Using the color buttons with the Samsung Apps • RED(A) (Login) : To log in to the internet service. • GREEN(B) (Thumbnail View) : To change the view mode. • BLUE(D) (Sort By) : To sort the applications by Featured, Most Downloaded, Most Recent or Name.
1. Check the size of the remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. 2. Insert a Blu-ray disc that supports BD-LIVE. 3. Select an item from various BD-LIVE service contents provided by the disc manufacturer. ✎ NOTE ▪ The way you use BD-LIVE and the provided contents may differ, depending on the disc manufacturer.
Network Services Shared Folder : Displays a list of the shared folders. 7 My Computer : Displays a list of the folders and files in the PC. 8 4. Select a folder to share from the My computer pane, and click the Share Folder Enabled icon ( ). (To remove a shared folder : Select a folder to remove from the shared folders, and click the Share Folder Disabled icon ( ).) 5. To apply the updated sharing state to the server, click the Set Change State icon ( 6.
Appendix 08 Troubleshooting PROBLEM SOLUTION No operation can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it. Reinstall batteries and try to operate the remote control again. Disc does not play.
Appendix Forgot password PROBLEM SOLUTION • Press the STOP ( ) button (on front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don’t use this unless absolutely necessary. • When the factory default settings are restored, all the user data stored in the BD data will be deleted. If you experience other problems.
I cannot connect to the BD-LIVE server. • Check whether the network connection is successful or not by using Network Test menu. (See page 40) • Check whether the USB memory device is connected with player or not. • The memory device must have at least 1GB of free space to accommodate the BD-LIVE service. You can check the available size in BD Data Management. (See page 36) • Please check whether the BD-LIVE Internet Connection menu is set to Allow(All).
Appendix A Accessories Ad-hoc Anynet+ (HDMI-CEC) Audio Language AllShare B BD Wise BD Data Management BD-LIVE BONUSVIEW Background Music 14 27 35 47 57~58 31 36 40, 57 48 50 C Component Cable Network Camera Angle 22 26 47 D Digital Output 33~34 Dynamic Range Control 35 Downmixing Mode 35 DTS Neo:6 35 DST (Daylight Saving Time) 36 DivX 36~37 Disc Menu 44 Disc Structure 44 H HDMI 20, 35 HDMI Supported Amplifier 24 HDMI Deep Color 33 I Internet@TV Initial Settings 62 J Index JPEG M Movie Fr
3.8 Ibs Operating Temperature Range +41°F to +95°F Dimensions Operating Humidity Range BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video Video Output Video/Audio Component Video Audio Output 17.1 (W) X 8.1 (D) X 1.7 (H) inches 10 % to 75 % Reading Speed : 4.917 m/sec Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec.
Appendix Compliance and Compatibility Notice NOT ALL discs are compatible • Subject to the restrictions described below and those noted throughout this Manual, including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. • Discs other than the above cannot and/or is not intended to be played by this player.
08 Appendix • Many Blu-ray Disc/DVD discs are encoded with copy protection. Because of this, you should only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected Blu-ray Disc/DVD discs. • This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. • Under the U.S.
Appendix License • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. • Manufactured under license under U.S. Patent #’s : 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area ` North America Contact Center Web Site Canada 1-800-SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Mexico ` Latin America Argentine Brazil Chile Nicaragua Honduras Costa Rica Ecuador El Salvador Guatemala Jamaica Panama Puerto Rico Rep.
HEADQUARTERS Samsung Electronics Canada Inc ., 55 Standish Court Misisauga , Ontario L5R 4B2 Canada TEL: 1-800-SAMSUNG (1-800-7267864) www.samsung.com/ca AK68-01963B-00 01963B-BD-C5900-XAC-ENG.
BD-C5900 Lecteur de disque Blu-ray guide d'utilisation imaginez les possibilités Merci d'avoir acheté ce produit Samsung. Profitez de tous les avantages offerts par notre service intégral ! Enregistrez votre produit dès aujourd’hui sur le portail www.samsung.com/register et sélectionnez Enregistrement de produit 01963B-BD-C5900-XAC-FRC.
Caractéristiques Principales Caractéristiques des disques Blu-ray Les disques Blu-ray prennent en charge des vidéos HD dont la qualité est la meilleure de l'industrie. La capacité supérieure de ces supports leur assure une absence totale de compromis en termes de qualité. En outre, un disque Blu-ray est de format et d'apparence identiques à ceux d'un DVD. Les caractéristiques suivantes des disques Bluray dépendent du disque et peuvent varier.
Directives de Sécurité 02 Avertissement ATTENTION L’éclair et la flèche inclus dans le triangle représentent un avertissement à l’égard de tensions dangereuses se trouvant à l’intérieur du produit. AVERTISSEMENT RISQUE D’ÉLECTROCUTION NE PAS OUVRIR ATTENTION : AFIN DE RÉDUIRE LES RISQUES DE CHOCS ÉLECTRIQUES, NE PAS RETIRER LE COUVERCLE (OU LE PANNEAU ARRIÈRE). L'APPAREIL NE CONTIENT PAS DE PIÈCES EXIGEANT UN ENTRETIEN DE LA PART DE L’UTILISATEUR. CONFIER L’ENTRETIEN À UN PERSONNEL QUALIFIÉ.
Directives de Sécurité Consignes de précautions Consignes de sécurité importantes Lisez attentivement ces directives de fonctionnement avant d’utiliser l’appareil. Observez toutes les consignes de sécurité énumérées plus bas. Conservez ces directives d’opération en vue d’une consultation ultérieure. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Lisez ces directives. Conservez ces directives. Tenez compte de tous les avertissements. Suivez toutes les directives.
Précautions de manipulation • N'écrivez pas sur la face imprimée avec un stylo à bille ou un crayon. • N'utilisez pas de liquides de nettoyage pour disques de vinyle en aérosol ou d'antistatiques. Évitez également d'utiliser des produits chimiques volatiles, tels que le benzène ou un solvant. • N'apposez pas d'étiquettes ou d'autocollants sur les disques. (N'utilisez pas des disques réparés avec du ruban adhésif ou contenant des restes d'autocollants.
Table des Matières Caractéristiques Principales 2 2 Caractéristiques des disques Blu-ray Caractéristiques du lecteur Directives de Sécurité 3 4 4 4 4 Avertissement Consignes de précautions Consignes de sécurité importantes Rangements et gestion des disques Manipulation des disques Premiers Pas 10 10 10 11 11 13 13 14 14 15 16 17 18 18 19 19 Avant de consulter le guide d’utilisation Types de disque et contenu pour la lecture.
26 26 27 Raccordement à un système audio Cas 1 : Raccordement à un système audio (Amplificateur prenant en charge l'interface HDMI) - Meilleur type de connexion (Recommandé) Cas 2 : Raccordement à un système audio (Dolby numérique, amplificateur DTS) - Meilleure qualité Cas 3 : Raccordement à un système audio (amplificateur à 2 canaux) - Bonne qualité Branchement sur le réseau Réseau filaire Réseau sans fil 28 29 30 30 31 31 31 33 33 33 33 33 33 33 34 35 35 35 35 35 35 35 36 36 36 37 37 37 40 40 Avant le
Table des Matières Configuration 41 41 41 41 41 41 42 42 42 42 42 43 Langue Sécurité Classement parental Modifier mot de passe Général Arrière-plan Mode éco.
49 49 49 50 50 50 51 52 Écouter de la musique Touches de la télécommande utilisées pour la lecture de plages musicales Lecture d'un CD Audio (CD-DA)/MP3 Lecture en boucle de CD Audio (CD-DA)/MP3 Liste de lecture Lecture d'une image Lecture d’un disque contenant des fichiers JPEG Utilisation de la touche TOOLS Lecture d’un périphérique de stockage USB Notes sur la connexion USB Services Réseau 53 53 55 56 57 57 57 Utilisation du service Internet@TV Premiers pas avec Internet@TV Paramètres Samsung Apps BD
Premiers Pas Avant de consulter le guide d’utilisation Types de disque et contenu pour la lecture. Terme Logo Icône h � Z BD-ROM BD-RE/-R DVD-VIDEO Définition Cela présuppose une fonction disponible sur un BD-ROM. Cela présuppose une fonction disponible sur un disque BD-RE/-R enregistré en format BD-RE. Cela présuppose une fonction disponible sur un DVD-VIDÉO. DVD-RW(V) DVD-R DVD+RW � Cela présuppose une fonction disponible sur des disques DVD+RW ou DVD-RW(V)/ DVD-R/+R enregistrés et finalisés.
▪ ▪ ▪ ▪ ▪ ▪ Compatibilité des disques Blu-ray Le disque Blu-ray est un nouveau format toujours en évolution. En conséquence, des problèmes de compatibilité du disque sont possibles. Tous les disques ne sont pas compatibles et tous ne peuvent être lus. Pour plus de renseignements, reportez-vous aussi à la rubrique Avis de conformité et de compatibilité du présent guide. BD-ROM Ce disque Blu-ray ne peut être que lu. Ce lecteur peut lire des disques BD-ROM préenregistrés de type commercial.
Premiers Pas DVD+R • Ce lecteur peut lire des disques DVD+R enregistrés et finalisés à l’aide d’un graveur vidéo DVD. La compatibilité de lecture peut dépendre des conditions d’enregistrement. CD audio (CD-DA) • Ce lecteur peut lire des disques audio de format CD-DA, CD-RW/-R. • Le lecteur ne peut pas lire certains disques CD-RW/-R du fait des conditions d'enregistrement. CD-RW/-R • Utilisez un disque CD-RW/-R de 700Mo(80 minutes).
Types de disque Code régional a Blu-ray b c 1 2 DVD-VIDEO © 2010 Samsung Electronics Co.,Ltd. Tous droits réservés. Le présent manuel d’utilisation ne peut être reproduit ou copié, partiellement ou dans son intégralité, sans le consentement écrit et préalable de Samsung Electronics Co.,Ltd. Premiers Pas Le lecteur et les disques sont codés par région. Ces codes régionaux doivent correspondre pour permettre la lecture du disque. Si les codes ne correspondent pas, le disque ne pourra pas être lu.
Premiers Pas Logo des disques compatibles Disques Blu-ray Disques Blu-ray 3D DTS-HD Master Audio DivX BD-LIVE Dolby TrueHD NTSC système de diffusion aux États-Unis, au Canada, en Corée et au Japon Java Accessoires Vérifiez la présence de tous les accessoires indiqués plus bas.
03 Façade Premiers Pas a b c 1 2 3 4 5 6 7 8 def g h TIROIR DISQUE S’ouvre pour insérer un disque. CAPTEUR DE LA TÉLÉCOMMANDE Il détecte tout signal venant de la télécommande. AFFICHAGE Affiche l’état de la lecture, l’heure, etc. OUVERTURE/FERMETURE Permet d'ouvrir et de fermer le tiroir disque. TOUCHE ARRÊT Permet d'arrêter la lecture du disque. TOUCHE LECTURE/PAUSE Permet de lire un disque ou d’interrompre la lecture. TOUCHE LIMENTATION Turns the player on and off.
Premiers Pas a Affichage en façade b c 1 2 3 16 TÉMOIN DE DISQUE CHARGÉ S’allume lorsqu’un disque est inséré ou en cours de lecture. TÉMOIN D'HEURE ET D’ÉTAT Affiche l’heure et l'état actuel. TÉMOIN WIFI S’allume si l’appareil est connecté à un réseau sans fil. Français 01963B-BD-C5900-XAC-FRC.
Premiers Pas ab c 03 Panneau arrière d g f e 1 WIRELESS LAN ADAPTER Branchez l'adaptateur de réseau local sans fil (WIS09ABGN) ici si vous souhaitez utiliser le réseau sans fil. 2 LAN Peut servir aux services réseau (Reportez-vous aux pages 53 à 58), à BD-LIVE et aux mises à niveau en utilisant une connexion réseau. 3 HDMI OUT 4 À l’aide d’un câble HDMI, raccordez la borne de sortie HDMI à la borne d’entrée HDMI de votre téléviseur.
Premiers Pas Télécommande Aperçu de la télécommande Pour allumer et éteindre le lecteur. Pour ouvrir et fermer le tiroir disque. POWER TV POWER BONUSVIEW SOURCE Permet d’allumer et d’éteindre le téléviseur. (Pour utiliser votre téléviseur, veuillez vous reporter à la page 19) Après la configuration, vous permet de définir la source d'entrée de votre téléviseur. Appuyez sur cette touche pour accéder à la fonction Bonusview. Appuyez sur les touches numériques pour activer les options.
Touche Fonction Permet d’allumer et d’éteindre le téléviseur. Permet de sélectionner une source TV SOURCE externe connectée au téléviseur. Permet de régler le volume sonore du TV VOL (+/–) téléviseur. Permet de sélectionner la chaîne TV CH (,/.) souhaitée. Permet de désactiver et de réactiver les TV MUTE haut-parleurs. TV POWER ✎ REMARQUE ▪ Il est possible qu'une partie de ces fonctions ne puisse pas être activées sur certains téléviseurs.
Raccordements Raccordement à un téléviseur Cas 1 : Raccordement à un téléviseur à l'aide d’un câble HDMI - Meilleur type de connexion (Recommandé) 1. À l’aide d’un câble HDMI, raccordez la borne HDMI OUT située à l’arrière du lecteur à la borne HDMI IN de votre téléviseur. 2. Allumez le lecteur et le téléviseur. 3. Appuyez sur la touche de sélection d’entrée de la télécommande de votre téléviseur jusqu’à ce que le signal HDMI du lecteur apparaisse à l’écran.
04 Cas 2 : Raccordement à un téléviseur à l’aide d’un câble DVI - Meilleur type de connexion (Recommandé) 2. À l’aide de câbles audio, raccordez les bornes AUDIO OUT (rouge et blanche) situées à l’arrière du lecteur aux bornes AUDIO IN (rouge et blanche) de votre téléviseur. Raccordements 1. À l’aide d’un câble HDMI-DVI, raccordez la borne de sortie HDMI OUT située à l’arrière du lecteur à la borne d’entrée DVI IN de votre téléviseur. 3. Allumez le lecteur et le téléviseur. 4.
Raccordements Cas 3 : Raccordement à un téléviseur (Component) - Meilleure qualité - Raccordement de votre téléviseur à l’aide de câbles vidéo composante. - Vous profiterez d’images de haute qualité aux couleurs précises. La vidéo composante sépare les éléments de l’image en signaux noir et blanc (Y), bleu (PB) et rouge (PR) pour reproduire des images lumineuses et plus claires. (Les signaux audio sont transmis par la sortie audio.) 1.
04 Cas 4 : Raccordement à un téléviseur (Vidéo) - Bonne qualité 2. Allumez le lecteur et le téléviseur. 3. Appuyez sur la touche de sélection d’entrée de la télécommande de votre téléviseur jusqu’à ce que le signal « VIDEO » du lecteur apparaisse à l’écran. • Si vous avez réglé la télécommande pour contrôler votre téléviseur (Reportez-vous à la page 19), appuyez sur la touche TV SOURCE de la télécommande et sélectionnez la source externe du téléviseur. Raccordements 1.
Raccordements Raccordement à un système audio • Veuillez baisser le volume avant d'allumer l'amplificateur. Un son fort et soudain peut endommager vos enceintes acoustiques et votre ouïe. • Veuillez régler les paramètres audio à l'aide de l'écran de menu en fonction de l'amplificateur. (Reportez-vous aux pages 33 à 35) • La position des bornes HDMI peut varier en fonction de l’amplificateur. Veuillez vous reporter au guide d'utilisation de votre amplificateur.
2. À l’aide du/des câble(s) vidéo, raccordez les bornes HDMI, COMPONENT ou VIDEO OUT situées à l’arrière du lecteur aux bornes HDMI, COMPONENT ou VIDEO IN de votre téléviseur. (Reportez-vous aux pages 20 à 23) 3. Allumez le lecteur, le téléviseur et l’amplificateur. 4. Appuyez sur la touche de sélection d'entrée de l'amplificateur pour sélectionner l’entrée externe afin de pouvoir entendre la reproduction sonore du lecteur.
Raccordements Branchement sur le réseau Ce lecteur vous permet d'afficher les services réseau (Reportez-vous aux pages 53 à 58) comme Internet@TV et BD-LIVE, de même qu’aux mises à niveau de logiciels à partir d’une connexion réseau. Nous vous recommandons d’utiliser un point d’accès ou un routeur IP pour le réseau. Pour de plus amples renseignements sur la connexion au routeur, reportez-vous au Guide d’utilisation du routeur ou contactez le fabricant du routeur pour obtenir de l’assistance technique.
04 Réseau sans fil Raccordements Vous pouvez brancher l’appareil au réseau à l’aide d’un commutateur IP Sharer sans fil. 1. Un point d’accès ou un routeur IP sans fil est requis pour établir une connexion réseau sans fil. Branchez l’adaptateur de réseau local sans fil à l’adaptateur de réseau sans fil situé sur le panneau arrière du lecteur. 2. Configurez les options du réseau.
Configuration Avant le démarrage (paramètres initiaux) 1. Allumez votre téléviseur après avoir connecté le lecteur. (Lorsque le lecteur est raccordé à un téléviseur pour la première fois, le lecteur s’allume automatiquement et l’écran de paramétrage initial s’affiche.) Initial Settings I On-Screen Language Select a language for the on-screen displays. 5. Appuyez sur les touches ◄► pour sélectionner les paramètres réseau souhaités : Câble, Sans fil, ou PBC (WPS), puis appuyez sur la touche ENTRÉE.
TV POWER BONUSVIEW SOURCE Configuration du menu DISC MENU MENU 1 INFO RETURN EXIT 4 Touche MENU : Appuyez sur cette touche pour 79 accéder au menu d’accueil. VOL : Permet de CH revenir au menu Touche RETURN précédent. Touche ENTRÉE/DIRECTION : Déplacez le curseur ou sélectionnez un élément. Sélectionnez l’élément en surbrillance. Confirmez le réglage AK59-00104R 3 4 6 Affiche les touches pouvant être utilisées. 2.
Configuration Affichage Il vous est possible de régler plusieurs options d’affichage comme le format d’image, la résolution, etc. 3D Sélectionnez le mode 3D si vous souhaitez la lecture du disque Blu-ray avec un contenu 3D. Taille écran TV Vous permet d’entrer la taille réelle de l’écran de votre téléviseur de façon à régler l’image selon la taille de l’écran et à afficher une image optimale en 3D. (Pour ce lecteur, la taille maximum possible de l’écran est de 116 po.
• 16:9 Normal • 16:9 Large • 4:3 Letter Box • 4:3 Pan-Scan Certaines vidéos (source 4:3) s'affichent au format 4:3 à colonnes (barres noires de chaque côté de l'image) même si vous avez défini le format normal 16:9. Vous pouvez voir l’image 16:9 en entier sur votre téléviseur à écran large.
Configuration Résolution en fonction du mode de sortie • Lecture du disque Blu-ray Configuration Sortie HDMI/raccordé HDMI/non raccordé Mode HDMI Mode Composant/VIDÉO Mode Composant Mode VIDÉO 1080p@60F 480i - - Auto Résolution optimale 1080p/1080i, Cadre vidéo (24Fs) Activé 1080p@24F 480i - - 1080i, Cadre vidéo (24Fs) Arrét 1080i 480i 1080i 480i 480p 480p 480i 480p 480i 1080p, Cadre vidéo (24Fs) Arrét 720p 480i 720p 480i - • Lecture DVD Configuration 480i Sortie Mode H
Trame vidéo (24Fs) Le réglage de la fonction Trame vidéo (24Fs) sur Activé vous permet de régler la sortie HDMI du lecteur Blu-ray à 24 images par seconde afin d’améliorer la qualité du film. Vous pouvez profiter de l'option Trame vidéo (24Fs) uniquement avec un téléviseur pouvant prendre en charge cette cadence de défilement. Ce menu ne peut être sélectionné qu’en résolution de sortie HDMI 1080i ou 1080p. • Activé : La fonction Trame vidéo (24Fs) fonctionne.
Configuration Sélection de la sortie numérique Configuration Récepteur HDMI Connexion PCM Bitstream (Re-encode) PCM Optique Jusqu’à 7,1 ca PCM 2ch Dolby Digital Jusqu’à 5,1 ca PCM 2ch Dolby Digital Jusqu’à 7,1 ca PCM 2ch Plus Récepteur HDMI ou optique Codé à nouveau par DTS Codé à nouveau par DTS Flux de données audio sur le disque Dolby TrueHD Jusqu’à 7,1 ca PCM 2ch Blu-ray DTS Jusqu’à 6,1 ca PCM 2ch Codé à nouveau par DTS DTS-HD MA Jusqu’à 7,1 ca PCM 2ch Codé à nouveau par DTS DTS-HD HRA Jusq
Contrôle de la dynamique Vous pouvez régler le volume à basse intensité tout en entendant clairement les dialogues. Ceci est activé uniquement lorsqu’un signal Dolby numérique est détecté. • Auto : La compression dynamique sera automatiquement réglée selon les données fournies par le système Dolby TrueHD Soundtrack.
Configuration ✎ REMARQUE ▪ Cette fonction n’est pas disponible si le câble HDMI ▪ ▪ ne peut pas prendre en charge le format CEC. Si votre téléviseur TV possède le logo n, il peut prendre en charge la fonction Anynet+. Selon votre type de téléviseur, certaines résolutions de sortie HDMI peuvent ne pas fonctionner. Reportez-vous au guide d'utilisation de votre téléviseur. Gestion données BD Vous permet de gérer le contenu téléchargé d’un disque Blu-ray qui prend en charge le service BD-LIVE.
Paramètres Affichage Paramètre initial Audio Système Réseau Voulez-vous désactiver votre périphérique? Langue Sécurité Oui Non Général Assistance ✎ REMARQUE ▪ Cette fonction peut être exécutée lorsque la fonction d’enregistrement du DivX(R) est désactivée. Config. Réseau Suivez les étapes ci-après pour effectuer la configuration de la connexion réseau : 1. Dans le menu d'accueil, appuyez sur les touches ◄► pour sélectionner Paramètres, appuyez sur la touche ENTRÉE. 2.
Configuration Configuration d’une connexion câblée Manuelle Si la configuration automatique ne fonctionne pas, vous devrez définir manuellement les valeurs de configuration du réseau. Pour obtenir les valeurs de configuration de réseau de la plupart des ordinateurs Windows, suivez les directives ci-après : 1. Cliquez à droite sur l’icône Réseau dans le coin inférieur droit de l’écran. 2. Dans le menu contextuel, cliquez sur État. 3. Si la boîte de dialogue apparaît, cliquez sur l’onglet Assistance. 4.
Paramètre réseau Affichage Point d’accès Sélection : Non sélectionné Audio Config. prot. Internet : Auto Système 0 0 Adresse IP : 0 Réseau 0 0 Masque sous-réseau : 0 Langue 0 0 Passerelle : 0 Sécurité DNS : Auto Général 0 0 Serveur DNS : 0 Assistance \ 0 0 0 0 a PBC (WPS) > Déplacer " Sélectionner ' Retour 4. Si vous avez sélectionné Auto, appuyez sur la touche ▲ pour accéder à Point d'accès Sélection, puis appuyez sur la touche ENTRÉE. La fonction Réseau cherche des réseaux sans fil disponibles.
Configuration 12. Pour vérifier la connexion, appuyez sur la touche ▼ pour sélectionner Test réseau, puis appuyez sur la touche ENTRÉE. Configuration de la connexion réseau sans fil - Manuelle Si la configuration automatique ne fonctionne pas, vous devrez définir manuellement les valeurs de configuration du réseau. Pour obtenir les valeurs de configuration de réseau de la plupart des ordinateurs Windows, suivez les directives ci-après : 1.
Langue Vous pouvez sélectionner votre langue préférée pour les menus d’accueil, les menus du disque, etc. • Menu A l’écran : Permet de sélectionner la langue pour l'affichage. • Menu du Disque : Permet de sélectionner la langue pour les menus du disque. • Audio : Permet de sélectionner la langue du son du disque. • Sous-titre : Permet de sélectionner la langue des sous-titres du disque. ✎ REMARQUE ▪ La langue sélectionnée ne s’affiche que si elle est prise en charge par le disque.
Configuration Mode éco. Vous pouvez réduire la consommation d'énergie en configurant la désactivation automatique du panneau frontal lorsqu'aucune touche n'est utilisée pendant 5 secondes. • Activé : Le panneau frontal s’éteint automatiquement si aucune touche n'est utilisée pendant 5 secondes. • Arrét : La fonction d’économie d’énergie n'est pas utilisée.
05 Vous pouvez effectuer la mise à jour du logiciel en utilisant une des deux méthodes expliquées cidessous : La mise à jour du logiciel s’effectue de la même façon que pour le menu Par Internet. Configuration • USB : Allez à www.samsung.com/bluraysupport, puis téléchargez et sauvegardez la dernière mise à jour (fichier RUF) sur la clé USB.
Fonctions de base Lecture d’un disque Lecture 1. Appuyez de nouveau sur la touche OUVERTURE/ FERMETURE ( ) pour ouvrir le tiroir disque. 2. Placez délicatement un disque dans le tiroir disque, face étiquette vers le haut. 3. Appuyez de nouveau sur la touche OUVERTURE/ FERMETURE ( ) pour refermer le tiroir disque. 4. Appuyez sur la touche LECTURE ( ). Touches liées à la lecture : LECTURE ( ARRÊT ( PAUSE ( ✎ ) ) ) Lance la lecture. Arrête la lecture.
1. Appuyez sur la touche MENU CONTEXTUEL de votre télécommande pendant la lecture. 2. Appuyez sur les touches ▲▼◄► ou ENTRÉE pour sélectionner le menu désiré. ✎ REMARQUE ▪ Selon le lecteur, il est possible que les éléments de menu diffèrent et que ce menu ne soit pas disponible. Utilisation des fonctions Rechercher et Ignorer Vous pouvez parcourir rapidement un chapitre ou une piste pendant la lecture et utiliser la fonction de saut pour passer à la prochaine sélection.
Fonctions de base Lecture en boucle (répétition) Répétition du titre ou du chapitre hzZy Permet d’effectuer la lecture en boucle du titre ou du chapitre du disque. Selon le disque, la fonction de répétition pourrait ne pas être disponible. 1. Appuyez sur la touche REPEAT de votre télécommande pendant la lecture. 2. Appuyez sur les touches ▲▼ pour sélectionner Chapitre ou Titre, puis appuyez sur la touche ENTRÉE. Répétition > Chapitre 3.
Cette fonction peut aussi être activée en appuyant sur la touche AUDIO de la télécommande. ▪ 1. Appuyez sur la touche TOOLS en cours de lecture. ▪ 3. Appuyez sur les touches ◄► pour sélectionner la langue audio souhaitée. ▪ 2. Appuyez sur les touches ▲▼ pour sélectionner Audio. ✎ REMARQUE ▪ L’indicateur ◄► ne s’affichera pas à l’écran si la ▪ ▪ ▪ ▪ ▪ section BONUSVIEW ne contient pas de paramètres audio BONUSVIEW.
Fonctions de base Écouter de la musique • Dynamique : Sélectionnez ce paramètre pour augmenter la définition. • Normal : Choisissez ce réglage pour la plupart des visionnements. • Film : Il s’agit du meilleur réglage pour regarder des films. • Utilisateur : L’utilisateur peut régler respectivement la fonction de netteté et de réduction de bruit. Réglage de BONUSVIEW h Vous pouvez également utiliser cette fonction en appuyant sur la touche BONUSVIEW de la télécommande. 1.
Touches NUMÉRIQUES : Durant la lecture de la Liste de lecture, appuyez sur la touche numérique souhaitée. La piste sélectionnée sera lue. Lecture d'un CD Audio (CD-DA)/MP3 1. Insérez un CD Audio (CD-DA) ou un disque MP3 dans le tiroir disque. • Pour un CD Audio (CD-DA), la première piste est lue automatiquement. • Pour un disque MP3, appuyez sur les touches ◄► pour sélectionner Musique, puis appuyez sur la touche ENTRÉE.
Fonctions de base Lecture d'une image 3. Appuyez sur la touche ▲▼◄► pour aller à la plage désirée, puis appuyez sur la touche JAUNE(C) pour vérifier les pistes désirées. Répétez cette procédure pour sélectionner des pistes supplémentaires. Musique TRACK 001 TRACK 002 TRACK 003 TRACK 004 1. Insérez un disque JPEG sur le tiroir disque. 00:04:27 00:05:57 2. Appuyez sur les touches ◄► pour sélectionner les Photos, puis appuyez sur ENTRÉE.
6. Appuyez sur les touches ◄► pour sélectionner les Vidéos, les Fichiers musicaux ou les Photos, puis appuyez sur la touche ENTRÉE. 4-1. Appuyez sur la touche BLEU(D). Activez le service Internet@TV pour profiter de nombreux services Internet. ✎ REMARQUE ▪ Sert à activer la fonction Fond musical, à la fois USB pour les fichiers musicaux et MP3 contenus dans le même dossier.
Fonctions de base Notes sur la connexion USB • Périphériques pris en charg : Support de stockage USB, lecteur MP3, caméra numérique, lecteur de carte USB • Prise en charge non assurée pour les dossiers ou fichiers dont le nom excède 128 caractères. • Le produit n’est pas compatible avec tous les périphériques de caméra numérique / USB. • Les systèmes de fichiers FAT16, FAT32 et NTFS ne sont pas pris en charge. • Effectuez la connexion directement au port USB du produit.
Services Réseau 1. Raccordez le lecteur au réseau. (Reportez-vous aux pages 26 à 27) 2. Configurez les paramètres réseau. (Reportez-vous aux pages 37 à 41) Aperçu du service Internet@TV 1 2 Utilisation du service Internet@TV Premiers pas avec Internet@TV 1. Allez au menu d’accueil. Mes applications Samsung Apps 6 1 2 3 You Tube internet radio Activez le service Internet@TV pour profiter de nombreux services Internet. 4 Pas de Disque a Changer périph d Afficher périph. " Entrer 2.
Services Réseau Utilisation du clavier numérique Grâce à votre télécommande, vous pouvez utiliser le Clavier à l’écran dans plusieurs applications Internet@TV afin d’entrer du texte. Appuyez sur le bouton SUBTITLE de la télécommande tout en utilisant le Clavier à l'écran afin de modifier le mode d’entrée dans les champs de texte en minuscules, majuscules, chiffres ou icônes. 1 4 7 2 9 tuv 0 a 6 jkl 8 pqrs Mode de 3 abc 5 ghi A 1 def 12.
1. Appuyez sur les touches ▲▼◄► pour sélectionner l’application souhaitée, puis appuyez sur la touche ROUGE(A). Recommandé Connexion Mes applications Compte utilisateur : aaa par nom 1/3 Mot de passe : a Créer [0~9] Saisir PIN ' Annuler Samsung Apps Paramètres a Connexion b Marquer comme favori d Trier par ' Retour 2. Saisissez le compte d’utilisateur et le mot de passe. Paramètres Création d'une identification et configuration des réglages du service Internet@TV à partir de cet écran.
Services Réseau Gestionnaire service Utilisation des touches de couleur avec les applications Samsung Permet de supprimer et de verrouiller des applications installées sur Internet@TV. Verrouil. Permet de verrouiller l’application. L’accès à une application verrouillée exige le mot de passe. Supprimer • ROUGE(A) (Connexion) : Permet de se brancher au service Internet. • VERT(B) (Affichage Vignettes) : Permet de modifier le mode de visualisation.
BD-LIVE™ Comment utiliser la fonction Partage complet 07 Une fois le lecteur connecté au réseau, vous pouvez profiter de plusieurs contenus de services liés au cinéma en utilisant un disque compatible avec la technologie BD-LIVE. 1. Vérifiez qu’il reste suffisamment d’espace disponible sur le disque. La mémoire du périphérique doit disposer au minimum de 1 Go d’espace libre pour pouvoir prendre en charge les services BD-LIVE. 2. Insérez un disque Blu-ray compatible avec les services BD-LIVE. 3.
Services Réseau Dossier partagé : Affiche une liste de fichiers partagés. 7 Poste de travail : Affiche une liste de dossiers et fichiers de l’ordinateur. 8 4. Sélectionnez un dossier à partager dans le volet Poste de travail, puis cliquez sur l'icône Activation du partage de fichiers ( ). (Pour supprimer un dossier partagé : Sélectionnez un dossier pour supprimer les dossiers partagés, puis cliquez sur l’icône Désactivation du partage de dossiers ( ). 5.
Annexe 08 Dépannage PROBLÈME Annexe Avant de contacter le centre de service technique, effectuez les vérifications élémentaires suivantes: SOLUTION La télécommande ne fonctionne pas. • Vérifiez les piles de la télécommande. Il pourrait s’avérer nécessaire de les remplacer. • Utilisez la télécommande à une distance inférieure à 6 mètres (20 pieds).
Annexe PROBLÈME SOLUTION Mot de passe oublié • Retirez le disque et appuyez sur la touche ARRÊT ( ) située en façade du lecteur pendant plus de 5 secondes. Tous les réglages retournent aux réglages du fabricant. À ne pas utiliser à moins que cela ne soit absolument nécessaire. • Si les réglages par défaut sont rétablis, toutes les données utilisateurs stockées sur le disque Blu-ray seront supprimées. Si vous rencontrez d’autres difficultés.
Je ne peux pas me brancher au serveur BD-LIVE. • Vérifiez que la connexion réseau fonctionne correctement au moyen du menu de test de réseaux. (Reportez-vous à la page 40) • Assurez-vous que le périphérique USB est branché au lecteur. • La mémoire du périphérique doit disposer au minimum de 1Go d’espace libre pour pouvoir prendre en charge les services BD-LIVE. • Vous pouvez vérifier le format disponible dans le Gestion des données BD.
Annexe Général Disques Specifications Poids 3.
08 Avis de conformité et de compatibilité Annexe Les disques ne sont pas TOUS compatibles. • Conformément aux limitations décrites ci-dessous et à celles mentionnées ailleurs dans ce guide, incluant dans la section traitant sur les types de disques et leurs caractéristiques, les disques suivants peuvent être lus : les disques présenregistrés de type commercial BD-ROM, DVD-Vidéo et Audio CD (CD-DA), BD-RE/-R, DVD-RM/-R; et CD-RW/CD-R.
Annexe • De nombreux disques Blu-ray/DVD sont protégés contre la copie. C’est pourquoi vous devez raccorder votre lecteur directement à votre téléviseur et non à un magnétoscope. Le branchement à un magnétoscope entraîne une déformation de l'image lorsque vous tentez de lire des disques Blu-ray/ DVD protégés contre la copie. • Ce produit intègre la technologie de protection des droits d’auteur, protégée par des brevets américains et d’autres droits de propriété intellectuels relatifs à Rovi Corporation.
08 License Annexe • Fabriqué sous licence de Dolby Laboratories. « Dolby » et le symbole du double-D sont des marques de commerce de Dolby Laboratories. • Fabriqué sous licence des brevets américains nos : 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 et autres brevets américains ou mondiaux, délivrés et en instance.
GARANTIE LIMITEE A L’ACHETEUR INITIAL Samsung Electronics Canada Inc. (SECA) garantit ce produit contre tout défaut de fabrication. SECA garantit aussi que si cet appareil ne fonctionne pas convenablement durant la période de garantie SECA se réservera le droit de réparer ou de remplacer l’appareil défectueux. Toutes les réparations sous garantie doivent être effectuées par un Centre de service autorisé SECA.
Contacter SAMSUNG À TRAVERS LE MONDE Si vous avez des questions ou commentaires concernant les produits Samsung, veuillez communiquer avec le service à la clientèle SAMSUNG. Area ` North America Contact Center Web Site Canada 1-800-SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Mexico ` Latin America Argentine Brazil Chile Nicaragua Honduras Costa Rica Ecuador El Salvador Guatemala Jamaica Panama Puerto Rico Rep.
SIÈGE SOCIAL SAMSUNG ELECTRONIQUE CANADA INC., 55 STANDISH COURT MISSISSAUGA, ONTARIO L5R 4B2 CANADA TEL: 1-800-SAMSUNG (1-800-7267864) www.samsung.com/ca AK68-01963B-00 01963B-BD-C5900-XAC-FRC.