用戶手冊

EMC

This equipment has been tested and found to comply with the limits for medical devices to

the IEC 601-1-2:1994. These limits are designed to provide reasonable protection against

harmful interference in a typical medical installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to other devices in the vicinity. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to other devices, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

z Reorient or relocate the receiving device.

z Increase the separation between the equipment.

z Connect the equipment into an outlet on a circuit different from that to which the other

device(s) are connected.

z Consult the manufacturer or field service technician for help.

Video In / RS 232 / Video Out

Accessories equipment connected to the analog and digital interfaces must be certified to

the respective IEC standards (i.e. IEC 950 for data processing equipment and IEC 601-1

for medical equipment.) Furthermore all configurations shall comply with the system

standard IEC 601-1-1. Everybody who connects additional equipment to the signal input

part or signal output part configures a medical system, and is therefore, responsible that

the system complies with the requirements of the system standard IEC 601-1-1. If in

doubt, consult the technical services department or your local representative.

Transport and Storage Limitations:

Temperature Range of -40

C to +70

Relative Humidity of 10 -95%, non-condensing

* Bio-accumulative is defined as substances which accumulate within living organisms.

** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.