91T_cover 2003.2.7 1:52 PM 페이지1 SyncMaster 191T http://www.samsung-monitor.com http://www.samsungusa.
191T-vet(press).
191T-vet(press).qxd 2/7/2003 10:20 AM Page 2 Höôùng Daãn An Toaøn 1. Tröôùc khi keát noái caùc nguoàn phaûi kieåm tra nguoàn ñieän cung caáp coù phuø hôïp vôùi ñieän aùp yeâu caàu. 2. Ñöøng bao giôø ñeå caùc vaät baèng kim loaïi vaøo maøn hình ñang môû. Ñieàu naøy seõ gaây ra ñieän giaät. 3. Ñeå traùnh ñieän giaät, khoâng ñöôïc chaïm tay vaøo phía sau maøn hình. Chæ coù nhöõng ngöôøi am hieåu kyõ thuaät môùi neân môû naép maùy. 4. Khoâng ñöôïc söû duïng caùc daây nguoàn ñaõ bò hö hoûng.
191T-vet(press).
191T-vet(press).qxd 2/7/2003 10:20 AM Page 4 Caøi Ñaët Maøn Hình X Keát Noái Maøn Hình Maët sau maùy tính Maët sau maøn hình Kieåu maùy Macintosh môùi Kieåu maùy Macintosh cuõ 1. Keát noái daây nguoàn maøn hình vaøo loã caém phía sau maùy. Caém daây nguoàn vaøo nguoàn ñieän. 2-1. Gaén caùp tín hieäu vaøo khe caém 15 chaân, D-sub naèm ôû maët sau cuûa maøn hình. 2-2. Keát noái caùp DVI vaøo ngoõ DVI ôû maët sau maøn hình. 3. Caém maøn hình vaøo maùy Macintosh baèng caùp D-SUB. 4.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 5 Caøi Ñaët Maøn Hình X Kieåm tra chöùc naêng töï kieåm: Maùy tính cuûa baïn coù chöùc naêng töï kieåm tra, baïn coù theå kieåm tra chöùc naêng naøy baèng caùch: 1. Taét maùy tính vaø maøn hình cuûa baïn. 2. Ruùt daây tín hieäu ra khoûi maùy. 3. Baät nguoàn cho maøn hình.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 6 Caøi Ñaët Maøn Hình Thoâng ñieäp caûnh baùo Neáu tín hieäu vaøo khoâng töông thích, moät thoâng ñieäp seõ xuaát hieän treân maøn hình hoaëc maøn hình seõ ñen maëc duø ñeøn chæ thò vaãn saùng. Thoâng ñieäp chæ ra raèng tín hieäu vöôït qua möùc cho pheùp maøn hình hoaëc baïn neân kieåm tra daây caùp tín hieäu. Moâi tröôøng Vò trí vaø höôùng laép ñaët coù aûnh höôûng ñeán chaát löôïng cuûa maøn hình. 1.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 7 Söû Duïng Maøn Hình X Caùc Phím Ñieàu Chænh 1 2 3 4 1. Duøng phím naøy ñeå truy caäp tröïc tieáp cheá ñoä ñieàu chænh töï ñoäng. 2. Duøng thoaùt khoûi caùc muïc chænh hay maøn hình hieån thò. 3. Di chuyeån con troû tôùi muïc choïn vaø chænh giaù trò trong muïc choïn. 4. Söû duïng môû maøn hình OSD hoaëc kích hoaït caùc muïc ñöôïc choïn.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 8 Söû Duïng Maøn Hình Ñoä Saùng (Brightness) Duøng hieäu chænh ñoä saùng cuûa maøn hình hieån thò. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím Muïc Luïc ( ) ñeå môû maøn hình ñieàu chænh Brightness (Ñoä saùng). 3. Duøng phím + ñeå taêng ñoä saùng hoaëc phím - ñeå giaûm ñoä saùng. Ñoä Töông Phaûn (Contrast) Duøng hieäu chænh ñoä töông phaûn cuûa maøn hình hieån thò. 1. AÁn phím Muïc Luïc ( ). 2.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 9 Söû Duïng Maøn Hình Khoùa hình aûnh (Image Lock) Tinh chænh (Fine) Chöùc naêng Image Lock duøng ñeå tinh chænh hình aûnh ñeå ñaït chaát löôïng hình toát nhaát baèng caùch loaïi boû caùc tín hieäu nhieãu laøm hình aûnh khoâng oån ñònh vì coù caùc veát môø vaø raêng cöa. Neáu chöa ñaït ñöôïc keát quaû nhö yù baèng chöùc naêng Fine (Tinh chænh), haõy duøng chöùc naêng Coarse (Chænh thoâ), sau ñoù duøng laïi chöùc naêng Fine. 1. AÁn phím Muïc Luïc ( ). 2.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 10 Söû Duïng Maøn Hình Vò trí (Position) Vò trí ngang (H-Position) Haõy thöïc hieän theo nhöõng höôùng daãn naøy ñeå thay ñoåi vò trí ngang cuûa toaøn boä maøn hình hieån thò. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Position (Vò trí) hieån thò. 3. Nhaán phím Muïc Luïc ( H-Position. ) ñeå môû maøn hình ñieàu chænh 4. Duøng phím - hoaëc + ñeå thay ñoåi vò trí ngang cuûa toaøn boä maøn hình hieån thò.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 11 Söû Duïng Maøn Hình Caøi ñaët laïi thoâng (Reset) Caøi ñaët laïi thoâng soá hình hoïc (Geometry Reset) Caùc thoâng soá hình hoïc ñöôïc thay baèng caùc giaù trò maëc ñònh khi saûn xuaát. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Reset (Caøi ñaët laïi thoâng) hieån thò. 3. Nhaán phím Muïc Luïc ( chænh Geometry Reset. ) hai laàn ñeå môûû maøn hình ñieàu 4. Nhaán phím + ñeå choïn Yes.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 12 Söû Duïng Maøn Hình Ñoä noùng maøu (Color Temperature) Ñoä noùng maøu (Color Temperature) Nhieät ñoä maøu laø moät chöùc naêng ño ñoä "aám" cuûa maøu saéc hình aûnh. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Color Temperature (Ñoä noùng maøu) hieån thò. 3. Nhaán phím Muïc Luïc ( Color Temperature. ) ñeå môû maøn hình ñieàu chænh 4.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 13 Söû Duïng Maøn Hình Kích thöôùc hình aûnh (Image Size) Neáu maùy tính hoaëc card maøn hình cuûa baïn cung caáp tæ leä tín hieäu vaø khaû naêng hieån thò thaáp hôn 1280 x 1024, maøn hình LCD naøy coù moät boä xöû lyù tæ leä coù khaû naêng môû roäng vuøng hieån thò leân ñeán 1280 x 1024. 1. AÁn phím Muïc Luïc ( Ngoân Ngöõ (Language) ). 2 Nhaán phím - hoaëc + cho ñeán khi maøn hình Image Size hieån thò. 3 Nhaán phím Muïc Luïc ( naêng Image Size.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 14 Söû Duïng Maøn Hình Vò trí Muïc luïc (Menu Position) Vò trí ngang (H-Position) Baïn coù theå thay ñoåi vò trí ngang cuûa nôi xuaát hieän muïc luïc OSD treân maøn hình. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Menu Position (Vò trí Muïc luïc) hieån thò. 3. Nhaán phím Muïc Luïc ( chænh H-Position. ) hai laàn ñeå môû maøn hình ñieàu 4. Duøng phím - hoaëc + ñeå ñaët muïc luïc vaøo vò trí ngang maø baïn thích.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 15 Söû Duïng Maøn Hình Thôøi gian hieån thò muïc luïc (Menu Display Time) Muïïc luïc seõ töï ñoäng taét neáu khoâng thöïc hieän ñieàu chænh naøo trong moät khoaûng thôøi gian nhaát ñònh. Baïn coù theå caøi ñaët thôøi gian chôø cuûa muïc luïc tröôùc khi töï ñoäng taét. 1. AÁn phím Muïc Luïc ( ). 2. Nhaán phím - hoaëc + cho ñeán khi maøn hình Menu Display Time (Thôøi gian hieån thò muïc luïc) hieån thò. 3.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 16 Söû Duïng Maøn Hình Ñieàu chænh töï ñoäng (Auto Adjustment) Chöùc naêng Auto Adjustment cho pheùp maøn hình coù theå töï ñieàu chænh theo tín hieäu video nhaän ñöôïc. Caùc giaù trò Fine, Coarse vaø Position seõ ñöôïc ñieàu chænh töï ñoäng. 1. Nhaán phím Auto. Ñeå cho chöùc naêng ñieàu chænh töï ñoäng chính xaùc hôn, haõy kích hoaït chöùc naêng 'AUTO' trong khi AUTO PATTERN ñang hoaït ñoäng. Ghi chuù: Khoâng coù hieäu löïc.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 17 Tieát Kieäm Naêng Löôïng Maøn hình Vi tính ñöôïc xaây döïng heä thoáng quaûn lyù naêng löôïng goïi laø möùc naêng löôïng thaáp. Cheá ñoä naøy seõ ñöa maùy veà cheá ñoä tieát kieäm naêng löôïng khi maùy khoâng duøng trong moät khoaûng thôøi gian. Khi baïn di chuyeån chuoät hay aán baát kyø phím naøo treân baøn phím, maøn hình seõ hoaït ñoäng laïi bình thöôøng. Baïn neân taét haún khi khoâng söû duïng trong moät thôøi gian daøi hoaëc khi vaéng nhaø.
1T-vet(press).qxd 2/7/2003 10:20 AM Page 18 Giaûi Quyeát Söï Coá Tröôùc khi goïi ñieän ñeán dòch vuï hoã trôï, haõy ñoïc laïi thoâng tin trong phaàn naøy ñeå xem baïn coù theå töï khaéc phuïc ñöôïc söï coá naøo khoâng. Neáu baïn caàn söï trôï giuùp vui loøng lieân laïc vôùi traïm baûo haønh gaàn nhaát. Muïc kieåm tra Hieän Töôïng Khoâng coù hình aûnh. Maøn hình khoâng coù nguoàn.
191T-vet(press).qxd 2/7/2003 10:20 AM Page 19 Giaûi Quyeát Söï Coá Muïc kieåm tra Hieän Töôïng Hình aûnh treân maøn hình bò rung. Muïc Kieåm Tra Kieåm tra caáu hình cuûa maøn hình ñeå xem coù ôû cheá ñoä töông thích ( Cheá ñoä töông thích: Taàn soá doïc : 43Hz, 87Hz(i)...) Höôùng Giaûi Quyeát Tín hieäu cuûa card maøn hình vöôït quaù ñoä phaân giaûi vaø taàn soá queùt lôùn nhaát cuûa maøn hình.
191T-vet(press).
191T-vet(press).qxd 2/7/2003 10:20 AM Page 21 Cheá Ñoä Hieån Thò Neáu tín hieäu ñöôïc truyeàn ñi töø maùy töông öùng vôùi Caùc cheá ñoä caøi ñaët veà thôøi gian sau ñaây, maøn hình seõ ñöôïc ñieàu chænh töï ñoäng. Tuy nhieân, neáu tín hieäu khaùc, maøn hình seõ bò traéng trong khi ñeøn chæ thò vaãn saùng. Chænh card maøn hình theo baûng thoâng soá döôùi ñaây. Taàn soá queùt ngang (kHz) Taàn soá queùt doïc (Hz) Xung clock (MHz) Sync Polarity (H/V) IBM. 640 x 350 31,469 70,086 25,175 +/- IBM.
191T-vet(press).
191T-en 2003.2.
191T-en 2003.2.7 9:46 AM 페이지2 Safety Instructions 1. Do not use a damaged or loose plug. 2. Do not pull the plug out by the wire nor touch the plug with wet hands. 3. Use only a properly grounded plug and receptacle. 4. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. 5. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. 6.
191T-en 2003.2.
191T-en 2003.2.7 9:46 AM 페이지4 Setting up Your Monitor Connecting Your Monitor Setup-General Rear of Computer Rear of Monitor New Model Macintosh Old Model Macintosh 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Connect the DVI Cable to the DVI Port on the back of your Monitor. 3.
191T-en 2003.2.7 9:46 AM 페이지5 Setting up Your Monitor ▶Self-Test Feature Check Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If the monitor is functioning properly, you will see a box with a border and text inside as shown in the following illustration: The three boxes inside the border are red, green and blue.
191T-en 2003.2.7 9:46 AM 페이지6 Setting up Your Monitor Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable. Environment The location and the position of the monitor may influence the quality and other features of the monitor. 1.
191T-en 2003.2.7 9:46 AM 페이지7 Adjusting Your Monitor ▶User Controls 1 2 3 4 1. Use this button to auto adjustment direct access. 2. Use this button to Exit the active menu or the OSD. 3. These buttons allow you to highlight and adjust items in the menu. 4. Use this button to open the OSD and activate a highlighted menu item.
191T-en 2003.2.7 9:46 AM 페이지8 Adjusting Your Monitor Brightness Adjust the Brightness. 1. Push the Menu ( ) button. 2. Push the Menu ( ) button to open the Brightness adjustment screen. 3. Use the + button to increase the brightness or - button to decrease the brightness. Contrast Adjust the Contrast. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Contrast screen is displayed. 3. Push the Menu ( ) button to open the Contrast adjustment screen. 4.
191T-en 2003.2.7 9:46 AM 페이지9 Adjusting Your Monitor Image Lock Fine Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Image Lock screen is displayed. 3. Push the Menu ( ) button twice to open the Fine adjustment screen. 4.
191T-en 2003.2.7 9:46 AM 페이지10 Adjusting Your Monitor Position H-Position Follow these instructions to change the horizontal position of the monitor's entire display. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Position screen is displayed. 3. Push the Menu ( ) button twice to open the H-Position adjustment screen. 4. Use the - and + buttons to change the horizontal position of the monitor's viewing area. Note: Not Available This function doesn't work in Digital input.
191T-en 2003.2.7 9:46 AM 페이지11 Adjusting Your Monitor Reset Geometry Reset Geometry parameters are replaced with the factory default values. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Reset screen is displayed. 3. Push the Menu ( ) button twice to open the Geometry Reset adjustment screen. 4. Push the + button to select Yes. If you don't want to reset the monitor, use the - button to select No. Note: Not Available This function doesn't work in Digital input.
191T-en 2003.2.7 9:46 AM 페이지12 Adjusting Your Monitor Color Temperature Color Temperature Color temperature is a measure of the "warmth" of the image colors. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Color Temperature screen is displayed. 3. Push the Menu ( ) button to open the Color Temperature adjustment screen. 4. Press the - or + button to select User Adjusted, Reddish or Bluish. Note: Not Available This function doesn't work in Digital input.
191T-en 2003.2.7 9:46 AM 페이지13 Image Size If your computer or video board supplies a signal rate and addressability lower than 1280 x 1024, this LCD Monitor provides a scaling processor that can expand the addressability up to 1280 x 1024. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Image Size screen is displayed. 3. Push the Menu ( ) button to open the Image Size adjustment screen. 4. Use the - button or + button to select Normal, Expanded 1 or Expanded 2.
191T-en 2003.2.7 9:46 AM 페이지14 Adjusting Your Monitor Menu Position H-Position You can change the horizontal position where the OSD menu appears on your monitor. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Menu Position screen is displayed. 3. Push the Menu ( ) button twice to open the H-Position adjustment screen. 4. Use the - and + buttons to place the menu in the horizontal position you prefer.
191T-en 2003.2.7 9:46 AM 페이지15 Adjusting Your Monitor Menu Display Time The menu will automatically turn off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it turns off. 1. Push the Menu ( ) button. 2. Push the - button or + button until the Menu Display Time screen is displayed. 3. Push the Menu ( selection screen. ) button to open the Menu Display Time 4. Use the - or + buttons to select 5, 10, 20, 50, 200 seconds.
191T-en 2003.2.7 9:46 AM 페이지16 Adjusting Your Monitor Auto Adjustment Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. 1. Push the Auto button. To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on. Note: Not Available This function doesn't work in Digital input. OSD Lock/Unlock 1. Push and hold in the Menu ( or more to Lock the OSD.
191T-en 2003.2.7 9:46 AM 페이지17 PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
191T-en 2003.2.7 9:46 AM 페이지18 Troubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the Information section or contact your dealer. Check List Symptom No images on the screen. I cannot turn on the monitor. Chek List Is the power cord connected properly? Solution Check the power cord connection and supply.
191T-en 2003.2.7 9:46 AM 페이지19 Troubleshooting Check List Symptom Chek List Solution Is the screen displaying only one color as if looking at the screen through a cellophane paper? Check the signal cable connection. Make sure the video card is fully inserted in it's slot. Have the screen colors become strange after running a program or due to a crash between applications? Reboot the computer. Has the video card been set properly? Set the video card by referring to the video card manual.
191T-en 2003.2.7 9:46 AM 페이지20 Specifications General Model Name SyncMaster 191T LCD Panel Size 19.0 inch diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.298 (H) x 0.294 (V) Type a-si TFT active matrix Viewing Angle 85/85/85/85(L/R/T/B) Synchronization 30 ~ 81 kHz Horizontal 56 ~ 85 Hz Vertical Display Color 16,294,277 Resolution Optimum resolution 1280 x 1024@60Hz Maximum resolution 1280 x 1024@75Hz Input Signal, Terminated RGB Analog 0.
191T-en 2003.2.7 9:46 AM 페이지21 Display Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.
191T-en 2003.2.