Specifications

29
Specifications
General
LCD Panel
Synchronization
Model Name SyncMaster 152B/152S
Size
Display area
Pixel Pitch
Type
Viewing Angle
15.0 inch diagonal
304.1 (H) x 228.1 (V)
0.297 (H) x 0.297 (V)
a-si TFT active matrix
160/130(L/R/T/B)
30 ~ 61 kHz
56 ~ 75 Hz
1024 x 768@60Hz
1024 x 768@75Hz
Horizontal
Vertical
Display Color
16,294,277 Colors
Resolution
Optimum resolution
Maximum resolution
Input Signal, Terminated
RGB Analog, 0.7 Vpp positive at 75 ohms Separate H/V sync, TTL level positive or negative
Maximum Pixel Clock
80 MHz
Power Supply
90 ~ 264 VAC, 60/50 Hz ± 3Hz
Signal Cable
15pin-to-15pin D-sub cable, detachable
Power Consumption
Max. 35W
Dimensions (WxDxH) / Weight
357.5 X 184.5 X 361.6mm (After installing of Stand) / 2.9kg (With Bagic Stand)
357.5 X 50.7 X 288.5mm (After folding the stand) / 3.1kg (Multimedia Stand)
75mm x 75mm (for use with Specialty(Arm) Mounting hardware.)
Operating
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is
used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or
some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.
For example, the no. of TFT LCD pixels that is contained in this product are 2,359,296.
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non-condensing
Storage
Temperature: -4°F ~113°F (-20°C ~ 45°C) Humidity: 5% ~ 95%, non-condensing
VESA Mounting Interface
Environmental considerations
Dot Acceptable
Plug and Play Capability
Note Design and specifications are subject to change without prior notice.