USER MANUAL ENG This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Copyright information • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac and Apple App Store are registered trademarks of the Apple Corporation. • Google Play Store is a registered trademark of Google, Inc. • Adobe, the Adobe logo, Photoshop and Lightroom are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera. Do not use your camera near flammable or explosive gases and liquids. Prevent damage to subjects’ eyesight.
Health and safety information If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or AC adapter, and then contact a Samsung service center. Comply with any regulations that restrict the use of a camera in a certain area. • Avoid interference with other electronic devices. Caution—situations that could cause damage to your camera or other equipment Remove the batteries from your camera when storing it for an extended period of time.
Health and safety information Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. When you use the AC adapter, turn off the camera before you disconnect the power to the AC adapter. Failing to do so may result in fire or electric shock. Disconnect the AC adapter from the wall socket when not in use. Failing to do so may result in fire or electric shock. Exercise caution when you connect cables and install batteries and memory cards.
Health and safety information Check that the camera is operating properly before use. Avoid interference with other electronic devices. The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. Your camera emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles.
Icons used in this manual Icon Function Additional information Safety warnings and precautions [ ] Camera buttons. For example, [Shutter] represents the shutter button. ( Page number of related information ) → * The order of options or menus you must select to perform a step; for example: Touch 1 → Quality (represents touch 1, and then touch Quality).
Contents Tips Chapter 1 Concepts in Photography My Camera Shooting postures....................................................................................... 13 Getting started ............................................................................................ 28 Unpacking.................................................................................................................... 28 Camera layout ......................................................................................
Contents Display icons ................................................................................................ 41 In Shooting mode ..................................................................................................... 41 Capturing photos ........................................................................................................ 41 Recording videos .........................................................................................................
Contents Chapter 2 Framing mode ............................................................................................. 92 Shooting Functions Optical Image Stabilization (OIS) ............................................................. 93 Size and Resolution .................................................................................... 74 Photo size ..................................................................................................................... 74 Quality ............
Contents Chapter 3 Chapter 4 Playback/Editing Wireless network Searching and managing files ................................................................ 110 Viewing photos ....................................................................................................... 110 Viewing image thumbnails................................................................................. 110 Viewing files by category ....................................................................................
Contents Chapter 5 Chapter 6 Camera settings menu Connecting to external devices User settings............................................................................................... 146 ISO Customizing ..................................................................................................... 146 Viewing files on an HDTV or 3D TV ........................................................ 158 Viewing files on an HDTV ......................................................................
Contents Chapter 7 Before contacting a service center ........................................................ 181 Appendix Camera specifications .............................................................................. 184 Error messages .......................................................................................... 169 Glossary....................................................................................................... 189 Maintaining the camera............................
Concepts in Photography Shooting postures A correct posture for stabilizing the camera is necessary for taking a good photo. Even if you hold a camera correctly, the wrong posture can cause the camera to shake. Stand up straight and remain still to maintain a steady base for your camera. When shooting with a slow shutter speed, hold your breath to minimize body movement. Holding the camera Hold the camera with your right hand and place you right index finger on the shutter button.
Concepts in Photography Standing photography Compose your shot; stand up straight with your feet shoulder-length apart, and keep your elbows pointed down. Crouching photography Compose your shot, crouch with one knee touching the ground, and keep a straight posture.
Concepts in Photography Aperture The aperture, a hole that controls the amount of light that enters the camera, is one of the three factors that determine the exposure. The aperture housing contains thin, metal plates that open and close to let light through the aperture and into the camera. The size of the aperture is closely related to the brightness of a photo: the larger the aperture, the brighter the photo; the smaller the aperture, the darker the photo.
Concepts in Photography Aperture value and the depth of field You can blur or sharpen the background of a photo by controlling the aperture. It is closely related to the depth of field (DOF), which can be expressed as small or large. The aperture housing contains several blades. These blades move together and control the amount of light passing through the center of the aperture. The number of blades also affects the shape of light when shooting night scenes.
Concepts in Photography Therefore, the faster the shutter speed, the less light will be let in. Likewise, the slower the shutter speed, the more light will be let in. Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor.
Concepts in Photography ISO sensitivity The exposure of an image is determined by the sensitivity of the camera. This sensitivity is based on international film standards, known as ISO standards. On digital cameras, this sensitivity rating is used to represent the sensitivity of the digital mechanism that captures the image. ISO sensitivity doubles as the number doubles. For example, an ISO 200 setting is capable of capturing images at twice the speed of an ISO 100 setting.
Concepts in Photography How the aperture setting, shutter speed, and ISO sensitivity control exposure The aperture setting, shutter speed, and ISO sensitivity are closely interconnected in photography. The aperture setting controls the opening that regulates the light that enters the camera, while the shutter speed determines the length of time that light is allowed to enter. ISO sensitivity determines the speed at which the film reacts to light.
Concepts in Photography Correlation between focal length, angle, and perspective Long focal length Focal length, which is measured in millimeters, is the distance between the middle of the lens to its focal point. It affects the angle and perspective of captured images. A short focal length translates into a wide angle, which allows you to capture a wide shot. A long focal length translates into a narrow angle, which allows you to capture telephoto shots.
Concepts in Photography What controls out-of-focus effects? Depth of field Portraits or still-life photos mostly acclaimed by people are the ones on which the background is out of focus so the subject looks pronounced. Depending on the focused areas, a photo can be blurred or sharpened. This is called ‘a low DOF’ or ‘a high DOF’. The depth of field is the focused area around the subject. Therefore, a small DOF signifies that the focused area is narrow and a large DOF means the focused area is wide.
Concepts in Photography DOF depends on focal length The longer the focal length is, the lower the DOF gets. A telescope lens with a longer focal length than a telescope lens with a short focal length is better to capture a photo of a low DOF. DOF depends on the distance between the subject and the camera The shorter the distance between the subject and the camera is, the lower the DOF gets. Therefore, taking a photo close to a subject can result in a photo of low DOF.
Concepts in Photography Optical preview You can touch the Custom button on the screen to view the optical preview before capturing a photo. The camera adjusts the aperture to the predefined settings and shows the results on the screen. Set the Custom button to Optical Preview. (p. 150) Composition It is fun to capture a photo of the beauty of world with a camera. No matter how the world is beautiful, however, a poor composition cannot capture the beauty of it.
Concepts in Photography Using the rule of thirds will create photos with stable and compelling compositions. Below are a few examples. Photos with two subjects If your subject is in one corner of the photo, it creates an unbalanced composition. You can stabilize the photo by capturing a second subject in the opposite corner to balance the weight of the photo. Subject 2 Subject 1 Unstable Subject 2 Subject 1 Stable When taking landscape photos, centering the horizon will create an unbalanced effect.
Concepts in Photography Flash guide number Flash Light is one of the most important components in photography. It’s not easy, however, to have an enough amount of light anytime and anywhere. Making use of a flash allows you to optimize light settings and create a variety of effects. Flash, also known as strobe or speed light, helps to create adequate exposure in low-light conditions. It is also useful in light-abundant situations.
Concepts in Photography Bounce Photography Bounce photography refers to the method of bouncing light off of the ceiling or walls so that the light spreads evenly over the subject. Normally, photos captured with flash may appear unnatural and cast shadows. Subjects in photos captured with bounce photography cast no shadows and look smooth due to evenly spread light.
Chapter 1 My Camera Learn about your camera’s layout, display icons, lens, optional accessories, and basic functions.
My Camera Getting started Unpacking Check your product box for the following items. Camera (including the body cap and hot-shoe cover) AC adapter/USB cable Rechargeable battery External flash Software CD-ROM (User manual included) Adobe Photoshop Lightroom DVD-ROM Quick Start Guide Strap • The illustrations may differ from your actual items. • You can purchase optional accessories at a retailer or a Samsung service center.
My Camera Camera layout 1 2 3 4 No. 5 6 4 16 7 15 14 7 1 8 9 10 13 2 12 11 Name No. Name Command dial • In the Smart panel: Move to a desired 8 Image sensor 9 Speaker 10 NFC tag 11 Lens release button 12 Lens mount 13 Lens mount index 14 AF-assist light/Timer lamp 15 Power switch 16 Shutter button option or adjust a selected option. • In Shooting mode: Access a Mode screen in Shooting mode or adjust shutter speed, aperture value, or exposure value in some shooting modes.
My Camera > Camera layout No. 1 Name Video recording button Start recording a video. Status lamp 1 2 3 4 2 3 4 Indicate the status of the camera. • Blinking: When saving a photo, shooting a video, sending data to a computer, connecting to WLAN, or sending a photo. • Steady: When there is no data transfer between the camera and a computer, or the battery is charging. Mode button Access the Mode screen. (p. 36) Playback button Enter Playback mode.
My Camera > Camera layout Using the DIRECT LINK button You can turn on the Wi-Fi feature conveniently by pressing [DIRECT LINK]. Press [DIRECT LINK] again to return to the previous mode. Setting the DIRECT LINK button You can select a Wi-Fi function to launch when you press [DIRECT LINK]. (p. 150) To set a DIRECT LINK option, In Shooting mode, touch DIRECT LINK → an option.
My Camera > Camera layout Using the command dial You can adjust options such as aperture value, shutter speed, or exposure value with the command dial in some shooting modes. Press the command dial, and then rotate it clockwise or anti-clockwise. You can also adjust some options with the command dial in the Smart panel. In the Smart panel, rotate the command dial to move to a desired option, press the command dial to select it, and then rotate the command dial to adjust the selected option.
My Camera Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Slide the lock up to release the battery. Battery lock Rechargeable battery Push the card gently until it disengages from the camera, and then pull it out of the slot. Insert a memory card with the goldcolored contacts facing down. Memory card Memory card Insert the battery with the Samsung logo facing up.
My Camera Charging the battery and turning on your camera Charging the battery Turning on your camera Before you use the camera for the first time, you must charge the battery. Plug the small end of the USB cable into your camera, and then plug the other end of the USB cable into the AC adapter. Set the Power switch to ON. • To turn your camera off, set the Power switch to OFF. • The initial setup screen appears when you turn on the camera for the first time. (p.
My Camera Performing the initial setup When you turn on your camera for the first time, the initial setup screen appears. The language is preset for the country or region where the camera is sold. You can change the language as desired. 4 Touch the up or down arrows to set an option. Date & Time Year Month Day 1 Touch Time Zone. 2 Drag the option list up or down, and then touch a time zone. Hr Min DST Time Zone [GMT +00:00] London • The screen may differ depending on the language selected.
My Camera Selecting a mode Select various modes and functions on the Mode screen. Mode description Mode Accessing a Mode screen In Shooting or Playback mode, press [h]. Press [h] again to return to the previous mode. You can also rotate the command dial to access a Mode screen in Shooting mode. Description Auto Capture a photo with a scene mode selected automatically by the camera. (p. 55) Smart Capture a photo with options that are preset for a specific scene. (p.
My Camera > Mode Selecting a mode Description • MobileLink: Send photos or videos to a smart phone. • • Wi-Fi • • • (p. 129) Remote Viewfinder: Use a smart phone as a remote shutter release and see a preview on your smart phone of an image from your camera. (p. 131) Auto Backup: Send photos or videos that you captured with the camera to a PC wirelessly. (p. 133) Email: Send photos or videos stored on the camera via email. (p. 135) SNS & Cloud: Upload photos or videos to file sharing websites. (p.
My Camera Selecting functions (options) Select menus or options by gently touching an item on the screen with your fingertip. 4 Drag the option list up or down, and then touch an option. • If you touch , a pop-up window with information on features and settings will be displayed. Using m AutoShare Photo Size 5472x3648 (3:2) Touch settings.
My Camera > Selecting functions (options) Using the Smart panel Touch on the screen to access some functions such as Exposure, ISO, and White Balance. 4 Drag the dial on the screen, and then touch the option. to adjust • You can also rotate the command dial to adjust the option. (p. 32) EV : 0.0 E.g. Adjusting the exposure value in Program mode 1 On the Mode screen, touch Expert → Program. 2 Touch 3 Touch EV. .
My Camera > Selecting functions (options) Using the touch screen Flicking: Gently flick your finger across the screen. Do not use sharp objects, such as pens or pencils, to touch the screen. You can damage the screen. Touching: Touch an icon to select a menu or an option. • The touch screen may not recognize your inputs if you touch multiple items at the same time. • When you touch or drag the screen, discolorations may occur.
My Camera Display icons In Shooting mode Icon Description Capturing photos 1 London F 2 3 Icon Description Auto focus frame Focus area Spot metering area Face detection Camera shake White Balance (p. 77) Manual focus scale White Balance micro adjustment Level gauge (p. 42) Optical Image Stabilization (OIS) (p. 93) Histogram (p. 150) Dynamic Range (p. 100) Focus Z on Shutter speed Z ratio Aperture value Smart Filter Exposure adjustment value ISO sensitivity (p. 76) 1.
My Camera > Display icons 2. Shooting options Recording videos 1 Icon Description Video size AF mode (p. 82) 2 Metering (p. 98) White Balance (p. 77) About the level gauge The level gauge helps you align the camera with the horizontal and vertical lines on the display. If the level gauge is not level, calibrate the level gauge using the Horizontal Calibration function. (p. 152) Vertical Optical Image Stabilization (OIS) (p. 93) White Balance micro adjustment 1. Shooting information Icon Fader (p.
My Camera > Display icons In Playback mode Viewing photos 1 Playing videos London Mode F No Shutter ISO Metering Flash Focal Length White Balance EV Photo Size Date Icon 2 Information 3 London Description No. Description Continuously captured file 1 2 Captured photo Playback speed RGB histogram (p.
My Camera > Display icons Changing the information displayed Touch Mode on the screen repeatedly to change the display type. Display type • Display shooting options at the right of the display, Shooting Playback Custom button, AutoShare button, Touch AF button, Display type button and basic shooting information (Shooting mode, Shutter speed, Aperture value, Exposure value, ISO sensitivity, AEL). • Display all information about shooting including histogram, date, and time. (p.
My Camera Lenses You can purchase optional lenses made exclusively for your NX series camera. Learn about the functions of each lens and select one that suits your needs and preferences. Lens layout SAMSUNG 20-50 mm F3.5-5.6 ED II lens (example) No. Description 1 2 Lens mount index 3 Lens 4 Focus ring (p. 90) 5 i-Function button (p.
My Camera > Lenses Locking or unlocking the lens To lock the lens, pull and hold the zoom lock switch away from the camera body and rotate the zoom ring as shown in the illustration. To unlock the lens, rotate the zoom ring as shown in the illustation until you hear the click. You cannot capture a photo when the lens is locked.
My Camera > Lenses SAMSUNG 18-55 mm F3.5-5.6 OIS III lens (example) 8 1 2 3 4 5 6 7 No. Description 1 2 Lens mount index 3 Focus ring (p. 90) 4 Lens hood mount index 5 Lens 6 i-Function button (p. 67) 7 AF/MF switch (p. 82) 8 Lens contacts Zoom ring When not using the lens, attach the lens cap and lens mount cover to protect the lens from dust and scratches.
My Camera > Lenses SAMSUNG 16 mm F2.4 lens (example) SAMSUNG 45 mm F1.8 [T6] 2D/3D (example) 6 5 1 2 1 2 3 3 4 4 5 No. Description 1 2 3 i-Function button (p. 67) 4 Lens 5 Lens contacts Lens mount index Focus ring (p. 90) No. Description 1 i-Function button (p. 67) 2 3 4 Lens mount index 5 2D/3D switch (p. 70) 6 Lens contacts Focus ring (p.
My Camera > Lenses Lens markings No. Find out what the numbers on the lens signify. 1 Description Aperture value SAMSUNG 18-200 mm F3.5-6.3 ED OIS lens (example) A range of supported aperture values. For example, 1:3.5–6.3 means the maximum aperture value range from 3.5 to 6.3. Focal length 2 The distance from the middle of the lens to its focal point (in millimeters). This figure is expressed in a range: minimum focal length to maximum focal length of the lens.
My Camera Accessories You can use accessories including external flash and GPS module that can help you capture better and more convenient photos. For more information about optional accessories, refer to the manual for each accessory. External flash layout SEF8A (example) 1 • The illustrations may differ from the actual items. • You can purchase Samsung-approved accessories at a retailer or a Samsung service center.
My Camera > Accessories Connecting the external flash 1 Remove the hot-shoe cover from the camera. 2 Mount the flash by sliding it into the hot-shoe. 3 Lock the flash into place by turning the hot-shoe fastening dial clockwise. 4 Lift up the flash for use.
My Camera > Accessories • You can capture a photo with a flash that is not fully charged, but it is • • • • • recommended to use a fully charged flash. Refer to the optional accessories page for available external flashes. (p. 195) The available options may differ depending on the shooting mode. There is an interval between two bursts of the flash. Do not move until the flash fires a second time. SEF8A may not be compatible with other NX series cameras.
My Camera > Accessories GPS module layout (optional) 1 Attaching the GPS module 1 Remove the hot-shoe cover from the camera. 2 Mount the GPS module by sliding it into the hot-shoe. 2 3 4 5 No.
My Camera > Accessories 3 Lock the GPS module into place by turning the hot-shoe fastening dial towards LOCK. 4 Press the power button of the GPS module.
My Camera Shooting modes Two simple shooting modes—Auto and Smart mode—help you capture photos with numerous automatic settings. Additional modes allow for greater customization of settings. Auto mode In Auto mode, the camera recognizes surrounding conditions and automatically adjusts factors that contribute to exposure, including shutter speed, aperture value, metering, White Balance, and exposure compensation. As the camera controls most of the functions, some shooting functions are limited.
My Camera > Shooting modes Recognizable scenes Icon Icon Description Description Forested areas typically consist of green-colored subjects Landscapes Close-up photos of colorful subjects Scenes with bright white backgrounds Camera is stabilized on a tripod and the subject is not moving for a certain period of time.
My Camera > Shooting modes Smart mode In Smart mode, you can capture photos with options that are preset for a specific scene. Option Description Action Freeze Capture subjects moving at high speed. Rich Tones Capture a photo with vibrant colors. Panorama Capture a wide panoramic scene in a single photo. 1 On the Mode screen, touch Smart. Waterfall Capture scenes with waterfalls. 2 Touch a scene. Silhouette Capture subjects as dark shapes against a light background.
My Camera > Shooting modes Using the Best Face mode 5 • Repeat steps 4 and 5 to replace the rest faces of the photo. In Best Face mode, you can capture multiple photos and replace faces to create the best possible image. Use this mode to select the best image for each individual when capturing group photos. 1 On the Mode screen, touch Smart → Best Face. 2 Align your subject in the frame, and then half-press [Shutter] to focus. 3 Press [Shutter] to capture the photo.
My Camera > Shooting modes Capturing panoramic photos 5 Capture a 2D or 3D panoramic photo. Captured 3D panoramic photos can be viewed only on a 3D TV or 3D monitor. With [Shutter] pressed, slowly move the camera in the direction you selected. • In 3D Panorama mode, you can capture a scene only in horizontal directions. 1 On the Mode screen, touch Smart → Panorama. • An arrow toward the direction of motion is displayed, and the entire shooting image is displayed in the preview box.
My Camera > Shooting modes • The resolution varies depending on the panoramic photo you captured. • In Panorama mode, some shooting options are not available. • The camera may stop shooting due to the shooting composition or the subject's movement. • In Panorama mode, your camera may not capture the entire last scene if you • • • • stop moving the camera to improve the photo quality. To capture the entire scene, move your camera slightly beyond the point where you want the scene to end.
My Camera > Shooting modes Program mode 1 On the Mode screen, touch Expert → Program. The camera automatically adjusts shutter speed and aperture value so that an optimal exposure value can be achieved. 2 Set the desired options. This mode is useful when you want to capture shots of constant exposure while being able to adjust other settings. • For a list of options, refer to "Shooting Functions". (p. 73) 3 Half-press [Shutter] to focus, and then press [Shutter] to capture the photo.
My Camera > Shooting modes Aperture Priority mode 1 On the Mode screen, touch Expert → Aperture Priority. In Aperture Priority mode, the camera automatically calculates shutter speed according to the aperture value you choose. 2 Press the command dial once, and then rotate it to the left or right to adjust the aperture value. You can adjust the depth of field (DOF) by changing the aperture value. This mode is useful for taking portraits, flowers, or landscape shots. 3 Set the desired options.
My Camera > Shooting modes Shutter Priority mode 1 On the Mode screen, touch Expert → Shutter Priority. In Shutter Priority mode, the camera automatically adjusts the aperture value according to the shutter speed you choose. This mode is useful for capturing photos of fast-moving subjects or for creating tracer effects in a photo. 2 Press the command dial once, and then rotate it to the left or right to adjust the shutter speed. 3 Set the desired options.
My Camera > Shooting modes Manual mode Manual mode lets you adjust the shutter speed and aperture value manually. In this mode, you can fully control the exposure of your photos. This mode is useful in controlled shooting environments, such as a studio, or when it is necessary to fine-tune camera settings. The Manual mode is also recommended for shooting night scenes or fireworks. 1 On the Mode screen, touch Expert → Manual. 2 Press the command dial to select the shutter speed or the aperture value.
My Camera > Shooting modes Custom mode Selecting a custom mode Custom mode lets you create your own shooting modes by adjusting options and saving them. On the Mode screen, touch Expert → Custom. 2 Touch a mode → . • To select another custom mode, touch Custom Mode → a mode. Saving a custom mode 1 1 On the Mode screen, touch Expert → Program, Aperture Priority, Shutter Priority, or Manual. • You can change the shooting options in the selected custom mode, and save them as a new custom mode.
My Camera > Shooting modes Recording a video In Shooting mode, you can record Full HD videos (1920X1080) by pressing (Video recording). The camera lets you record a video up to 29 minutes and 59 seconds in length at 30, 24, or 15 fps, and saves the files in MP4 (H.264) format. The maximum recording time when you select is 20 minutes. 24 fps is available only with 1920X810. 15 fps is available only with some Smart Filter options. The sound is recorded via the camera's microphone.
My Camera > Shooting modes • If you change the shooting angle of the camera suddenly while shooting a • • • • • • • movie, the camera may not be able to record images accurately. Use a tripod to minimize camera shake. The camera supports only the Multi AF function when recording a video. You cannot use any other focus area setting functions, such as Face Detection AF.
My Camera > 3 Shooting modes Adjust the focus ring to select an option. • You can also rotate the command dial or drag the screen to select an option. 4 Half-press [Shutter] to focus, and then press [Shutter] to capture the photo.
My Camera > Shooting modes Using Z 3 • You can also rotate the command dial or drag the screen to select The Z allows you to zoom in on a subject with less degradation of photo quality than the Digital zoom. However, the photo resolution may change compared to when you zoom in by rotating the zoom ring. 1 2 Adjust the focus ring to select a zoom ratio. an option. • Photo resolution varies according to the zoom ratio if you use the Z.
My Camera > Shooting modes 3D mode You can capture 3D photos or videos with an optional 3D lens. 3D mode is always on, regardless of the camera mode. To start a pre-defined Wi-Fi function, press [DIRECT LINK]. Some Wi-Fi features may not be available. • • • • • • • • • • SAMSUNG 45 mm F1.8 [T6] 2D/3D lens (example) Set the 2D/3D switch on the lens to 3D, and then capture a photo or video 1.5-5 m away from the subject.
My Camera > Shooting modes Available functions by shooting mode For details about shooting functions, see Chapter 2. Press a shortcut for each function. Function Auto Smart Program Aperture Priority Shutter Priority Manual 3D Photo Size (p. 74) O O O O O O O Quality (p. 75) O O O O O - - O O O O O O O O O O O O O O O O O - O O O O O O AF Area (p. 85) - O O O O O - Touch AF (p. 88) O O O O O O O MF Assist (p.
My Camera > Shooting modes Auto Smart Program Aperture Priority Shutter Priority Manual 3D OIS (Anti-Shake) (p. 93) O O O O O O O Drive (Continuous/Burst/Timer/ Bracketing) (p. 94) O O O O O O O - O O O O Dynamic Range (p. 100) - O O O O Flash (p. 101) O O O O O O Exposure compensation (p. 104) - - O O O O O O - - Function Metering (p. 98) Exposure lock (p. 105) O: The option is available. Some options may be limited or may not be changeable.
Chapter 2 Shooting Functions Learn about the functions you can set in Shooting mode. You can enjoy more customized photos and videos by using the shooting functions.
Shooting Functions Size and Resolution Photo size Icon As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. Select a low resolution for photos that will be displayed in a digital picture frame or uploaded to the web. To set the size, In Shooting mode, touch an option.
Shooting Functions > Size and Resolution Quality Icon The camera saves photos in either the JPEG or RAW format. Photos captured by a camera are often transformed to the JPEG format and stored in the memory according to the settings of the camera at the time of shooting. RAW files are not transformed to the JPEG format and are stored in the memory without any changes. RAW files have the file extension “SRW”.
Shooting Functions ISO sensitivity The ISO sensitivity value represents the sensitivity of camera to light. Examples The larger the ISO value, the more sensitive the camera is to light. Consequently, by selecting a higher ISO sensitivity value, you can capture photos in dim or dark places at faster shutter speeds. However, this may increase electronic noise and result in a grainy photo. To set ISO sensitivity, In Shooting mode, touch option.
Shooting Functions White Balance White Balance represents the light source that influences on the color of a photo. The color of a photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the White Balance, such as Auto WB, Daylight, Cloudy, Tungsten, or adjust color temperature manually.
Shooting Functions > Icon White Balance Customizing preset White Balance options Description Color Temperature: Manually adjust the color temperature of the light source. Color temperature is a measurement in degrees Kelvin that indicates the specific type of light source. As the color temperature increases, the color distribution becomes cooler. Alternatively, as the color temperature decreases, the color , and then adjust the distribution becomes warmer. Touch color tempertature.
Shooting Functions > White Balance Examples Auto WB Daylight Fluorescent Daylight Tungsten 79
Shooting Functions Picture Wizard (photo styles) Picture Wizard lets you apply different photo styles to your photo to create various looks and emotional moods. You can also create and save your own photo styles by adjusting color, saturation, sharpness, and contrast for each style. There is no rule for which style is suitable in which conditions. Experiment with different styles and find your own settings. To set a photo style, In Shooting mode, touch → an option → .
Shooting Functions Smart Filter Smart Filter lets you apply special effects to your photos. You can select various filter options to create special effects that are difficult to be achieved with normal lenses. Option Description Negative Apply a negative film effect. Red Desaturate all colors but red. → 1 → Smart Filter → Green Desaturate all colors but green. Blue Desaturate all colors but blue. Yellow Desaturate all colors but yellow.
Shooting Functions AF mode Learn how to adjust the camera’s focus according to the subjects. You can select a focusing mode appropriate to the subject among Single Auto Focus, Continuous Auto Focus, and Manual Focus. The AF function is activated when you press [Shutter] halfway. In the MF mode, you have to rotate the focus ring on the lens to focus manually. To set the auto focus mode, In Shooting mode, touch an option. → 1 → AF Mode → The available options may differ depending on the lens in use.
Shooting Functions > AF mode Single AF Continuous AF Single AF is appropriate for shooting a still subject. When you press [Shutter] halfway, the focus fixes in the focus area. The area turns green when the focus is achieved. While you are pressing [Shutter] halfway, the camera continues to automatic focusing. Once the focus area is fixed on the subject, the subject is always in focus even when moving. This mode is recommended for shooting a person on a bicycle, a running dog, or a car racing scene.
Shooting Functions > AF mode Manual focus You can manually focus on a subject by rotating the focus ring on the lens. The MF Assist function lets you easily achieve a focus. While you are rotating the focus ring, the focus area is magnified. When you use the Focus Peaking function, the color you selected appears on the focused subject. This mode is recommended for shooting an object similar in color to the background, a night scene, or fireworks.
Shooting Functions AF area The AF area function changes the positions of the focus area. Selection AF Generally, cameras focus on the nearest subject. When there are a lot of subjects, however, unwanted subjects can be in focus. In order to prevent unwanted subjects from being in focus, change the focus area so that a desired subject is in focus. You can get a clearer and sharper photo by selecting an appropriate focus area. You can set the focus on an area you want.
Shooting Functions > AF area Multi AF Face detection AF The camera displays a green rectangle in places where focus is set correctly. The photo is divided into two or more areas, and the camera obtains focus points of each area. It is recommended for scenery photos. The camera focuses on human faces preferentially. Faces of up to 10 people can be detected. This setting is recommended for shooting a group of people.
Shooting Functions > AF area Self-Portrait AF It can be difficult to check whether your face is in focus when you are taking a self-portrait. When this function is on, the beep from the camera gets faster when your face is located at the center of the composition.
Shooting Functions Touch AF Focus on the subject or capture a photo by touching on the screen. To set Touch AF, In Shooting mode, touch an option. → 1 → Touch AF → Available options may differ depending on the shooting conditions. Tracking AF Tracking AF allows you to track and automatically focus on your subject, even when the subject is moving or when you change the shooting composition. White frame: Your camera is tracking the subject.
Shooting Functions > Touch AF • If you do not select a focus area, the Auto Focus function does not work. • Tracking a subject may fail when: - the subject is too small - the subject moves excessively - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the subject includes horizontal patterns, such as blinds - the camera shakes excessively • When tracking fails, the feature will be reset.
Shooting Functions Focus assist In the manual focus mode, you have to rotate the focus ring on the lens to focus. When you use the MF Assist function or the Focus Peaking function, you can achieve a clearer focus. This function is only available on a lens that supports manual focus. * Default Option Description The focus area is magnified by 8 times when you rotate the focus ring.
Shooting Functions > Focus assist Measuring the exposure value of the focus area When this function is turned on, the camera automatically sets an optimal exposure by calculating the brightness of the focus area. This function is only available when you select Spot metering or Multi metering, and Selection AF. To set this function, In Shooting mode, touch Point → an option.
Shooting Functions Framing mode When you adjust the aperture value or shutter speed, the exposure changes according to the settings, so the display may darken. With this function on, the brightness of the display is constant regardless of the settings, so you can better frame your shot. To use Framing Mode, In Shooting mode, touch an option.
Shooting Functions Optical Image Stabilization (OIS) Use the Optical Image Stabilization (OIS) function to minimize camera shake. OIS may not be available with some lenses. Camera shake tends to occur in dark places or when shooting indoors. In such cases, the camera uses slower shutter speeds in order to increase the amount of light taken in, which can result in a blurry photo. You can prevent this situation by using the OIS function.
Shooting Functions Drive (shooting method) You can set the shooting method such as Continuous, Burst, Timer and so on. Select Single to capture one photo at a time. Select Continuous or Burst to shoot fast moving subjects. Select AE Bracket, WB Bracket, or P Wiz Bracket to adjust exposure, White Balance, or apply Picture Wizard effects. You can also select Timer to capture a photo of yourself. To set the shooting method, In Shooting mode, touch option → .
Shooting Functions > Drive (shooting method) Burst Timer Consecutively capture up to 10 shots per second (3 seconds), 15 shots per second (2 seconds), or 30 shots per second (1 second) when you press [Shutter] once. It is recommended for shooting the rapid motion of fast moving subjects such as racing cars. Capture a photo with a delay of 2 to 30 seconds. The delay is adjustable in increments of 1 second.
Shooting Functions > Drive (shooting method) Auto Exposure Bracketing (AE Bracket) White Balance Bracketing (WB Bracket) When you press [Shutter], the camera captures 3 consecutive photos: the original, one a step darker, and one a step lighter. Use a tripod to prevent blurry photos as the camera captures three photos continuously. You can adjust the settings in Bracket Set menu.
Shooting Functions > Drive (shooting method) Picture Wizard Bracketing (P Wiz Bracket) When you press [Shutter], the camera captures three consecutive photos, each with a different Picture Wizard setting. The camera captures a photo and applies the three Picture Wizard options you have set to the image captured. You can select three different settings in Bracket Set menu.
Shooting Functions Metering The metering mode refers to the way in which a camera measures the quantity of light. The camera measures the amount of light in a scene, and in many of its modes, uses the measurement to adjust various settings. For example, if a subject looks darker than its actual color, the camera captures an overexposed photo of it. If a subject looks lighter than its actual color, the camera captures an underexposed photo of it.
Shooting Functions > Metering Spot Center-weighted The Spot mode calculates the amount of light in the center. When you capture a photo in conditions where there is a strong backlight behind a subject, the camera adjusts the exposure so as to shoot a subject correctly. For example, when you select the Multi mode in a strong backlight condition, the camera calculates that the overall amount of light is abundant, which results in a darker photo.
Shooting Functions Dynamic Range This function automatically corrects the loss of bright detail that can occur due to shading differences in the photo. To set Smart Range options, In Shooting mode, touch Dynamic Range → an option. Without Dynamic Range effect Icon →1→ With Dynamic Range effect Description Off: Do not use Dynamic Range. Smart Range+: Correct the loss of bright detail. You cannot set ISO 100.
Shooting Functions Flash In order to capture a realistic photo of a subject, the amount of light should be constant. When the light source varies, you can use a flash and supply a constant amount of light. Select appropriate settings according to a light source and a subject. To set flash options, Icon In Shooting mode, touch an option → . → 1 → Flash → Description Off: Do not use the flash.
Shooting Functions > Flash Reducing the red-eye effect Adjusting the flash intensity If the flash fires when you capture a photo of a person in the dark, a red glow may appear in the eyes. To reduce the red-eye effect, select Auto Red-eye or Fill-in Red. When the flash is on, adjust the flash intensity +/-2 levels. To set the flash intensity, In Shooting mode, touch → Flash → an option → → Drag the slider or touch +/- to adjust the intensity → touch .
Shooting Functions > Flash → 1 → Flash → an option → , in Shooting mode to access the flash intensity menu. Adjusting the flash intensity may not be effective when: - the subject is too close to the camera - you set a high ISO sensitivity - the exposure value is too big or too small In some shooting modes, you cannot use this function. If you attach an intensity-adjustable external flash to the camera, the intensity settings of the flash will be applied.
Shooting Functions Exposure compensation The camera automatically sets the exposure by measuring the levels of light from the photo’s composition and the position of a subject. If the exposure set by the camera is higher or lower than you expected, you can adjust the exposure value manually. The exposure value is adjustable in ±3 increments. The camera displays the exposure warning in red for each step beyond ±3 range.
Shooting Functions Exposure lock When you cannot achieve an appropriate exposure because of a strong color contrast, lock the exposure, and then capture a photo. After locking the exposure, aim the lens where you desire, and then press [Shutter]. To lock the exposure value, adjust the photo’s exposure, and then touch the custom button. • Set a function of the custom button to AEL to lock the current exposure value. (p. 150) • This feature is not available in Manual mode.
Shooting Functions Video functions The functions available for video are explained below. Movie quality Set the Movie quality. Movie size To set movie quality options, Set the movie size. To set movie size options, Icon In Shooting mode, touch an option. → 6 → Movie Size → Size Recommended for 1920X1080 (30 fps) (16:9) View on a Full HDTV. 1920X1080 (15 fps) (16:9) View on a Full HDTV. (Available only with some Smart Filter options.) 1920X810 (24 fps) (Approx. 2.35:1) View on an HDTV.
Shooting Functions > Video functions Multi Motion Fader Set the playing speed of a video. You can fade in or fade out a scene using the fader function on the camera without having to do it on a PC. Set the fade in option to gradually fade in at the start of the scene. Set the fade out option to gradually fade out the scene. Use the function appropriately and add dramatic effects on your videos. To set playing speed options, Icon In Shooting mode, touch an option.
Shooting Functions > Video functions Voice Sometimes, a muted video is more appealing than the one with sound. Turn the voice off to record a muted video. To set voice options, In Shooting mode, touch an option. → 6 → Voice → Wind cut When you record videos in noisy environments, unintended sounds can be recorded in videos. In particular, severe wind noise recorded in videos distracts you from enjoying your videos. Use the Wind Cut function to remove some surrounding noise in addition to wind noise.
Chapter 3 Playback/Editing Learn about how to play back and edit photos and videos. Refer to chapter 6 for editing files on a PC.
Playback/Editing Searching and managing files Learn how to view photo and video thumbnails and how to protect or delete files. If you perform no operations for a while, information and icons on the screen disappear. When you operate the camera again, they will reappear. Viewing image thumbnails In order to search for photos and videos you want, convert to the thumbnail view. The thumbnail view displays multiple images at a time so that you can easily look through items you wish to find.
Playback/Editing > Searching and managing files Viewing files by category 1 In the thumbnail view, touch a category. • You can also touch Viewing files as a folder → z → Filter → Continuous and burst shots appear as a folder. Selecting a folder will play back all photos automatically. Deleting a folder will delete all photos in the folder. to select a category. * Default Option Description All* View files normally. Date View files by the date they were saved. Type View files by the file type.
Playback/Editing > Searching and managing files Lock/Unlock all files Protecting files Protect your files from accidental deletion. → z → Protect → Select. 1 In Playback mode, touch 2 Touch / to scroll to a file, and then touch the check box. • Touch the check box again to cancel your selection. 3 Touch . Lock or unlock all files. 1 In Playback mode, touch 2 Touch an option. → z → Protect → All. Option Description Lock Lock all files. Unlock Unlock all files.
Playback/Editing > Searching and managing files Deleting multiple files Deleting files Delete files in Playback mode and secure more space on your memory card. Protected files are not deleted. You can select multiple files and delete them. 1 In Playback mode, touch • Alternatively, in thumbnails view, touch Deleting a single file In Playback mode, select a file, and then touch 2 When the pop-up message appears, touch Yes. and then select files to delete.
Playback/Editing Viewing photos Enlarging a photo Viewing a slide show You can enlarge photos when viewing them in Playback mode. You can also use the Trim function to extract the portion of the image displayed on the screen and save it as a new file. You can view photos in a slide show, apply various effects to the slide show, and play background music. → z → Slide Show Options. 1 In Playback mode, touch 2 Select a slide show effect option.
Playback/Editing > Viewing photos Creating a print order (DPOF) 3 Touch 4 Touch Start Slide Show. 5 View the slide show. . DPOF (Digital Print Order Format) lets you set the number of copies to be printed. The camera saves the DPOF information in the MISC folder of your memory card. If you have set DPOF information for your images, you can take the memory card to a digital printing shop for printing. You cannot set the print order of RAW format files. • Touch to pause. • Touch again to resume.
Playback/Editing Playing videos In Playback mode, you can play a video, capture an image from a video, or crop a video to save as another file. Video viewing controls Icon Description Trimming a video during playback 1 In Playback mode, scroll to a video, and then touch 2 Touch to start playing the video. 3 Touch at the point where you want the trimming to begin. 4 Touch 5 Touch to resume playing the video. 6 Touch at the point where you want the trimming to end.
Playback/Editing > Playing videos Capturing an image during playback 1 While viewing a video, touch at the point where you want to capture an image. 2 Touch . • You cannot capture an image from a video recorded in 3D mode. • The resolution of the captured image will be the same as the original video. • The captured image is saved as a new file.
Playback/Editing Editing photos Perform photo editing tasks, such as resizing, rotating, or reducing red-eye effects. Edited photos are saved as new files under different file names. Photos captured in some modes cannot be edited with the Image Edit function. To edit images, In Playback mode, scroll to a photo, and then touch Cropping a photo 1 Touch 2 Drag the corners of the box to adjust the size of the area. 3 Drag the box to move the location of the area. 4 Touch 5 Touch → . .
Playback/Editing > Editing photos Rotating a photo Resizing photos 1 Touch Change the size of a photo and save it as a new file. 2 Touch an option. → . Rotate : Right 90° 1 Touch 2 Touch an option. → . Resize : 10.1M 3:2 3 Touch 4 Touch . to save. • You can also rotate a photo in Playback mode by touching Rotate → a desired option → . • The camera will overwrite the original file. →z→ 3 Touch 4 Touch . to save.
Playback/Editing > Editing photos Adjusting your photos You can correct captured photos by adjusting the brightness, contrast, or saturation. 1 Touch 2 Touch an option. .
Playback/Editing > Editing photos Retouching faces Reducing red-eye 1 Touch 1 Touch 2 Drag the slider or touch +/- to adjust the option. 2 Touch → . • As the number increases, the skin tone becomes brighter and → . . • To cancel correction, touch . smoother. 3 Touch 3 . • To cancel correction, touch 4 Touch Touch to save. . to save.
Playback/Editing > Editing photos Applying Smart Filter effects Option Description Oil Sketch Apply oil sketching effect. Ink Sketch Apply ink sketching effect. → an option. Acryl Apply an acryl painting effect. Smart Filter : Vignetting Negative Apply a negative film effect. Red Desaturate all colors but red. Green Desaturate all colors but green. Blue Desaturate all colors but blue. Yellow Desaturate all colors but yellow. Apply special effects to your photos.
Chapter 4 Wireless network Learn how to connect to wireless local area networks (WLANs) and use functions.
Wireless network Connecting to a WLAN and configuring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings. Icon Description Ad hoc AP Secured AP WPS AP Connecting to a WLAN 1 Signal strength On the Mode screen, touch Wi-Fi → Auto Backup, Email, SNS & Cloud, or Samsung Link. Open network setting options. • When you select a secured AP, a pop-up window appears. Enter the 2 Touch → Wi-Fi Setting.
Wireless network > Connecting to a WLAN and configuring network settings Setting network options Using the login browser 1 In the Wi-Fi Setting screen, move to an AP, and then touch 2 Select each option, and then enter the required information. . You can enter your login information via the login browser when connecting to some APs, sharing sites, or cloud servers. Icon Option Description Network Password Enter the network password. IP Setting Set the IP address automatically or manually.
Wireless network > Connecting to a WLAN and configuring network settings Network connection tips • You must insert a memory card to use the Wi-Fi features. • The quality of the network connection will be determined by the AP. • The further the distance between your camera and the AP, the longer it will take to connect to the network. • If a nearby device is using the same radio frequency signal as your camera, it may interrupt your connection.
Wireless network > Connecting to a WLAN and configuring network settings Entering text Learn how to enter text. The icons in the table let you move the cursor, change the case, etc. Touch a key to enter it. Icon Description Move the cursor. Stop entering text and return to the previous page. Change case. Switch between Symbol/Number mode and the normal mode. Change the input language. Enter a space. Save the displayed text. Delete the last letter.
Wireless network Saving files to a smart phone automatically The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone automatically. 3 • For iOS devices, turn on the Wi-Fi feature before turning on the application. • To start the application automatically on an NFC-enabled smart • The AutoShare feature is supported by Galaxy series smart phones, Galaxy • • • • • Tab models, or iOS devices.
Wireless network Sending photos or videos to a smart phone The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone. • The MobileLink feature is supported by Galaxy series smart phones, Galaxy • • • • • • • Tab models, or iOS devices. Before using this feature, update the device’s firmware to the latest version. If the firmware version is not the most recent, this function may not perform properly.
Wireless network > 4 Sending photos or videos to a smart phone Select the camera from the list and connect the smart phone to the camera. • The smart phone can connect to only one camera at a time. 5 On the camera, allow the smart phone to connect to your camera. • If the smart phone has been connected to your camera before, it is connected automatically. 6 On the smart phone or camera, select files to transfer from the camera.
Wireless network Using a smart phone as a remote shutter release The camera connects to a smart phone that supports the Remote Viewfinder feature via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the smart phone. • The Remote Viewfinder feature is supported by Galaxy series smart phones, Galaxy Tab models, or iOS devices. Before using this feature, update the device’s firmware to the latest version.
Wireless network > 4 Using a smart phone as a remote shutter release On the camera, allow the smart phone to connect to your camera. 6 • You can touch the area on the screen where you want to focus. connected automatically. On the smart phone, set the following shooting options. Icon Description Timer option to capture the photo. • Photos saved to the smart phone will be resized to 1616X1080 and to 1920X1080 when shooting in smart phone may vary, depending on your surroundings.
Wireless network Using Auto Backup to send photos or videos You can send photos or videos that you captured with the camera to a PC wirelessly. Sending photos or videos to a PC 1 On the Mode screen, touch Wi-Fi → Auto Backup. • If the pop-up message that prompts you to download the Installing the program for Auto Backup on your PC 1 Install i-Launcher on the PC. (p. 163) 2 Connect the camera to the PC with the USB cable. 3 When the Auto Backup program icon appears, click it.
Wireless network > 3 Using Auto Backup to send photos or videos Touch OK. • When you connect the camera to the WLAN, select the AP that is connected to the PC. • To cancel sending, touch Cancel. • You cannot select individual files to backup. This function backs up only new files on the camera. • The backup's progress will be shown on the PC monitor. • When the transfer is completed, the camera will turn off automatically in approximately 30 seconds.
Wireless network Sending photos or videos via email You can change settings in the email menu and send photos or videos stored on the camera via email. 4 Touch the Name box, enter your name, and then touch . Sender Setting Name Changing email settings Email In the email menu, you can change settings for storing your information. You can also set or change the email password. For information about entering text, refer to "Entering text". (p.
Wireless network > Sending photos or videos via email Setting an email password 1 On the Mode screen, touch Wi-Fi → Email. 5 Enter a 4-digit password. 6 Enter the password again. 7 When the pop-up appears, touch OK. • The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. • If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 124) 2 Touch 3 Touch Setting Password → On. .
Wireless network > Sending photos or videos via email Changing the email password 1 On the Mode screen, touch Wi-Fi → Email. • The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. • If the camera has not previously been connected to a WLAN, it will Sending photos or videos via email You can send photos or videos stored on the camera via email. For information about entering text, refer to "Entering text". (p.
Wireless network > 3 Sending photos or videos via email Touch the Receiver box, enter an email address, and then touch . • To use an address from the list of previous recipients, touch • Even if a photo appears to have transferred successfully, errors with the → an address. • Touch to add additional recipients. You can input up to 30 recipients. • Touch to delete an address from the list. 4 Touch Next. 5 Select files to send.
Wireless network Using photo or video sharing websites Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera. To upload files to some websites, you must visit the website and register before connecting your camera. 3 Enter your ID and password to log in. • For information about entering text, refer to "Entering text". (p. 127) • If you connected to SkyDrive, refer to "Using the login browser".
Wireless network > Using photo or video sharing websites Uploading photos or videos • You can set an upload folder for Facebook by touching 1 Access the website with your camera. • 2 Select files to upload. • You can select up to 20 files. The total size must be 10 MB or less. (On some websites, the total size or number of files may vary.) • • 3 Touch Upload. • On some websites, you can enter your comments by touching the comment box.
Wireless network Using Samsung Link to send files You can upload files from your camera to Samsung Link online storage or view files on a Samsung Link device connected to the same AP. 2 Enter your ID and password, and then touch Login → OK. • For information about entering text, refer to "Entering text". (p. 127) • To select an ID from the list, touch • If you have previously logged in to the website, you may be logged Uploading photos to online storage 1 → an ID. in automatically.
Wireless network > Using Samsung Link to send files Viewing photos or videos on devices that support Samsung Link 1 On the Mode screen, touch Wi-Fi → Samsung Link → Nearby devices. • If the guide message appears, touch Yes. • The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. • If the camera has not previously been connected to a WLAN, it will 4 On the Samsung Link device, select a camera to connect.
Wireless network > Using Samsung Link to send files • You can share up to 1,000 recent files. • On a Samsung Link device, you can view only photos or videos captured with • • • • • • • • • • your camera. The range of the wireless connection between your camera and a Samsung Link device may vary depending on the specifications of the AP. If the camera is connected to 2 Samsung Link devices, playback may be slower. Photos or videos will be shared in their original sizes.
Wireless network Sending photos using Wi-Fi Direct When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some devices. 5 On the device, allow the camera to connect to the device. • The photo will be sent to the device. 1 On the device, turn on the Wi-Fi Direct option. • You can send up to 20 files at a time.
Chapter 5 Camera settings menu Learn about the user settings and general settings menu. You can adjust the settings to better suit your needs and preferences.
Camera settings menu User settings You can set the user environment with these settings. To set user options, In Shooting mode, touch → 5 → an option. Auto ISO Range You can set the maximum ISO value under which each EV step is chosen when you set the ISO to Auto. * Default Available items and the order of them may differ depending on shooting conditions.
Camera settings menu > User settings Bracket Set DMF (Direct Manual Focus) You can set up the options for AE Bracket, WB Bracket, and P Wiz Bracket. You can adjust the focus manually by rotating the focus ring after achieving the focus by half-pressing [Shutter]. This feature may not be available with some lenses. Option Description AE Bracket Set Set the exposure interval. (-/+0.3 EV*, -/+0.7 EV, -/+1 EV, -/+1.3 EV, -/+1.7 EV, -/+2 EV, -/+2.3 EV, -/+2.
Camera settings menu > User settings Color space The color space option allows you to select methods for representing colors. Digital imaging devices such as digital cameras, monitors, and printers have their own methods for representing colors, which are called color spaces. Option Description sRGB sRGB (Standard RGB) is an international specification to define the color space created by IEC (International Electrotechnical Commission).
Camera settings menu > User settings Distortion Correct User Display You can correct lens distortion that might occur from lenses. This feature may not be available with some lenses. You can add or remove shooting information from the display. 1 London Save as Custom Mode F 2 You can create your own shooting modes by adjusting options and saving them. (C1, C2, or C3) (p. 65) 3 iFn Customizing You can select options that can be adjusted when you press [i-Function] on an i-Function lens.
Camera settings menu > No. User settings Key Mapping Description Histogram Set the histogram on the display on or off. 3 You can change the function assigned to the Custom button ( screen or DIRECT LINK button on the camera. About histogram A histogram is a graph that shows the brightness distribution of a photo. A histogram inclined to the left indicates a dark photo. A histogram inclined to the right indicates a bright photo. The height of the graph is related to color information.
Camera settings menu > User settings Grid Line Select a guide to help you compose a scene. (Off*, 3 X 3, 2 X 2, Cross, Diagonal) AF Lamp When shooting in dark places, turn the AF lamp on in order to have a better auto focus. The Auto Focus functions more accurately in dark places when the AF lamp is on.
Camera settings menu Setting Learn to configure your camera's settings. * Default Item To set Setting options, In Shooting or Playback mode, touch an option. →q→ * Default Item Description • System Volume: Set the sound volume or turn all sound off entirely. (Off, Low, Medium*, High) Display Adjust Even if the system volume is turned off, the camera emits the sound while playing a video or a slide show.
Camera settings menu > Setting * Default Item Description * Default Item Description Video Out Set the video signal output appropriate for your country when connecting the camera to an external video device such as a monitor or HDTV.
Camera settings menu > Setting * Default Item Description * Default Item Set the method of creating file names. • Standard*: SAM_XXXX.JPG (sRGB)/ _SAMXXXX.JPG (Adobe RGB) • Date: Set the method of numbering files and folders. • Reset: After using the reset function, the next file name is started at 0001. • Series*: New file numbers continue the existing number sequence, even if you have installed a new memory card, formatted the card, or deleted all photos. - sRGB files - MMDDXXXX.JPG.
Camera settings menu > Setting * Default Item Description * Default Item • Geotagging: Set to capture photos with location Format the memory card. Formatting deletes all existing files including protected files. (Yes, No) Format Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos.
Camera settings menu > Setting * Default Item Description • Sensor Cleaning: Remove dust from the sensor. • Start-Up Action: When on, the camera performs sensor cleaning each time you turn it on. (Off*, On) Sensor Cleaning As this product uses interchangeable lenses, the sensor can get dust on it when you change lenses. This can lead to dust particles appearing in the photos you capture. It is recommended not to change lenses when you are in a particularly dusty area.
Chapter 6 Connecting to external devices Make full use of the camera by connecting it to external devices such as a computer, HDTV or 3D TV.
Connecting to external devices Viewing files on an HDTV or 3D TV Play back photos or videos by connecting your camera to an HDTV (3D TV) using an optional HDMI cable. 5 Turn on the camera. • The camera automatically enters into Playback mode when you connect it to an HDTV. 6 Viewing files on an HDTV 1 In Shooting or Playback mode, touch HDMI Output → an option. (p. 153) →q→ 2 Turn off your camera and HDTV. 3 Connect your camera to your HDTV with the optional HDMI cable.
Connecting to external devices > Viewing files on an HDTV or 3D TV Viewing files on a 3D TV 6 You can view photos or videos captured in 3D mode or with the 3D Panorama option in Smart mode on a 3D TV. 1 In Shooting or Playback mode, touch HDMI Output → an option. (p. 153) • 7 →q→ 2 Turn off your camera and 3D TV. 3 Connect your camera to your 3D TV with the optional HDMI cable. Move to a 3D file, and then touch Touch to switch to 3D mode. to switch to 2D Mode. Turn on your TV's 3D function.
Connecting to external devices Transferring files to your computer Transfer files on a memory card to your computer by connecting the camera to the computer. Transferring files to your Windows OS computer 3 Turn on the camera. • The computer recognizes the camera automatically. 4 On your computer, select My Computer → Removable Disk → DCIM → 100PHOTO or 101_0101. 5 Select the files you want, and then drag or save them to your computer.
Connecting to external devices > Transferring files to your computer Disconnecting the camera (for Windows XP) Transferring files to your Mac OS With Windows Vista, Windows 7, and Windows 8, the methods for disconnecting the camera are similar. 1 Ensure that no data is being transferred between the camera and the computer. • If the status lamp on your camera is blinking, it means the data transfer is in progress. Please wait until the status lamp stops blinking.
Connecting to external devices > 3 Transferring files to your computer Turn on the camera. • The computer recognizes the camera automatically and displays a removable disk icon. 4 Open the removable disk. 5 Transfer photos or videos to the Mac OS computer.
Connecting to external devices Using programs on a computer You can view and edit files using the provided programs. You can also send the files to a computer wirelessly. Using i-Launcher i-Launcher allows you to play back files with Multimedia Viewer and provides a link to download the PC Auto Backup program. Installing programs from the provided CD 1 Insert the installation CD into your computer. 2 3 Requirements for Windows OS Item Requirements Select a language. CPU Intel Core 2 Duo® 2.
Connecting to external devices > Using programs on a computer • The requirements are recommendation only. i-Launcher may not work properly even when the computer meets the requirements, depending on the condition of your computer. • If your computer does not meet the requirements, videos may not play correctly. The manufacturer is not responsible for any damage that results from using unqualified computers such as a computer you assembled yourself.
Connecting to external devices > Using programs on a computer Using Multimedia Viewer Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click Multimedia Viewer. • Multimedia Viewer supports the following formats: - Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF, MPO • Files that have been recorded with other manufacturers’ devices may not play back smoothly. Viewing photos 1 No.
Connecting to external devices > Using programs on a computer Viewing videos 1 No. Description 6 Pause 7 Move to the previous file. 8 Progress bar Downloading the firmware From the Samsung i-Launcher screen, click Firmware Upgrade. Downloading the PC Auto Backup program 2 8 No. Description 1 File name 2 Adjust the volume. 3 Open the selected file. 4 Move to the next file. 5 Stop 7 6 5 4 From the Samsung i-Launcher screen, click PC Auto Backup.
Connecting to external devices > Using programs on a computer Installing Adobe Photoshop Lightroom Using Adobe Photoshop Lightroom 1 Insert Adobe Photoshop Lightroom DVD-ROM into your computer. 2 Select a language. 3 Follow the on-screen instructions. Photos captured by a camera are often transformed to JPEG formats and stored in the memory according to the settings of the camera at the time of shooting. RAW files are not transformed to JPEG formats and are stored in the memory without any changes.
Chapter 7 Appendix Get information about error messages, camera maintenance, trouble shooting tips, specifications, and optional accessories.
Appendix Error messages When the following error messages appear, try these remedies. Error messages Suggested remedies Folder and file number are max values. Replace the card File names do not match the DCF standard. Transfer the files on the memory card to your computer and format the card. (p. 155) Error messages Suggested remedies Lens is locked The lens is locked. Rotate the lens counter-clockwise until you hear a click. (p. 46) Card Error • Turn off your camera, and then turn it on again.
Appendix Maintaining the camera Cleaning the camera Camera lens and display Use a brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently. Image sensor Depending on different shooting conditions, dust may appear in photos because the image sensor is exposed to the external environment. This problem is normal, and the exposure to dust occurs in everyday use of the camera.
Appendix > Maintaining the camera Using or storing the camera Using on beaches or shores • Protect your camera from sand and dirt when you use it on beaches or in Inappropriate places to use or store the camera • Avoid exposing the camera to very cold or very hot temperatures. • Avoid using your camera in areas with extremely high humidity, or other similar areas. • Your camera is not waterproof. Do not handle the battery, adapter, or memory card with wet hands.
Appendix > Maintaining the camera Using the camera with caution in humid environments When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it. Other cautions • Do not swing your camera by the strap.
Appendix > Maintaining the camera About memory card Supported memory card This product supports microSD (Secure Digital), microSDHC (Secure Digital High Capacity), or microSDXC (Secure Digital eXtended Capacity) memory cards. Memory card adapter Memory card To read data with a computer or memory card reader, insert the memory card into a memory card adapter.
Appendix > Maintaining the camera Memory card capacity The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 2 GB SD card. Quality Size Photo Super Fine Fine Normal RAW RAW + S.Fine RAW + Fine RAW + Normal 20.0M (5472X3648) 130 163 217 39 30 31 33 10.1M (3888X2592) 277 356 505 - 33 34 35 5.9M (2976X1984) 471 570 727 - 35 36 36 2.
Appendix > Maintaining the camera Size 1920X1080 (30 fps) * 1920X1080 (15 fps) 1920X810 (24 fps) Video 1280X720 (60 fps) 1280X720 (30 fps) 640X480 (30 fps) For Sharing (30 fps) * • • • • • • Quality HQ Normal Approx. 17' 21" Approx. 21' 44" Approx. 23' 02" Approx. 28' 50" Approx. 21' 11" Approx. 26' 31" Approx. 16' 33" Approx. 20' 42" Approx. 28' 38" Approx. 35' 53" Approx. 70' 48" Approx. 88' 58" Approx. 213' 41" Approx. 271' 09" is available only with some Smart Filter options.
Appendix > Maintaining the camera Cautions when using memory cards • Avoid memory cards to very cold or very hot temperatures (below 0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards to malfunction. • Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card. • Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera.
Appendix > Maintaining the camera About the battery • Do not rest the device on flammable surfaces, such as bedding, carpets, or Use only Samsung-approved batteries. • When the device is switched on, do not leave it in any confined space for a electric blankets for a prolonged period. prolonged period. • Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches.
Appendix > Maintaining the camera Battery life Notes about using the battery Shooting mode Average time / Number of photos Photos Approx. 170 min/Approx. 340 photos Videos Approx. 130 min (Record videos at 1920X1080 resolution and 30 fps.) • The figures above are based on the CIPA test standards. Your results may differ depending on your actual usage. • Available shooting time differs depending on background, shooting interval, and use conditions.
Appendix > Maintaining the camera Cautions about using the battery Protect batteries, chargers, and memory cards from damage. Prevent batteries from making contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock. Notes about charging the battery • If the status lamp is off, make sure that the battery is inserted correctly.
Appendix > Maintaining the camera Notes about charging with a computer connected • Use only the provided USB cable. • The battery may not charge when: - you use a USB hub - other USB devices are connected to your computer - you connect the cable to the port on the front side of your computer - the USB port of your computer does not support the power output standard (5 V, 500 mA) Handle and dispose of batteries and chargers with care • Never dispose of batteries in a fire.
Appendix Before contacting a service center If you are having trouble with your device, try these troubleshooting solutions before contacting a service professional. Situation Suggested remedies • There is no space on the memory card. Delete unnecessary files or insert a new card. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Appendix > Before contacting a service center Situation Suggested remedies Situation • Turn off your camera, and then turn it on again. • Remove your memory card, and then insert it The memory card has an error again. • Format your memory card. See "Cautions when using memory cards" for more details. (p. 176) Your computer does not recognize a microSDXC memory card microSDXC memory cards use the exFAT file system.
Appendix > Before contacting a service center Situation Your computer does not recognize your camera Suggested remedies Situation Suggested remedies • Ensure that the USB cable is connected Cannot set the DPOF for RAW files You cannot set the DPOF for RAW files. correctly. • Ensure that your camera is switched on. • Ensure that you are using a supported operating system. Your computer disconnects the camera while transferring files The file transfer may be interrupted by static electricity.
Appendix Camera specifications Image Sensor Display Type CMOS Sensor size 23.5 X 15.7 mm Effective pixels Approx. 20.3 mega-pixels Total pixels Approx. 21.6 mega-pixels Color filter RGB primary color filter Lens Mount Type Samsung NX Mount Available lens Samsung lenses Image Stabilization Type Lens shift (depends on lens) Mode Off/Mode 1/Mode 2 Distortion Correct Type TFT-LCD with Touch Panel (C-type Touch Control Enabled) Size 3.7" (Approx. 93.
Appendix > Camera specifications Shutter Drive Mode Type Electronically controlled vertical-run focal plane shutter Speed • Auto: 1/4,000–30 sec. • Manual: 1/4,000–30 sec.
Appendix > Camera specifications External flash Optional Samsung external flashes: SEF42A, SEF220A Sync terminal Hot-shoe Smart mode Beauty Face, Best Face, Landscape, Macro, Action Freeze, Rich Tones, Panorama, Waterfall, Silhouette, Sunset, Night, Fireworks, Light Trace, Creative Shot Smart Filter Vignetting, Miniature, Colored Pencil, Watercolor, Wash drawing, Oil Sketch, Ink Sketch, Acryl, Negative, Red, Green, Blue, Yellow White Balance Mode Micro adjustment Auto WB, Daylight, Cloudy, Fluor
Appendix > Camera specifications Video Playback Type Single image, Thumbnails (15/28), Slide show, Movie Program, Aperture Priority, Shutter Priority, Manual Edit Smart Filter, Red-eye Fix, Backlight, Resize, Rotate, Face Retouch, Brightness, Contrast Movie clip Audio on/off (Shooting time: Max.
Appendix > Camera specifications Wireless network Power Source Type IEEE 802.11b/g/n Function MobileLink, Remote Viewfinder, Auto Backup, Email, SNS & Cloud, Samsung Link, AutoShare, Wi-Fi Direct NFC Type Rechargeable battery: BP1130 (1,130 mAh) * The power source may differ depending on your region. Dimensions (W X H X D) 119 X 64.5 X 35.7 mm (without protrusions) Weight Yes 228 g (without battery and memory card) Interface Operating Temperature Digital output USB 2.
Appendix Glossary AP (Access Point) AEL/AFL (Auto Exposure Lock/Auto Focus Lock) An access point is a device that allows wireless devices to connect to a wired network. These features help you lock the exposure or focus on which you want to focus or calculate the exposure. Ad-Hoc network AF (Auto Focus) An ad-hoc network is a temporary connection for sharing files or an internet connection and between computers and devices. A system that automatically focuses the camera lens on the subject.
Appendix > Glossary Camera shake (Blur) Composition If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the flash, or using a faster shutter speed. Alternatively, use a tripod or the OIS function to stabilize the camera. Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition.
Appendix > Glossary EV (Exposure Value) Flash All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. A speed light that helps to create adequate exposure in low-light conditions. EV Compensation Focal length This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. The distance from the middle of the lens to its focal point (in millimeters).
Appendix > Glossary Image sensor Metering The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Chargecoupled Device) and CMOS (Complementary Metal Oxide Semiconductor). The metering refers to the way in which the camera measures the quantity of light to set the exposure.
Appendix > Glossary Noise PAL (Phase Alternate Line) Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place. A video color encoding standard used in numerous countries throughout Africa, Asia, Europe, and the Middle East. Quality NFC (Near Field Communication) NFC is a set of standards for radio communication at very close proximity.
Appendix > Glossary Shutter speed White Balance (Color balance) Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion.
Appendix Optional accessories Lens Lens SAMSUNG 18-55 mm F3.5-5.6 OIS III SAMSUNG 20-50 mm F3.5-5.6 ED II SAMSUNG 85 mm F1.4 ED SSA SAMSUNG 12-24 mm F4-5.6 ED SAMSUNG 16 mm F2.4 SAMSUNG 20 mm F2.8 SAMSUNG 45 mm F1.8 SAMSUNG 45 mm F1.8 [T6] 2D/3D External flash SAMSUNG 30 mm F2 SAMSUNG 50-200 mm F4-5.6 ED OIS III SEF42A SEF220A GPS GPS10 SAMSUNG 60 mm F2.8 Macro ED OIS SSA SAMSUNG 18-200 mm F3.5-6.
Appendix > Optional accessories Shutter release (micro USB type) Microphone SR2NX02 EM10 Rechargeable battery Battery charger BP1130 BC3NX01 Camera bag Camera case USB cable HDMI cable Strap • These illustrations may differ from your actual items. Refer to the user manuals of these optional accessories for details. • Use only Samsung-approved accessories. Samsung is not responsible for damage caused by using another manufacturer’s accessories.
Appendix Index A Adobe Photoshop Lightroom 167 Aperture 15, 19 Camera specifications 184 Charging 34 Color space 148 Fader 107 Files Deleting 113 Photo type 75 Protecting 112 Video type 106 Auto Backup 133 Auto focus 82 D Date & Time 153 B Depth of Field (DOF) 16, 21 Battery Digital Print Order Format (DPOF) 115 Caution 177 Charging 34 Insert 33 i-Function 67 F Flash Bounce photography 26 Flash options 101 Guide number 25 Intensity 102 DIRECT LINK 31 Display brightness 152 F-number 15 Best F
Appendix > Index Shooting modes O R One touch shot 89 Red-eye effect Playback mode 121 Shooting mode 102 Optical Image Stabilization (OIS) 93 Optional accessories Attach the GPS module 53 Connect the flash 51 Flash layout 50 GPS module layout 53 P Aperture Priority 62 Auto 55 Custom 65 Manual 64 Program 61 Recording 66 Shutter Priority 63 Smart 57 Remote Viewfinder 131 Resolution Playback mode 119 Shooting mode (Movie) 106 Shooting mode (Photo) 74 Retouching faces 121 Slide show 114 Rotating 119
Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Correct disposal of batteries in this product (Applicable in countries with separate collection systems) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix FCC notice Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. No.: ESD-1307120C 28938/SDPPI/2013 1760 Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Please refer to the warranty that came with your product or visit our website www.samsung.com for after-sales service or inquiries.
