Manualshelf

User manual

ManualsBrandsSamsung ManualsLCD TVs2033M
31323334353637383940
Using the Product 3-4
Change PIN You can change your personal ID number that is required to set up the TV.
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit
PIN number.
• The default PIN number of a new TV set is ‘0-0-0-0’.
• If you forget the PIN code, press the remote control buttons in the following sequence,
which resets the PIN to ‘0-0-0-0’: <POWER> (Off), <MUTE>, 8, 2, 4, <POWER> (On).
Caption
(On-Screen Text Mes-
sages)
• <Caption> / <Mode> / <Channel> / <Field>
The Caption function operates when watching regular analog channels or when you have an
analog external component (such as a VCR) connected.
• The Caption feature doesn’t work in <Component>, <PC>, or <HDMI> modes.
• Depending on the particular broadcast, it might be necessary to alter the settings to
<Channel> and <Field>.
• Different channels and fields display different information: Field 2 carries additional
information that supplements the information in Field 1. (For example, Channel 1 may
have subtitles in English, while Channel 2 has subtitles in Spanish).
Melody A melody sound can be set to come on when the monitor is powered On or Off.
• <Off> - <Low> - <Medium> - <High>
The <Melody> does not play.
• When no sound is output from the TV because the [MUTE] button has been pressed.
• When no sound is output from the TV because the volume has been reduced to minimum
with the volume [-] button.
• When the TV is turned off by <Sleep Timer> function.
Light Level Use to adjust the light level i.e., the brightness of the light.
• <1> ~ <10>
The higher the number, the brighter the light of the LED emits.
Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption. When watching
TV at night, set the <Energy Saving> mode option to <High> to reduce eye fatigue as well as power
consumption.
• <Off> - <Low> - <Medium> - < High> - <Auto>
Press the [TOOLS] button to display the Tools menu. You can also set the <Energy Saving> by
selecting <Tools>→<Energy Saving>.
MENU DESCRIPTION