User Guide
Contents Chapter 1. Getting Started 3 6 21 24 30 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2. Using Windows 8 33 34 36 38 41 42 What is Microsoft Windows 8? Screen At a Glance Using the Charms Using Apps Windows Hot Key Function Using a Touch Screen (Touch screen models only) Chapter 3.
Chapter 1.
Before You Start Before reading the User Guide, first check the following information. •• Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may differ from the actual appearance of the product.
Before You Start Chapter 1 Getting Started Safety Precaution Notations Icon 4 Copyright Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. © 2012 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may differ from actual products. Chapter 1 Getting Started 6 Do not install the computer on a slant or a place prone to vibrations, or avoid using the computer in that location for a long time. This increases the risk that a malfunction or damage to the product will occur.
Safety Precautions Chapter 1 Getting Started Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the main plug or power cord with wet hands. G If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center.
Safety Precautions Warning Chapter 1 Getting Started 8 AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. When the power supply is ungrounded, the current may leak resulting in electric shock.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1 Getting Started 10 Cutting the power to the internal battery (for corresponding models only.) Never heat the product(or battery) or put the product(or battery) into a fire. Do not put or use the product(or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. •• Thereafter, if you connect the AC adapter, the battery power will be supplied again. •• Do not cut the battery power under normal conditions. •• This may result in data loss or a product malfunction. The location of the Emergency Hole may differ depending on the model.
Safety Precautions Warning Chapter 1 Getting Started 12 Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a fire hazard. The computer may overheat and also present opportunity to thieves. Do not use your computer for long periods of time while any part of your body is making direct contact with it.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Security and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport walk-through devices and security wands.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 14 Battery Usage Related Dispose of worn-out batteries properly. •• There is a danger of fire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Chapter 1 Getting Started 15 Connect only permitted devices to the connectors or ports of the computer. Failure to do so, may cause electric shock and fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 16 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. The device may be damaged or you may be injured. Take care not to throw or drop a computer part or device. Chapter 1 Getting Started Security and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. •• A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk.
Safety Precautions Using the power supply in an airplane Since the power outlet type differs depending on the type of airplane, connect the power appropriately. Since the representative figures of the power plug and the auto adapter are used, they may differ from the actual parts. Chapter 1 Getting Started 19 When using the AC power plug Connect the power plug pins perpendicular into the center of the power outlet.
Safety Precautions Chapter 1 Getting Started When using the auto adapter When the cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Auto Adapter DC Plug Cigar Plug In-flight Cigar Socket When using the Airplane Charging Converter Depending on the airplane, you have to use the auto adapter and charging converter.
Proper Posture During Computer Use Chapter 1 Getting Started 21 Maintaining a proper posture during computer use is very important to prevent physical harm. •• Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. •• Do not use the computer on your lap.
Proper Posture During Computer Use Chapter 1 Getting Started Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. •• Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. •• Avoid setting the monitor and LCD excessively bright. •• Keep the monitor and LCD screen clean. •• If you wear glasses, clean them before using the computer.
Proper Posture During Computer Use Chapter 1 Getting Started 23 Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume first to listen to music. •• Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination •• Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. Check your volume! •• Check if the volume is too loud before using headphones.
Overview Chapter 1 Getting Started Front View •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. •• The items marked as optional may not be provided or may be provided in different locations. 1 Camera (Optional) 2 You can take a picture or make a movie using the Charms > Start > Camera.
Overview Chapter 1 Getting Started Status Indicators 1 HDD/ODD 2 3 Wireless LAN Charge Status 4 Power 1 2 3 4 25 This turns on when the hard disk is or ODD being accessed. This turns on when the wireless LAN is operating. This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. / Red or orange: When the battery is being charged. Off: When the computer is running on battery power without being connected to AC adapter.
Overview Chapter 1 Getting Started 26 Right View ► For 13.3 inch models 1 USB 2.0 Port 1 (Optional) You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Multi Card Slot 2 (Optional) A card slot supports multi cards. Multi Card Slot 1 (Optional) A card slot supports multi cards. USB 2.0 Port 2 (Optional) You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. 2 ► For 14 inch models Plays CD or DVD titles.
Overview Chapter 1 Getting Started Left View ► For 13.3 inch models 27 1 DC Jack A jack to connect the AC adapter that supplies power to the computer. 2 Wired LAN Port Connect the Ethernet cable to this port. USB ports to which you can connect USB devices as well as a chargeable USB port are provided. 1 2 3 4 5 6 USB 3.0 Port Using a chargeable USB port, you can or access or charge a USB device. 3 Chargeable USB 3.
Overview Chapter 1 Getting Started Left View ► For 14 inch models 1 2 3 4 5 6 1 DC Jack A jack to connect the AC adapter that supplies power to the computer. 2 Wired LAN Port Connect the Ethernet cable to this port. USB 3.0 Port or 3 Chargeable USB 3.0 Port (Optional) •• USB device accessing and charging functions are supported. 4 Monitor Port •• The user cannot evaluate the charging status of the USB device from the computer. •• This may not be supported for some USB devices.
Overview Chapter 1 Getting Started 29 Bottom View ► For 13.3 inch models 1 Memory The main memory is installed inside the Compartment Cover cover. This hole is to cut the power supply to the battery. Insert and press one end of an unfolded paper clip into the hole it to cut the power to the battery. 1 2 2 Battery Emergency Hole 3 T he location of the Emergency Battery Hole may differ depending on the model.
Turning the Computer On and Off Chapter 1 Getting Started 30 Turning the computer on 1 2 3 Connect the AC adapter. Lift the LCD panel up. Press the Power button to turn the computer on. About Windows Activation When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the computer.
áᔪ Turning the Computer On and Off Chapter 1 Getting Started 31 Ŗᮁ Turning the computer off •• Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. •• Save all your data before clicking on Shut down. 1 ᯲ The Charms menu appears when you place your mouse pointer at the edge of the top or bottom right of the screen.
Chapter 2.
What is Microsoft Windows 8? Chapter 2 Using Windows 8 Microsoft Windows 8 (hereafter referred to as Windows) is an operating system that is required for operating a computer. 33 Searching for Help To use your computer optimally, you need to know how to use it properly. Therefore, It is better to learn how to use Windows by utilizing Windows Help and Support. •• The screen may appear somewhat different depending on the model and the operating system.
Screen At a Glance Chapter 2 Using Windows 8 Windows 8 provides both the new Start screen mode and the Desktop mode of the existing OS. Start Screen 1 Start Screen Refers to the default Start screen of Windows 8. 2 App Refers to the apps that are currently installed. 3 Desktop Displaying the Charms Start Screen When you turn on the computer, the Start screen is displayed, which allows you to use the applications (Application, App, hereafter referred to as an App) at the same location.
Screen At a Glance Chapter 2 Using Windows 8 Desktop This provides similar functions to those provided by the Desktop in prior Windows versions. 1 2 3 2 4  1 Desktop Refers to the Desktop. The Charms is hidden at the right of the screen. Displaying the Place your mouse pointer at the edge of the 2 Charms top or bottom right of the screen to display the Charms.
Using the Charms Chapter 2 Using Windows 8 The Charms is a new type of menu that combines the Start menu with the Control Panel of existing Windows. The Charms allows you to quickly configure the device(s) connected to your computer, search for App(s)/file(s), and use the sharing function, etc. Activating the Charms Search Search Search Share Share Share If you move your mouse pointer to the top or bottom right corner of the screen, the Charms appears.
Using the Charms Chapter 2 Using Windows 8 37 Changing the Settings Frequently used Windows menus are collected. Click the Charms > Settings. Icon Name Function Description Wireless Network You can connect to a wireless network. Select a wireless network to connect to. Adjusting the Volume You can adjust the volume or mute the sound. Screen Brightness ⦽ ⦽ ENG ⦽ You can adjust the screen brightness. Notice You can set the interval at which an App sends notices.
Using Apps Chapter 2 Using Windows 8 An App refers to an application program (hereafter referred to as an App). In a larger sense, it refers to all the software programs installed on the operating system. Windows 8 provides basic Apps for frequently performed tasks. Starting/Exiting an App Click on an App in the Start screen to activate it. To exit the App 1 2 Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Chapter 2 Using Windows 8 Running Two Apps at the Same Time Adding/Removing an App to/from the Start Screen 1 2 3 4 Click Start screen > right-click your mouse button. Click All Apps at the bottom of the screen to display all the Apps that are currently installed. Select the Apps in the Start screen. Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Using the Windows Store If you run the App Store in the Start screen, the Apps in the Windows Store are displayed. However, a Microsoft account is required to purchase App(s) in the Windows Store. Continue after registering your Microsoft Account in the Charms. Chapter 2 Using Windows 8 40 Configuring your Microsoft Account A Microsoft Account allows you to synchronize your settings with other device(s) running Windows 8 online allowing you to share file(s) or settings.
Windows Hot Key Function You can use the following convenient hot keys in Windows 8. Function Hot Keys Function Description Displaying the Start Screen Windows Key Displaying the Desktop Windows Key + D Switches to Desktop mode. Running the Charms Windows Key + C Activates the Charms. Locking the Screen Windows Key + L Locks the screen. Opening the Ease of Access Center Windows Key + U Opens the Ease of Access Center configuration.
Using a Touch Screen (Touch screen models only) Chapter 2 Using Windows 8 42 A touch screens allows you to use your computer without a keyboard or mouse. The touch screen instructions also describe the functions which can be activated via the touch screen. •• If you are using your computer for a long period of time, it is recommended using a keyboard and mouse. •• Make sure to operate your touch screen using your finger. If you operate your touch screen with a hard object, it will not work.
Using a Touch Screen (Touch screen models only) Touch Operation Dragging from the left edge toward the center Dragging from the bottom edge upward or from the top edge downward Touching slightly (Clicking) Touching twice (Double-clicking) Touching and dragging Chapter 2 Using Windows 8 43 Function Description Displays the last run App. Displays the options for the currently running application. Slightly press with your finger to select an item.
Using a Touch Screen (Touch screen models only) Touch Operation Chapter 2 Using Windows 8 Function Description Rotating with more than 2 fingers Rotates the selected target. Spreading 2 fingers widely or Zooms in or out of the target. bringing them towards each other Touching and holding for a while (Right-clicking your mouse) Touching and dragging 2 fingers up/down, left/right (Scrolling) Provides the same function as right-clicking your mouse button.
Using a Touch Screen (Touch screen models only) Calibrating the Screen If you are using the touch screen for the first time or the pointer is not aiming correctly and the accuracy has declined, calibrate your screen. Chapter 2 Using Windows 8 2 When the Calibration window appears, press the + mark by following the onscreen instructions. 3 The input location of your touch screen is calibrated. The screen calibration process may differ depending on the OS.
Using a Touch Screen (Touch screen models only) Entering Characters 3 Chapter 2 Using Windows 8 On the Desktop, press the at the right of the taskbar to display the Tablet PC Input Panel. You can enter characters using the keyboard and the Tablet PC Input Panel. Entering characters may differ depending on the operating system and is not supported by some operating systems. If you are using your computer for a long period of time, it is recommended using the keyboard.
Using a Touch Screen (Touch screen models only) Chapter 2 Using Windows 8 47 Entering characters using the Touch keyboard Entering characters in Handwriting Mode The Touch keyboard has the standard keyboard layout which allows you to select keys to enter characters. You can enter characters by writing them in the Handwriting Mode Input Panel on the touch screen. 1 Press the Touch keyboard icon Panel. 1 Press the Handwriting Mode icon Panel. 2 Press the keys to enter your characters.
Using a Touch Screen (Touch screen models only) Note for Using the Touch Screen •• When using the touch screen, make sure to keep your hands clean and dry. In humid environments, dry off your hands and the surface of the touch screen before using the touch screen. •• Do not directly spray LCD display cleaner onto the touch screen. The cleaner may soak through the bottom of the touch screen. When using an LCD display cleaner, spray it onto a cloth to clean your touch screen.
Chapter 3.
Keyboard Chapter 3. Using the computer Shortcut key functions and procedures are discussed in the following sections. •• The keyboard image may differ from the actual keyboard. •• The keyboard may differ depending on your country. The following mainly describes the shortcut keys. Shortcut Keys Press both the Fn key and hot key at the same time. Alternatively, press the Fn Lock key as well as a hot key to use the hot key functions more easily.
Keyboard Shortcut Keys Chapter 3. Using the computer Name Settings 51 Function The Samsung software control program, the Settings, is launched. Screen Brightness Control Controls the screen brightness. CRT/LCD Switches the screen output to the LCD or external monitor when an external monitor (or TV) is connected to the computer. Touchpad Turns the Touchpad function on or off. When using an external mouse only, you can turn the Touchpad off.
Keyboard Chapter 3. Using the computer Other Function Keys (Optional) Performs the right-click mouse function (touchpad). + •• If you press the Fn Lock key, you can use the hot key functions without pressing the Fn key. •• If the Fn Lock function is On: You can use the hot key functions without pressing the Fn key. •• If the Fn Lock function is Off: You can use a hot key function by pressing the Fn key + the hot key at the same time.
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Chapter 3. Using the computer 53 Click Function Place a finger on the touchpad and click on an item once. Alternatively, press the left button once quickly and release it. •• Touch the touchpad with your fingers only. Anything other than your fingers, such as a ball-point pen, will not be recognized by the touchpad.
Touchpad Chapter 3. Using the computer Right Button Function 54 The Gesture Function of the Touchpad (Optional) This corresponds to clicking the right mouse button. •• The Touchpad Gesture function may not be provided and the version of the function may differ depending on the model. Some usage procedures may differ depending on the version. áᔪ Press the right touchpad button once. The corresponding pop-up menu appears.
Touchpad Chapter 3. Using the computer 55 The Scroll Function This function is the same as the scroll area of the Touchpad. Charms Menu Activating Function If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right accordingly. If you place your finger on the right edge of the touch pad and drag your finger toward the center, the Charms menu appears.
Touchpad Last Run Window Opening Function Place your finger on the left edge of the touch pad and drag your finger towards the center to activate a previously operating program from among the currently running programs. Chapter 3. Using the computer 56 Touchpad On/Off Function Locking with shortcut keys If you want to use the mouse only without using the touchpad, you can turn the touchpad off. To lock the touchpad function, press the + keys.
CD Drive (ODD, Optional) Chapter 3. Using the computer If your computer does not have a CD drive, you can purchase an external CD drive. 2 When the CD tray opens, insert a CD or DVD and push the tray in until it clicks. 3 Push the CD tray inward until it clicks. •• Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. •• When you clean a CD or DVD title, wipe with a soft cloth from inside to outside.
CD Drive (ODD, Optional) Chapter 3. Using the computer 58 Using External type CD Drive (To be purchased) 1 Connect the CD drive to the USB port. Press the Eject button of the CD drive. Status Indicator Emergency Hole Eject Button USB port 2 When the CD tray opens, insert a CD or DVD and push the tray in until it clicks. 3 Push the CD tray inward until it clicks. The CD drive status indicator is turned on.
Multi Card Slot (Optional) Using the multi card slot, you can read and write data to cards. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc.. Chapter 3. Using the computer Using the card 1 Insert the card into the multi card slot in the indicated direction. ► For 13.
Multi Card Slot (Optional) 2 The following message appears on the top right. Click to open the folder and click View Files. Chapter 3. Using the computer 60 To remove a memory card Take hold of the end of the card and remove the card. To format a memory card When using the memory card for the first time, you must format the card before using it. If a message appears to notify you of any problem, click the corresponding window > Continue without Scanning.
Multi Card Slot (Optional) •• To use a card to exchange data with a digital device such as a digital camera, formatting the data using the digital device is recommended. •• When you try to use a card, which is formatted in the computer, in another digital device, you may have to format the card again in the device. •• You cannot format, write or delete data from a SD, or SDHC card with a write protection tab when it is in the Lock position.
Connecting an External Display Device Chapter 3. Using the computer 62 If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. You can experience a wider screen by connecting the computer to a monitor, TV or projector with a monitor port. The computer provides an analog monitor port (D-SUB) and a digital video/audio port (HDMI).
Connecting an External Display Device ► For 14 inch models Connect the D-SUB port of the computer and the port of the monitor or TV with the monitor cable (15 pin). External Monitor 3 Chapter 3. Using the computer Press the 63 + 3& ִփ key once to display a window to select the monitor mode. Select a mode. 3& ִփ 3& ִփ TV PC Screen only Projector 3& ִփ The contents are only displayed on the PC ࢿـ monitor (current device).
Connecting an External Display Device Chapter 3. Using the computer 64 Connecting through the HDMI port (Optional) By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. After connecting a TV through HDMI, you have to configure the screen and sound. 1 2 Press the + 3& ִփ key once to display a window to select the monitor mode. Select a mode. 3& ִփ 3& ִփ PC Screen only Connect the HDMI cable to the HDMI port of the TV.
Connecting an External Display Device Using AMD Graphics Effectively (optional) PowerXpress is Switchable Graphics technology that selectively enables either the internal or external graphics chipset depending on the program to extend the battery life time while maintaining the graphics performance. Chapter 3. Using the computer 1 Right-click on the Desktop and select Configure Switchable Graphics from the popup menu. 2 Click the Browse button and register the software and click the Apply button.
Connecting an External Display Device Using NVIDIA graphics more efficiently (optional) NVIDIA Optimus is a function that enables automatic selection and usage of the internal or external graphics chipsets depending on the currently running software.
Adjusting the Volume Chapter 3. Using the computer You can adjust the volume using the keyboard and the volume control program. Adjusting the Volume using the Keyboard + Alternatively, press the or áᔪ + Ŗᮁ The procedures to record sound using the Windows Recorder are described below. 1 Connect a microphone to the microphone jack. key combination to 2 Right-click over the Volume icon Recording Device. 3 Check if the microphone is set as the default recording áᔪ device.
Adjusting the Volume Using SoundAlive (Optional) The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. áᔪ •• SoundAlive is only supported in Windows 8. •• The software programs provider may vary, depending on your computer model. Ŗᮁ •• In addition, some pictures may differ from actual product depending on the computer model and software version. 1 ᯲ Right-click over the Volume and click Play Device.
LCD Brightness Control Chapter 3. Using the computer 69 áᔪ The screen brightness is automatically set to the brightest Ŗᮁ level when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time. ᯲ Controlling the Brightness Usingᰆ⊹the Keyboard 1 2 Click the Charms menu > Settings Adjustment icon . > Screen ᖅᱶ Adjust the brightness with the screen brightness control bar.
᯲ Wired Network Chapter 3. Using the computer ᰆ⊹ A wired network is a network environment used for a company network or broadband internet connection at home. 2 •• Since these descriptions are written on the basis of the latest operating system, Windows 8, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions.
Wired Network 4 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. Chapter 3. Using the computer 5 •• The Network Component name may differ depending on the Operating System Installed. •• To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. 71 Configure the IP settings. When using DHCP, select Obtain an IP address automatically.
Wired Network áᔪ Chapter 3. Using the computer 72 Ŗᮁ Using the WOL (Wake On LAN) function ᯲ is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). - feature may not work while using Hybrid power saving feature. Hybrid sleep mode can be disabled from Power Options under Control Panel.
Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Chapter 3. Using the computer 73 •• The screen figures and terms may differ depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided.
Wireless Network (Optional) áᔪ Chapter 3. Using the computer 74 Ŗᮁ Connecting to a Wireless LAN ᯲ 2 If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. Click Connect. If a network key is set for the AP, enter the network key and then click OK. ᰆ⊹ 1 For the network key, please ask your network administrator. If you click the Charms menu > Settings > Network ᖅᱶ Connections , a list of available APs appears.
Using the TPM Security Device (Optional) A TPM (Trusted Platform Module) security device is a security solution that protects your personal information by saving the user authentication data on the TPM chip installed on the computer. To use the TPM security device, you have to initialize the TPM chip in the BIOS Setup, initialize the TPM program, and then register the user. •• This function is only supported for models with TPM (security chip).
Using the TPM Security Device (Optional) Initializing the TPM chip 2 When you use the TPM function for the first time or you want to register the user again, you have to initialize the TPM chip. 1 Restart the computer. 76 If the BIOS screen appears, select the Security > TPM Configuration item and press Enter. SysInfo •• Initializing the TPM chip erases all authentication information saved on the TPM chip. Any decision to initialize must be taken carefully.
Using the TPM Security Device (Optional) 5 When the system reboots, press the corresponding key(s) by following the onscreen instructions. 6 When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly. 7 Select the Security > TPM Configuration > Change TPM Status item and set the item to Enable and Activate.
Using the TPM Security Device (Optional) Registering the TPM program 1 From the Start Screen, right-click any area and select in the bottom right corner. Then, click All apps Infineon Security Platform Solution > Security Platform Management > User Settings. (with administrator authority) icon on the Taskbar and Alternatively, double-click the run initialization with administrator authority. 2 The security authentication settings begin with the Initialization Wizard.
Using the TPM Security Device (Optional) Using the TPM program 2 Chapter 3. Using the computer 79 If the Confirm Attribute Changes window appears, select the range to apply the encryption to and click OK. (This dialog box only appears when the folder is encrypted.) For more information about using the TPM program, refer to the online help for the program. Encrypting a file (folder) This function enables encrypting files and folders.
Using the TPM Security Device (Optional) 4 You will be able to confirm that the color of the folder (file) name in the encrypted folder has been changed to green. Chapter 3. Using the computer 80 Decrypting an encrypted folder (file) 1 2 3 Right-click over an encrypted folder (file) and select Decrypt from the pop-up window. If the user authentication window appears, enter the basic user password you entered when registering the user and click OK. The folder (file) is decrypted.
Using the TPM Security Device (Optional) Chapter 3. Using the computer When the virtual drive (PSD) does not appear When the virtual drive (PSD) is not loaded You can only use the virtual drive (PSD) when you have selected the Personal Secure Drive (PSD) option during the program registration. To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below.
Using the TPM Security Device (Optional) When you have to register again (to erase the authentication information on the TPM chip) To register a user again, you need to delete the existing authentication information saved on the TPM chip and then clear the TPM chip. If a virtual drive has been created, you have to delete the virtual drive before deleting the existing authentication information saved on the TPM chip. Register the user in the following order.
Using the TPM Security Device (Optional) Deleting the existing authentication information saved on the TPM chip. 1 On the desktop, select the Charms menu > Settings > Control Panel > Programs > Uninstall a program > Infineon TPM Professional Package. Then click Uninstall. 2 If the message window appears, click Yes to remove the program. 3 If the Infineon Security Platform message appears, click No. 4 Click the Windows Explorer Desktop.
Using the Multimedia App (Optional) You can enjoy photo, video and music files with the S Camera, S Gallery and S Player apps. S Camera You can take photos and record videos with the S Camera app, and view them directly in this app. S Gallery Only photos or videos recorded with the S Camera app can be viewed with the S Camera app. S Player You can view the photo, video and music files saved on the computer.
Using the Multimedia App (Optional) Chapter 3. Using the computer 85 áᔪ 2 Using the S Camera app Ŗᮁ 1 Tap Charm menu > Start To make a video recording, slide the camera mode bar to the Video position. > S Camera. ᯲ Camera mode (Photo To take a picture, slide the camera mode bar into the Photo position. , Video ) ᰆ⊹ 3 4 ᖅᱶ Tap on Take a picture/Record a video to take a picture or record a video. You can view the picture or video using the Picture preview or S Gallery app.
Using the Multimedia App (Optional) Chapter 3. Using the computer áᔪ Editing a photo Using the S Gallery app Ŗᮁ 1 2 Tap Charm menu > Start > S Gallery. ᯲ You can view the pictures and videos taken by the S Camera. ᰆ⊹ In addition, you can apply special effects to the pictures using the photo editing function. ᖅᱶ You can take a picture in the S Gallery app by tapping the Camera icon. 1 Select Picture preview. Drag it upward slightly from the bottom center.
Using the Multimedia App (Optional) Chapter 3. Using the computer áᔪ 2 Select an effect to be applied to the photo. Using the S Player app Ŗᮁ E.g. If you select Draw Line preview Color Undo 1 Tap Charm menu > Start > S Player. ᯲ My Music ᰆ⊹ My Videos My Photos ᖅᱶ Erase/Draw Line thickness Save Close Frame Draw Stamp Music playlist 2 Slideshow My photo list Select a menu to enjoy photo, video and music files. Some files may not be played depending on their format.
Sharing content using the AllShare Play app (Optional) AllShare Play is a content sharing service that enables users to share and view photos, and play videos and music files saved on digital devices via the Internet. You can use the web storage service and share data by registering the network-connected devices. If your home appliance supports DLNA (Digital Living Network Alliance), you can also connect it through the home network system. Chapter 3.
Sharing content using the AllShare Play app (Optional) You can learn about data sharing as well as view various tips through the lecture videos and FAQs provided on the AllShare Play website (www.allshareplay.com). Chapter 3. Using the computer 89 AllShare Play is especially useful if you want to z View and play the content saved on your in-house PC with another PC or mobile device outside. x Resume editing presentation documents you created at the office.
Sharing content using the AllShare Play app (Optional) AllShare Play at a Glance bn c Nearby devices v Change player You can search for playing devices, such as a TV, using the Change player link. b FAQ Frequently asked questions and answers are provided. n Settings Provides additional settings for registering devices and services. v c z Registered storage This is an online storage space where you can store and view files.
Sharing content using the AllShare Play app (Optional) To use the AllShare Play app properly, you need to configure it as follows: Chapter 3. Using the computer 2 Select a language at the bottom right of the screen. 3 Click on Sign in at the top right and sign-in to the service with your samsung.com account. 91 1. Sign up on the AllShare Play website. 2. Configure PC. 3.
Sharing content using the AllShare Play app (Optional) 4 If you are connecting to the website for the first time, the software installation screen appears. To use the AllShare Play service, install the PC software. 5 Register the current PC with the AllShare Play website according to the instructions on the screen. •• Since up to 6 PCs can be registered, if 6 PCs have already been registered, you have to deregister one of the registered PCs in order to register a new one.
Sharing content using the AllShare Play app (Optional) Configure PC Setting the device status To remotely access the files saved on a device registered with AllShare Play, 1 Disable power-saving mode. The PC must be turned on and should not enter the powersaving mode to use the service: click Settings at the top right of the screen and select the Disable the standby mode of the PC option. 2 Chapter 3. Using the computer 93 Need to Keep AllShare Play in signed-in status.
Sharing content using the AllShare Play app (Optional) Use AllShare Play (Play / Transfer / Upload Files) Playing videos or viewing photos on a TV 1 2 Chapter 3. Using the computer 94 Select the checkbox of the video or photo to be displayed. Click Change player at the top of the screen to search for a device. With AllShare Play, you can play a file saved on a registered device, nearby device, or Storage on TV.
Sharing content using the AllShare Play app (Optional) Chapter 3. Using the computer Playing a file Transferring a file In AllShare Play, you can play a file saved on a registered device, nearby device, or Storage. 1 If you select a registered device or nearby device, the files saved on the device are displayed on the screen. 2 Select a file (or files), and select a destination from the Transfer menu. 1 2 Select the checkbox of the video or photo that you want to play.
Sharing content using the AllShare Play app (Optional) Uploading a file to a SNS 1 2 Chapter 3. Using the computer 3 Sign in to the SNS. 4 Follow the onscreen instructions to upload the file. 96 Select the checkbox of the file that you want to upload. Click Share at the top of the screen and select a SNS (social networking site) website (Facebook, Twitter, Flickr, Picasa, etc.). Depending on the country, supported SNS services can vary.
Samsung Software Update SW Update is a software program that searches for Samsung software programs and drivers installed when you purchased the computer and helps you update any drivers or programs. •• You can check updatable files before performing the update only when you are connected to the internet. •• SW Update does not provide any updates for device drivers or software programs installed separately by the user.
Diagnosing the Computer Status and Troubleshooting The Support Center program, which is Samsung’s computer’s troubleshooting guide, supports diagnosing the system and has a FAQ for frequently occurring problem(s). Support Center may not be provided or may be a different version depending on the model. 1 2 From the Start Screen, right-click any area and select All in the bottom right corner. Then, click Support Apps Center. Support Center is activated and starts diagnosing your computer.
Using the Security Slot (Optional) You can secure the computer by connecting a lock and cable to the Security Slot. To use this feature, you have to purchase the lock and cable additionally. To use the lock and cable, refer to the product manual. Tie the lock and cable to a fixed object and install the other end of the cable to the security slot. 13” models do not have a Security Slot. Only 14” models have a Security Slot. Chapter 3.
Chapter 4.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. •• Use the BIOS setup to define a boot password, change the booting priority, or add a new device. •• Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. •• The functions of the BIOS setup are subject to change for product function enhancement purposes. •• The BIOS Setup menus and items may differ depending on your computer model.
BIOS Setup Chapter 4. Settings and Upgrade 102 System Setup Keys The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. Setup Menu Help Help for the selected item appears automatically. Setup Items Setup Menu Description SysInfo This is a description about the basic specifications of the computer. Advanced Using this menu, you can configure the major chipsets and additional functions. Security Used to configure security functions, including passwords.
Setting a Boot Password Chapter 4. Settings and Upgrade 103 If you set a password, you have to enter the password when you turn the computer on or enter the BIOS Setup. 1 Select the Security menu in the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. 2 In the Set Supervisor Password item, press . 3 Enter a password, press , re-enter the password for confirmation, and press again.
Setting a Boot Password Setting a User Password Using the User Password, you can turn the computer on but you cannot change the major settings of the BIOS Setup because you cannot enter the BIOS Setup. This helps prevent unauthorized access to the major settings in the BIOS Setup menu. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
Setting a Boot Password Deactivating the Password 1 Press on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press . 2 In the Enter Current Password item, enter the currently configured password and press . 3 Leave the Enter New Password item field empty, and press . 4 Leave the Confirm New Password field empty, and press . The password is deactivated.
Changing the Boot Priority As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. Chapter 4. Settings and Upgrade 3 106 Press the down key (↓) to move to the SATA HDD item and press the F6 key to move up to the top item. Boot Menu The screen images and terms may differ from actual product depending on the computer model and driver version. [Boot Priority Order] 1. SATA CD : XXXXXXXXXXXX 2.
Upgrading Memory One or more memory modules are installed on the computer. Users can replace the memory modules or add new memory modules using 1 of the slots. •• Replace or install a new memory module only after shutting the computer down completely and separating the AC adapter from the computer. •• It is recommended that you add a memory module with the same specification (the same manufacturer and the same capacity).
Upgrading Memory 3 Chapter 4. Settings and Upgrade Remove the screw on the memory compartment cover at the bottom of the computer using a screw driver. ► For 13.3 inch models 4 108 Insert a new memory module into the memory slot at an angle of approximately 30 degrees aligning it to the angle of the memory slot. ► For 13.
Upgrading Memory 5 Chapter 4. Settings and Upgrade Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward. ► For 13.3 inch models 7 109 Connect the AC adapter and press the power button to turn the computer on. If you do not connect the AC adapter, the computer will not be turned on even if you press the power button. Removing a memory module Pull the memory module latches outward.
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer is equipped with an internal battery. Precautions •• Users cannot remove or replace the internal battery. •• To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service. •• Use only chargers specified in the User Manual.
áᔪ Battery Chapter 4. Settings and Upgrade 111 Ŗᮁ Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge. Extending the Battery Usage Time ᯲ Decreasing the LCD Brightness ᰆ⊹ 1 2 Click the Charms menu > Settings Adjustment icon .
Battery áᔪ Using the power management program Ŗᮁ This program helps you use the battery more efficiently and supports the power mode optimized for the operating ᯲ environment. Chapter 4. Settings and Upgrade Extending the Battery Life (Optional) In the Settings program, click Power Management and set the Battery Life Extender to ON or OFF. OFF This mode maintains 100% of the battery charge when using the computer on AC power.
Battery Using the Battery Calibration Function When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. Chapter 4. Settings and Upgrade 3 In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again.
Chapter 5.
Recovering/Backing up the Computer (Optional) If a problem occurs with your computer, Recovery (recovery program) allows you to easily restore your computer to the default (factory) settings. Alternatively, you can back up your computer so that you can restore it to your preferred state at any time. Recovery Introduction Back Up Recover Function Chapter 5. Troubleshooting Description Back Up You can back up your entire Windows drive. Recover Restores the entire Windows drive.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 116 Recovering You can recover your computer to the default (factory) status when your computer does not boot up. 1 Factory Default Point Restores your computer to the factory default status. - If Windows does not start T urn your computer on and press the F4 key. Run recovery mode. User's Backup Point - If Windows is run F rom the Start Screen, right-click any area and select All in the bottom right corner.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 117 Recovering after a Backup You can recover your computer after you have backed up your computer to a separate drive or external storage device. Backing up 1 2 Select the drive to save to. To back up your computer to an external storage device, connect the external storage device and select the relevant drive. Click Backup in the Recovery Home screen. Select the drive to save and click Backup. You cannot select a DVD drive.
Recovering/Backing up the Computer (Optional) Recovering You can recover your computer using the backup from the above process. 1 If the backup image is saved to an external storage device, connect the device. 2 Start Recovery and click Recover. 3 Select a Recover Option and click Recover. Select a point to recover. 4 Chapter 5. Troubleshooting 118 The recover is performed based on the screen instructions. You can use your computer after the recover is completed.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 119 To copy the external storage disk When you replace a storage device such as the HDD, SSD, etc. (hereafter referred to as a hard disk) built into your computer, you can move your existing data to the new storage device easily and safely. The new storage device must have sufficient capacity to save your existing data. You need to purchase an external hard USB connector separately to connect the hard disk and your computer.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 120 Export Disk Image Function If you frequently recover your computer to the default (factory) settings, you can conveniently recover your computer after exporting the default (factory) status disk image to an external storage device. 1 2 3 Connect the external storage device, and then select a drive to save to. Click Run.
Recovering/Backing up the Computer (Optional) Computer Recovery Function in Windows 8 1 Click the Charms menu > Settings > Change PC Settings > General. 2 Click the Start button for PC Recovery or Remove All Items and Reinstall Windows. PC Recovery If your PC does not work properly, you can restore your PC while keeping your media files such as your photo, video and music files, etc. as well as your personal documents.
Reinstalling Windows (Optional) You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows when Windows is no longer working properly. (For models supplied with a SYSTEM RECOVERY MEDIA.) For models supplied with the Samsung Recovery Solution, you can reinstall Windows using the Samsung Recovery Solution. These descriptions are for Windows 7/8 and Windows Vista and for supported models only. Chapter 5.
Reinstalling Windows (Optional) 4 The following window appears, select an installation option. Chapter 5. Troubleshooting 5 If you click Custom, the procedures from Step 5 continue sequentially. If you click Upgrade, the procedures from Step 6 continue sequentially. •• Upgrade Select this option to Upgrade Windows while maintaining current files, configurations and programs.
Reinstalling Windows (Optional) Chapter 5. Troubleshooting Reinstalling when Windows does not start When Windows does not start, boot up with the SYSTEM RECOVERY MEDIA and from there you can reinstall Windows. 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive and restart the computer. 2 If the Press any key to boot from CD or DVD... message appears while booting, press any key on the keyboard. 3 4 For Windows 7/8, this screen may not appear depending on the version.
Q&A You can look for potential problems that may occur with the system and view the relevant solutions. Also, you may look up any reference(s) required while operating the computer. Recovery Related Q1 A What is a Recovery Area? Samsung computers have an additional partition to recover computers or save backup files. (Only for models with the Recovery.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs. Chapter 5.
Q&A Q3 A Q4 A What is a recovery image? This refers to the computer status (including operating system, specific driver(s), software(s), etc.) which is converted to a data image. It is required to recover your computer and is embedded in the computer's hard disk. However, this is not provided for storage devices where the capacity is less than 64 GB due to the small capacity.
Q&A Q4 A Since I'm familiar with Windows 7, I would like the Desktop screen to appear as it does in Windows 7. Currently, there is no way to set the Desktop to appear by default. Chapter 5. Troubleshooting Q7 A Press the Windows key + D key simultaneously to reveal the Desktop when the Start screen appears. This is currently the only workaround. Q5 A Refer to your printer manual for detailed instructions for each model.
Q&A Q9 A I want to remove the pre-installed Windows 8 operating system and install a different OS. If you want to install a different operating system on your PC, you need to change the BIOS settings first. For more information, visit http://www.samsung.com and go to Customer Support > Troubleshooting. Search for Windows 8 and look through the list of search results for the relevant issue. Chapter 5.
Q&A Sound Related Q1 A I cannot hear any sound from the TV after connecting via the HDMI port. 1. Right-click over the taskbar on the Desktop and click Play Device. 2. Change the option to Digital Audio (HDMI), HDMI device, HDMI Output or another option and click Set as Default. Then click OK. Chapter 5. Troubleshooting 129 Others Q1 A You can configure your computer in the same way as existing Windows systems.
Chapter 6.
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system.
Important Safety Information Chapter 6 Appendix 132 Care During Use The Instruction On Safety Operation of NotePC •• Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user guide. •• Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. •• Some products have a replaceable CMOS battery on the system board.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory Compliance Statements • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. • Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network.
Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Chapter 6 Appendix 139 SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Regulatory Compliance Statements FCC Part 68 (If fitted with a modem device.) This equipment complies with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following USOC jacks : RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment.
Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Regulatory Compliance Statements When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands.
Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système. Afin de prévenir des interférences de radio au service autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et éloigné des fenêtres pour fournir une protection maximum.
Regulatory Compliance Statements To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Regulatory Compliance Statements Brazil Chapter 6 Appendix 145 European Directives Este produto esta homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolucao 242/2000, e atende aos requisitos tecnicos aplicados.
Regulatory Compliance Statements European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Regulatory Compliance Statements Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Samsung déclare que l’appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Regulatory Compliance Statements Íslenska [Icelandic] Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Samsung erklærer herved at utstyret Notebook Norsk PC er i samsvar med de grunnleggende krav og [Norwegian] øvrige relevante krav i direktiv 1999/5/EF. Türkiye [Türkçe] Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.
Regulatory Compliance Statements Chapter 6 Appendix The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: France General 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz.
Regulatory Compliance Statements European Telecommunication Information (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/ EC.
WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) Chapter 6 Appendix 151 Correct disposal of batteries in this product Pb (Applicable in countries with separate collection systems) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Samsung Packaging Take-Back Program In partnering with select recyclers, Samsung offers packaging take-back at no cost to you. Simply call the following number for the locations nearest you. CRT Processing, LLC (877) 278-0799 Kathy Severson – Logistics contact Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
TCO Certified (for corresponding models only) Congratulations! Félicitations ! This product is TCO Certified for Usability and the Environment. The product you have just purchased carries the TCO Certified label. This means that your computer is designed, manufactured and tested according to some of the strictest performance and environmental criteria in the world.
Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue.
Product Specifications Registered Trademarks Chapter 6 Appendix ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Samsung is a registered trademark of Samsung Co., Ltd. Intel, Pentium/Dual-Core/Quad-Core are registered trademarks of the Intel Corporation. AMD, Dual-Core/Quad-Core are registered trademarks of the AMD Corporation.
Glossary Chapter 6 Appendix 156 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators.
Glossary Chapter 6 Appendix 157 DVD (Digital Versatile Disk) Icon DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. This refers to a small image that represents a file that users can use.
Glossary Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. Chapter 6 Appendix 158 PCMCIA( Personal Computer Memory Card International Association) card This is an extended card slot specification for mobile computers such as a notebook computer.
Glossary Chapter 6 Appendix 159 Server TCP/IPv4 In general, a server refers to a computer that provides shared resources for network users. This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. Share USB (Universal Serial Bus) This refers to setting a resource of a computer such as a folder or printer so that other users can also use it.
Index Chapter 6 Appendix A AP M 73 B Memory 62 Multi Card Slot 59 110 BIOS Setup 101 O Booting Priority 106 Overview CD Drive Charge Click 24 57 110 53 Double-Click 53 Drag 54 Dual View 62 103 Product Specifications 154 69 SW Update 97 T R Recorder 67 Recovery 115 S 6 Scroll 55 Security Slot 99 Shortcut Key 50 Status Indicators 25 53 U 104 V Volume Control Safety Precautions L 98 User Password Password 103 Support Center Touchpad P D LCD Brightness
