User Manual
Table Of Contents
- Safety information
- What you need to know about the safety instructions
- Important safety symbols and precautions:
- State of California Proposition 65 Warning
- Important safety precautions
- Severe warning signs for transportation and site
- Critical installation warnings
- Installation cautions
- Critical usage warnings
- Usage cautions
- Cleaning cautions
- Critical disposal warnings
- Installation
- Operations
- Maintenance
- Troubleshooting
- LIMITED WARRANTY (U.S.A.)
- Warranty Information (CANADA)
- Regulatory Notice
- Open Source Announcement
Installation
English32
Installation
STEP 5 Adjust the door height and the door gap
Snap rings
The height of a door can be adjusted using the provided snap
rings, which come in 4 different sizes (1 mm, 1.5 mm, 2 mm,
and 2.5 mm).
To adjust the height of a door
1. Check the height difference between
the doors, and then lift up and hold the
door with the lower height.
9
2. Insert a suitable-sized snap ring (A)
between the door grommet (B) and the
hinge as shown.
CAUTION
• Insert only one snap ring. If you insert two or more snap rings, the rings may slip out
or make a rubbing noise.
• Keep the snap rings out of children’s reach and keep them for future use.
• Do not raise the door too much. The door can contact and damage the top cover.
Untitled-1 32 2019-01-03 11:43:09