SyncMaster 153V/173V http://www.samsung-monitor.com http://www.samsungusa.
Contents English Safety Instructions 2 Unpacking Your Monitor 3 Setting up Your Monitor Connecting Your Monitor 4 Self-Test Feature Check Werning Messages 6 Environment 6 Useful Tips 6 Adjusting Your Monitor User Controls 7 Menu Features Brightness 8 Contrast 8 Image Lock Fine 9 Coarse 9 H-Position 10 V-Position 10 Reset Geometry Reset 11 Color Reset 11 Color Temperature 12 Color Control 12 Language 12 Menu Position H-Position 13 V-Position 13 Menu Display Time 14
Safety Instructions 1. Do not use a damaged or loose plug. 2. Do not pull the plug out by the wire nor touch the plug with wet hands. 3. Use only a properly grounded plug and receptacle. 4. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. 5. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. 6. Do not connect too many extension cords or plugs to an outlet. 7.
Unpacking Your Monitor General Monitor and Stand Power Cord Signal Cable Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.
Setting up Your Monitor Connecting Your Monitor Setup-General Rear of Computer New Model Macintosh Rear of Monitor Old Model Macintosh 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the monitor to the Macintosh computer using the D-SUB connection cable. 4.
Setting up Your Monitor Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If the monitor is functioning properly, you will see a box with a border and text inside as shown in the following illustration: The three boxes inside the border are red, green and blue.
Setting up Your Monitor Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable. Environment The location and the position of the monitor may influence the quality and other features of the monitor. 1.
Adjusting Your Monitor User Controls 3 1 2 3 1. Use this button to open the OSD and activate a highlighted menu item. 2. Use These buttons to highlight and adjust items using the On Screen Display. These buttons are also direct access buttons for the brightness feature. 3. Use this button to Exit the active menu or the OSD.
Adjusting Your Monitor Brightness Adjust the Brightness. 1. Push the Menu ( ) button. 2. Push the Menu ( ) button to open the Brightness adjustment screen. 3. Use the + button to increase the brightness or - button to decrease the brightness. Direct Access Feature : When OSD is not on the screen, Push the + or - button to adjust brightness. Contrast Adjust the Contrast. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Contrast screen is displayed. 3.
Adjusting Your Monitor Image Lock Fine Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Image Lock screen is displayed. 3. Push the Menu ( ) button twice to open the Fine adjustment screen. 4. Use the - or + buttons to remove any noise.
Adjusting Your Monitor H-Position Follow these instructions to change the horizontal position of the monitor's entire display. 1. Push the Menu ( ) button. 2. Push the - button or + button until the H-Position screen is displayed. 3. Push the Menu ( ) button to open the H-Position adjustment screen. 4. Use the - and + buttons to change the horizontal position of the monitor's viewing area. V-Position Follow these instructions to change the vetical position of the monitor's entire display. 1.
Adjusting Your Monitor Reset Geometry Reset Geometry parameters are replaced with the factory default values. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Reset screen is displayed. 3. Push the Menu ( ) button twice to open the Geometry Reset adjustment screen. 4. Push the + button to select Yes. If you don't want to reset the monitor, use the - button to select No. Color Reset Color parameters are replaced with the factory default values. 1. Push the Menu ( ) button. 2.
Adjusting Your Monitor Color Temperature Color temperature is a measure of the "warmth" of the image colors. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Color Temperature screen is displayed. 3. Push the Menu ( ) button to open the Color Temperature adjustment screen. 4. Press the - or + button to select User Adjusted, Reddish or Bluish. Color Control Follow these steps to adjust individual R, G, B color control. 1. Push the Menu ( ) button. 2.
Adjusting Your Monitor Menu Position H-Position You can change the horizontal position where the OSD menu appears on your monitor. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Menu Position screen is displayed. 3. Push the Menu ( ) button twice to open the H-Position adjustment screen. 4. Use the - and + buttons to place the menu in the horizontal position you prefer. V-Position You can change the vertical position where the OSD menu appears on your monitor. 1.
Adjusting Your Monitor Menu Display Time The menu will automatically turn off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it turns off. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Menu Display Time screen is displayed. 3. Push the Menu ( selection screen. ) button to open the Menu Display Time 4. Use the - or + buttons to select 5, 10, 20, 50, 200 seconds. 20 seconds is the default value.
Adjusting Your Monitor Auto Adjustment Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. 1. Push the Auto button. To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. OSD Lock/Unlock 1. Push and hold in the Menu ( or more to Lock the OSD. ) button for 5 seconds 2. Push and hold in the Menu ( or more to Unlock the OSD.
PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
Troubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer. Check List Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? Solution Check the power cord connection and supply.
Troubleshooting Check List Symptom Check List Solution Is the screen displaying only one color as if looking at the screen through a cellophane paper? Check the signal cable connection. Make sure the video card is fully inserted in it's slot. Have the screen colors become strange after running a program or due to a crash between applications? Reboot the computer. Has the video card been set properly? Set the video card by referring to the video card manual.
Specifications General Model Name SyncMaster 153V LCD Panel Size 15.0 inch diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TFT active matrix Viewing Angle 140/120(H/V) Synchronization 31 ~ 61 kHz Horizontal 56 ~ 75 Hz Vertical Display Color 16,294,277 Resolution Optimum resolution 1024 x 768@60Hz Maximum resolution 1024 x 768@75Hz Input Signal, Terminated RGB Analog 0.
Specifications General Model Name SyncMaster 173V LCD Panel Size 17.0 inch diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264 (H) x 0.264 (V) Type a-si TFT active matrix Viewing Angle 140/120(H/V) Synchronization 31 ~ 81 kHz Horizontal 56 ~ 75 Hz Vertical Display Color 16,294,277 colors Resolution Optimum resolution 1280 x 1024@60Hz Maximum resolution 1280 x 1024@75Hz Input Signal, Terminated RGB Analog 0.
Display Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) 66.667 30.240 -/- 74.551 57.284 -/- SyncMaster 173V MAC. 640 x 480 35.000 MAC. 832 x 624 49.
MEMO 22
153V-vet(press).
153V-vet(press).qxd 3/5/2003 5:36 PM Page 2 Höôùng Daãn An Toaøn 1. Tröôùc khi keát noái caùc nguoàn phaûi kieåm tra nguoàn ñieän cung caáp coù phuø hôïp vôùi ñieän aùp yeâu caàu. 2. Ñöøng bao giôø ñeå caùc vaät baèng kim loaïi vaøo maøn hình ñang môû. Ñieàu naøy seõ gaây ra ñieän giaät. 3. Ñeå traùnh ñieän giaät, khoâng ñöôïc chaïm tay vaøo phía sau maøn hình. Chæ coù nhöõng ngöôøi am hieåu kyõ thuaät môùi neân môû naép maùy. 4. Khoâng ñöôïc söû duïng caùc daây nguoàn ñaõ bò hö hoûng.
153V-vet(press).
153V-vet(press).qxd 3/5/2003 5:37 PM Page 4 Caøi Ñaët Maøn Hình X Keát Noái Maøn Hình Maët sau maùy tính Kieåu maùy Macintosh môùi Maët sau maøn hình Kieåu maùy Macintosh cuõ 1. Keát noái daây nguoàn maøn hình vaøo loã caém phía sau maùy. Caém daây nguoàn vaøo nguoàn ñieän. 2. Gaén caùp tín hieäu vaøo khe caém 15 chaân, D-sub naèm ôû maët sau cuûa maøn hình. 3. Caém maøn hình vaøo maùy Macintosh baèng caùp D-SUB. 4.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 5 Caøi Ñaët Maøn Hình X Kieåm tra chöùc naêng töï kieåm: Maùy tính cuûa baïn coù chöùc naêng töï kieåm tra, baïn coù theå kieåm tra chöùc naêng naøy baèng caùch: 1. Taét maùy tính vaø maøn hình cuûa baïn. 2. Ruùt daây tín hieäu ra khoûi maùy. 3. Baät nguoàn cho maøn hình.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 6 Caøi Ñaët Maøn Hình Thoâng ñieäp caûnh baùo Neáu tín hieäu vaøo khoâng töông thích, moät thoâng ñieäp seõ xuaát hieän treân maøn hình hoaëc maøn hình seõ ñen maëc duø ñeøn chæ thò vaãn saùng. Thoâng ñieäp chæ ra raèng tín hieäu vöôït qua möùc cho pheùp maøn hình hoaëc baïn neân kieåm tra daây caùp tín hieäu. Moâi tröôøng Vò trí vaø höôùng laép ñaët coù aûnh höôûng ñeán chaát löôïng cuûa maøn hình. 1.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 7 Söû Duïng Maøn Hình X Caùc Phím Ñieàu Chænh 3 1 2 1. Söû duïng môû maøn hình OSD hoaëc kích hoaït caùc muïc ñöôïc choïn. 2. Di chuyeån con troû tôùi muïc choïn vaø chænh giaù trò trong muïc choïn. Duøng phím naøy ñeå truy caäp tröïc tieáp cheá ñoä ñieàu chænh töï ñoäng. 3. Duøng thoaùt khoûi caùc muïc chænh hay maøn hình hieån thò.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 8 Söû Duïng Maøn Hình Ñoä Saùng (Brightness) Duøng hieäu chænh ñoä saùng cuûa maøn hình hieån thò. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím Muïc Luïc ( ) ñeå môû maøn hình ñieàu chænh Brightness (Ñoä saùng). 3. Duøng phím + ñeå taêng ñoä saùng hoaëc phím - ñeå giaûm ñoä saùng. Tính naêng truy caäp tröïc tieáp: Khi OSD khoâng hieån thò treân maøn hình, nhaán phím + hoaëc - ñeå ñieàu chænh ñoä saùng.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 9 Söû Duïng Maøn Hình Khoùa hình aûnh (Image Lock) Tinh chænh (Fine) Chöùc naêng Image Lock duøng ñeå tinh chænh hình aûnh ñeå ñaït chaát löôïng hình toát nhaát baèng caùch loaïi boû caùc tín hieäu nhieãu laøm hình aûnh khoâng oån ñònh vì coù caùc veát môø vaø raêng cöa. Neáu chöa ñaït ñöôïc keát quaû nhö yù baèng chöùc naêng Fine (Tinh chænh), haõy duøng chöùc naêng Coarse (Chænh thoâ), sau ñoù duøng laïi chöùc naêng Fine. 1. AÁn phím Muïc Luïc ( ). 2.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 10 Söû Duïng Maøn Hình Vò trí ngang (H-Position) Haõy thöïc hieän theo nhöõng höôùng daãn naøy ñeå thay ñoåi vò trí ngang cuûa toaøn boä maøn hình hieån thò. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình H-Position (Vò trí ngang) hieån thò. 3. Nhaán phím Muïc Luïc ( H-Position. ) ñeå môû maøn hình ñieàu chænh 4. Duøng phím - hoaëc + ñeå thay ñoåi vò trí ngang cuûa toaøn boä maøn hình hieån thò.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 11 Söû Duïng Maøn Hình Caøi ñaët laïi thoâng (Reset) Caøi ñaët laïi thoâng soá hình hoïc (Geometry Reset) Caùc thoâng soá hình hoïc ñöôïc thay baèng caùc giaù trò maëc ñònh khi saûn xuaát. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Reset (Caøi ñaët laïi thoâng) hieån thò. 3. Nhaán phím Muïc Luïc ( chænh Geometry Reset. ) hai laàn ñeå môûû maøn hình ñieàu 4. Nhaán phím + ñeå choïn Yes.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 12 Söû Duïng Maøn Hình Ñoä noùng maøu (Color Temperature) Nhieät ñoä maøu laø moät chöùc naêng ño ñoä "aám" cuûa maøu saéc hình aûnh. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Color Temperature (Ñoä noùng maøu) hieån thò. 3. Nhaán phím Muïc Luïc ( Color Temperature. ) ñeå môû maøn hình ñieàu chænh 4.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 13 Söû Duïng Maøn Hình Vò trí Muïc luïc (Menu Position) Vò trí ngang (H-Position) Baïn coù theå thay ñoåi vò trí ngang cuûa nôi xuaát hieän muïc luïc OSD treân maøn hình. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình H-Menu Position (Vò trí Muïc luïc) hieån thò. 3. Nhaán phím Muïc Luïc ( chænh H-Position. ) hai laàn ñeå môû maøn hình ñieàu 4. Duøng phím - hoaëc + ñeå ñaët muïc luïc vaøo vò trí ngang maø baïn thích.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 14 Söû Duïng Maøn Hình Thôøi gian hieån thò muïc luïc (Menu Display Time) Muïïc luïc seõ töï ñoäng taét neáu khoâng thöïc hieän ñieàu chænh naøo trong moät khoaûng thôøi gian nhaát ñònh. Baïn coù theå caøi ñaët thôøi gian chôø cuûa muïc luïc tröôùc khi töï ñoäng taét. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Menu Display Time (Thôøi gian hieån thò muïc luïc) hieån thò. 3.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 15 Söû Duïng Maøn Hình Ñieàu chænh töï ñoäng (Auto Adjustment) Chöùc naêng Auto Adjustment cho pheùp maøn hình coù theå töï ñieàu chænh theo tín hieäu video nhaän ñöôïc. Caùc giaù trò Fine, Coarse vaø Position seõ ñöôïc ñieàu chænh töï ñoäng. 1. Nhaán phím Auto. Ñeå cho chöùc naêng ñieàu chænh töï ñoäng chính xaùc hôn, haõy kích hoaït chöùc naêng 'AUTO' trong khi AUTO PATTERN ñang hoaït ñoäng. Ghi chuù: Khoâng coù hieäu löïc.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 16 Tieát Kieäm Naêng Löôïng Maøn hình Vi tính ñöôïc xaây döïng heä thoáng quaûn lyù naêng löôïng goïi laø möùc naêng löôïng thaáp. Cheá ñoä naøy seõ ñöa maùy veà cheá ñoä tieát kieäm naêng löôïng khi maùy khoâng duøng trong moät khoaûng thôøi gian. Khi baïn di chuyeån chuoät hay aán baát kyø phím naøo treân baøn phím, maøn hình seõ hoaït ñoäng laïi bình thöôøng. Baïn neân taét haún khi khoâng söû duïng trong moät thôøi gian daøi hoaëc khi vaéng nhaø.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 17 Giaûi Quyeát Söï Coá Tröôùc khi goïi ñieän ñeán dòch vuï hoã trôï, haõy ñoïc laïi thoâng tin trong phaàn naøy ñeå xem baïn coù theå töï khaéc phuïc ñöôïc söï coá naøo khoâng. Neáu baïn caàn söï trôï giuùp vui loøng lieân laïc vôùi traïm baûo haønh gaàn nhaát. Muïc kieåm tra Hieän Töôïng Khoâng coù hình aûnh. Maøn hình khoâng coù nguoàn.
153V-vet(press).qxd 3/5/2003 5:37 PM Page 18 Giaûi Quyeát Söï Coá Muïc kieåm tra Hieän Töôïng Hình aûnh treân maøn hình bò rung. Muïc Kieåm Tra Kieåm tra caáu hình cuûa maøn hình ñeå xem coù ôû cheá ñoä töông thích ( Cheá ñoä töông thích: Taàn soá doïc : 43Hz, 87Hz(i)...) Höôùng Giaûi Quyeát Tín hieäu cuûa card maøn hình vöôït quaù ñoä phaân giaûi vaø taàn soá queùt lôùn nhaát cuûa maøn hình.
153V-vet(press).
153V-vet(press).
153V-vet(press).qxd 3/5/2003 5:37 PM Page 21 Cheá Ñoä Hieån Thò Neáu tín hieäu ñöôïc truyeàn ñi töø maùy töông öùng vôùi Caùc cheá ñoä caøi ñaët veà thôøi gian sau ñaây, maøn hình seõ ñöôïc ñieàu chænh töï ñoäng. Tuy nhieân, neáu tín hieäu khaùc, maøn hình seõ bò traéng trong khi ñeøn chæ thò vaãn saùng. Chænh card maøn hình theo baûng thoâng soá döôùi ñaây.
153V-vet(press).