_E210T240Tcov.
1_E210T240Tcov.fm Page 2 Friday, July 6, 2001 11:58 AM For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) in control panel of computer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. • Resolution: 21” 1600 x 1200 • Vertical frequency (refresh rate): 60 Hz 24” 1920 x 1200 2.
Portu- Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting up Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting up an Ergonomic Workstation . . . . . . . . .
3_E210T240Tsaf.fm Page 2 Friday, July 6, 2001 11:27 AM Safety Instructions 1 2 3 4 5 Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD) monitor; doing so may create the danger of electric shock. To avoid electric shock, never touch the inside of the LCD monitor.
4_E210T240T3p.fm Page 3 Friday, August 10, 2001 1:38 PM Manual Remote Controller V1 V2 SOURCE Monitor DC Adapter RCA Cable 15-pin D-Sub Signal Cable S-VHS Cable AUTO EXIT MENU Speaker (option) DVI-D signal cable Italiano Batteries (AAA x 2) PIP Français Warranty Card (not available in all locations) Deutsch Power Cord English 3 Portuguese Installation CD Español Please make sure the following items are included with your monitor. If any items are missing, contact your dealer.
4_E210T240T3p.fm Page 4 Friday, August 10, 2001 1:38 PM Setting up Your LCD Monitor Setting up an Ergonomic Workstation Consider the advice given below before you install your monitor. Monitor location Choose a position that exposes your monitor to the least reflection from lights or windows, usually at a right angle to any window. Workstation height Place your LCD monitor so that the top of the screen is slightly below your eye level when you are comfortably seated.
4_E210T240T3p.fm Page 5 Friday, August 10, 2001 1:38 PM English Setting up Your LCD Monitor Connecting Your LCD Monitor PC 1 2 3 4 5 connector 1 on the back of the monitor. Connect the Analog video signal cable from PC to 2 . Connect RCA cable from external video devices such as VCR, DVD, and Camcorder to 4 . Connect S-Video cable from external video devices such as VCR, DVD, and Camcorder to 5 . If you have a DVI compliant video graphics adaptor, connect DVI video cable from PC to 3 .
4_E210T240T3p.fm Page 6 Friday, August 10, 2001 1:38 PM Setting up Your LCD Monitor If you are experiencing the above, then please follow the steps given below to solve the problem. 1.Touch the “MENU” button to bring up OSD window. 2.Select “Hz” menu. 3.Press “MENU” button seven times while keeping “Hz” menu highlighted. 4.The monitor’s displayed mode will be changed from UXGA mode to WUXGA mode, or from WUXGA mode to UXGA mode depending on the current mode.
4_E210T240T3p.fm Page 7 Friday, August 10, 2001 1:38 PM CHECK SIGNAL CABLE Analog* Figure 5. Monitor self-test screen * It shows signal source is not connected with one of Analog, Digital, Video or S-Video. This box also appears during normal operation if the video cable becomes disconnected or damaged. 4 Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
4_E210T240T3p.fm Page 8 Friday, August 10, 2001 1:38 PM Adjusting Your LCD Monitor User Controls Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor. While you use these buttons to adjust the controls, an OSD shows you their numeric values as they change. * SOURCE PIP AUTO EXIT MENU VIDEO PC * 21" : SyncMaster 210T Figure 6. User control locations No.
4_E210T240T3p.fm Page 9 Friday, August 10, 2001 1:38 PM ■ 7 ■ Moves the selector right or left on the OSD. Increases or decreases the Brightness. Increases or decreases the values of the selected function. Automatic Save Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing other buttons, the monitor automatically saves any adjustment you have made. These changes are saved into a user area in the monitor.
4_E210T240T3p.fm Page 10 Friday, August 10, 2001 1:38 PM Adjusting Your LCD Monitor Function AUTO Description ■ ■ EXIT Use this button to optimize image quality automatically. “Auto adjustment” feature affects following parameters: Fine, Coarse, and Image Position. Exits from menus and sub-menus. Exits from the OSD menu. Turns the PIP off. ■ ■ ■ –/+ ■ Use this button to change Brightness. When OSD is active, use “–” and “+” buttons to navigate through menus.
4_E210T240T3p.fm Page 11 Friday, August 10, 2001 1:38 PM English Adjusting Your LCD Monitor On Screen Display(OSD) Setting bar - + Tool Tip 25 Press Menu Key Figure 7. On Screen Display(OSD) Accessing the menu system NOTE: The numeric value indicator is provided as a point of reference only and has nothing to do with a real measurement. 6 Push the Exit button a couple of times to return to the main menu to select another function or to exit from the OSD.
4_E210T240T3p.fm Page 12 Friday, August 10, 2001 1:38 PM Adjusting Your LCD Monitor OSD functions and adjustment Table 1. Screen controls Menus and Sub-menus Icon Function Descriptions – + Brightness Changes the overall light intensity of the images being displayed. Contrast Changes the ratio of light intensity between the brightest white and the darkest black. If "CONTRAST" ratio is set too high, color saturation occurs resulting loss of details. It work only with Analog source.
4_E210T240T3p.fm Page 13 Friday, August 10, 2001 1:38 PM Fine Coarse H-Position Although "Auto Adjustment" automatically finds the optimum values of FINE and COARSE parameters as well as image position, it may be necessary for you to adjust those parameters manually. It is recommended for you to use "Auto Adjustment" first. If the adjustment results are not satisfactory, then use COARSE and FINE adjustment features to get the best adjustment results.
4_E210T240T3p.fm Page 14 Friday, August 10, 2001 1:38 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) Menus and Sub-menus Icon Image Size Function Descriptions – + Aspect ratio is the proportion of a vertical versus a horizontal resolution, and it varies depending on the input video resolution. For example, 640x480, 800x600, and 1024x768 have the aspect ratio of 4:3, and 1280x1024 has the aspect ratio of 5:4.
4_E210T240T3p.fm Page 15 Friday, August 10, 2001 1:38 PM English Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) ■ ■ ■ ■ Zoom ■ ■ ■ ■ ■ Pan ■ ■ Performs Digital Zoom. Any part of an image can be magnified by ZOOM feature and the center of magnification can be arbitrarily changed by PAN feature. Magnifies an image It work only with PC source. (Not working with UXGA & WUXGA mode.
4_E210T240T3p.fm Page 16 Friday, August 10, 2001 1:38 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) Menus and Sub-menus Icon PIP(Picture-inPicture) Function Descriptions – ■ ■ ■ ■ ■ ■ Size ■ Position + Shows a small sub-window superimposed on Video or PC. (Refer to page 9.) When Video is a full screen video source, then PC will be appeared in a small window. Likewise, when PC is a full screen video source, then Video will be appeared in a small window.
4_E210T240T3p.fm Page 17 Friday, August 10, 2001 1:38 PM English Adjusting Your LCD Monitor Table 1.
4_E210T240T3p.fm Page 18 Friday, August 10, 2001 1:38 PM Adjusting Your LCD Monitor Table 1. Screen controls (Continued ) Icon Menus and Sub-menus Information Function Descriptions – ■ ■ ■ ■ ■ ■ + Shows the information of the current video signal. The information includes the following Video Signal Type: Analog/Digital Sync. Types and frequencies with polarities Resolution Example Analog H + 74.8 V + 60.
4_E210T240T3p.fm Page 19 Friday, August 10, 2001 1:38 PM English Adjusting Your LCD Monitor By Remote-Control Menu Key Exit Key Auto Adjustment PIP Off PIP On, PIP Picture Swap Change PIP Size Zoom In PBP Enable (PBP disable: Exit) Deutsch Display Current State (Right Up Corner Message) Français Input Source Change.
4_E210T240T3p.fm Page 20 Friday, August 10, 2001 1:38 PM Appendix PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. Power Saver operates with a VESA DPMS compliant video card installed in your computer.
4_E210T240T3p.fm Page 21 Friday, August 10, 2001 1:38 PM Troubleshooting If you have a problem setting up or using your LCD monitor, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. English Appendix ■ Ensure that the power cord is firmly connected and the LCD monitor is on. Connecting your LCD monitor, page 5. “ Check Signal Cable” message.
4_E210T240T3p.fm Page 22 Friday, August 10, 2001 1:38 PM Appendix Table 3. Troubleshooting – Image (Continued ) What you see... Suggested Actions Screen is blank and power indicator light is steady amber or blinks every 0.5 or 1 seconds. ■ Image is not stable and may appear to vibrate. Reference The monitor is using its power management system. Move the computer’s mouse or press a key on the keyboard. Power Saver, page 20.
4_E210T240T3p.fm Page 23 Friday, August 10, 2001 1:38 PM English Appendix Specifications Table 4. Technical and environmental specifications Panel Size Display Size Type Pixel pitch Viewing Angle 21.3” Diagonal 432 (H) x 324 (V) mm a-si TFT Active matrix 0.27 (H) x 0.27 (V) mm 80˚/80˚/80˚/80˚ (L/R/U/D) Typ.
4_E210T240T3p.fm Page 24 Friday, August 10, 2001 1:38 PM Appendix Pin Assignments Table 5.
4_E210T240T3p.fm Page 25 Friday, August 10, 2001 1:38 PM HDTV Format VGA SVGA XGA Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) 1280 x 720p 44.955 59.94 74.176 +/–,+/– 1920 x 1080i 33.716 59.94i 74.176 +/–,+/– 720 x 400 31.469 70.087 28.322 –/+ 640 x 480 31.469 59.940 25.175 –/– 640 x 480 37.500 75.000 31.500 –/– 640 x 480 43.269 85.008 36.000 –/– 800 x 600 46.875 75.000 49.500 +/+ 800 x 600 53.674 85.
5_E210T240T26p.fm Page 26 Friday, July 6, 2001 11:27 AM Appendix Changing the Base Removing the base 1 2 3 Turn off your monitor and unplug its power cord. 4 Remove the four screws and then lift off the stand. Lay the LCD monitor face-down on a flat, soft surface. Remove the six screws and then remove the hinge cover.
5_E210T240T26p.fm Page 27 Friday, July 6, 2001 11:27 AM Appendix Attaching the base NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad. Rear cover mounting pad 1 Mounting interface pad Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other base.
6_E210T240Tix.
User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
8_E210T240Tbk.fm Page 1 Monday, July 9, 2001 U.S.A.: Samsung Electronics America (SEA) 400 Valley Road, Suite 201 Mt. Arlington, NJ 07856 Tel.: 1-800-SAMSUNG (1-800-726-7864) CANADA: Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 Tel.: 1-800-SAMSUNG (1-800-726-7864) Fax.: (905) 542-1199 GERMANY: Samsung Electronics GmbH Samsung-Haus, Am Kronberger Hang 6 65824 Schwalbach/Ts. Tel. 49 (0180) 5121213 * Fax. 49 (0180) 5121214 * *DM 0,24/Min.