Specifications

4-3-9 RF AGC Adjustment

Set the AGC data to 23 (Factory Mode).

4-3-10 Sub-Color Adjustment

Set data to (Factory Mode).

4-3-11 Geometry Adjustment

SC →VS→VSL→HS

1. Input a lion head pattern (in the PAL channel).

2. Set the SC (S-Correction) as follows :

10(21” Flat) ,9 (21”), 9 (20”), 0 (14”)

and VA 40 so that the lion

head circle becomes oval.

3. Adjust with VS (Vertical shift) so that the top

margin of the picture is 4.

Fig. 4-7

4. Adjust with VSL (Vertical-Slope) so that the

bottom margin of the picture is 4.

Fig. 4-8

5. Adjust with HS (Horizontal Shift) so that the

lion-head pattern and CRT centers are aligned.

Fig. 4-9

6. Adjust HS (using the width coil) so that the

left and right margins of the picture are 5.

Alignment and Adjustments

4-8 Samsung Electronics

PSR

NSR