User manual SyncMaster S22C650D S22C650K S23C650D S23C650K S24C650PL S27C650D The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE 7 Copyright 7 Icons used in this manual 8 Cleaning 8 9 9 Cleaning Securing the Installation Space Precautions for storage 10 Safety Precautions 10 11 12 14 Symbols Electricity and Safety Installation and Safety Operation and Safety 18 Correct posture to use the product 19 Checking the Contents 19 20 Removing the Packaging Checking the Components 21 Parts 21 23 25 Frontal Buttons Reverse Side
Table Of Contents SCREEN SETUP CONFIGURING TINT 31 Connecting and Using a PC 31 37 38 39 Connecting to a PC Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC 43 Brightness 43 Configuring Brightness 44 Contrast 44 Configuring Contrast 45 Sharpness 45 Configuring Sharpness 46 SAMSUNG MAGIC Bright 46 Configuring SAMSUNG MAGIC Bright 48 Image Size 48 Changing the Image Size 50 HDMI Black Level 50 Configuring the HDMI Black Level Settings 51 Respons
Table Of Contents RESIZING OR RELOCATING THE SCREEN SETUP AND RESET 56 Green 56 Configuring Green 57 Blue 57 Configuring Blue 58 Color Tone 58 Configuring the Color Tone Settings 59 Gamma 59 Configuring Gamma 60 Language 60 Changing the Language 61 Menu H-Position & Menu V-Position 61 Configuring Menu H-Position & Menu VPosition 62 Display Time 62 Configuring Display Time 63 Transparency 63 Changing Transparency 64 Reset 64 Initializing Settings (Reset) 65 Eco Saving
Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE 70 Key Repeat Time 70 Configuring Key Repeat Time 71 Source Detection 71 Configuring Source Detection 72 Customized Key 72 Configuring Customized Key 73 INFORMATION 73 Displaying INFORMATION 74 Configuring Brightness and Contrast in the Initial Screen 75 Configuring Volume in the Initial Screen 76 Magic Tune 76 76 77 What is MagicTune? Installing the Software Removing the Software 78 Multi
Table Of Contents SPECIFICATIONS APPENDIX 88 General 92 PowerSaver 93 Standard Signal Mode Table 100 Contact SAMSUNG WORLD WIDE 106 Responsibility for the Pay Service (Cost to Customers) 106 106 106 Not a product defect A Product damage caused by customer's fault Others 107 Correct Disposal 107 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 108 Terminology Table Of Contents 6
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3. Wipe the monitor screen using a clean, soft and dry cloth.
Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product. The exterior may differ depending on the product. 3.93 inches(10 cm) 3.93 inches(10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.
Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not unplug the power cord when the product is in use. The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. ! An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed. If any problem occurs in the product, unplug the power cable to completely cut the power to the product.
Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. ! An electric shock or fire may result.
Before Using the Product Put down the product carefully. The product may fall and break or cause a personal injury. ! SAMSUNG ! Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.
Before Using the Product Do not put a heavy object, toy, or sweets on top of the product. The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury. During a lightning or thunderstorm, power off the product and remove the power cable. ! An electric shock or fire may result. Do not drop objects on the product or apply impact. An electric shock or fire may result. ! Do not move the product by pulling the power cord or any cable.
Before Using the Product 100 Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (page 100). Product failure, an electric shock or fire may result.
Before Using the Product Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. Store the small accessories used with the product out of reach of children. ! Exercise caution when adjusting the product angle or stand height. ! Otherwise, children's fingers or hands may become stuck and injured.
Before Using the Product Correct posture to use the product Use the product in the correct posture as follows. Straighten your back. Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. Keep your eyes directly in front of the screen. Adjust the angle so light does not reflect on the screen. Keep your forearms perpendicular to your upper arms and level with the back of your hands. Keep your elbows at about a right angle.
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam from the product. 3 Check the components and remove the styrofoam and plastic bag. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown.
1 1.2 Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Key Guide SAMSUNG MAGIC BRIGHT AUTO VO VOL L SAMSUNG MAGIC BRIGHT VOL AUTO SAMSUNG MAGIC BRIGHT Icons Description MENU AUTO Open or close the onscreen display (OSD) menu, or return to the parent menu.
1 Preparations Icons Description Use this button to control the brightness and contrast of the screen. When OSD is not on the screen,push the button to adjust the Volume in Analog mode if a stereo cable is connected to the [IN] port. When OSD is not on the screen,push the button to adjust the Volume in HDMI/DisplayPort mode. Applicable to the models that have speakers only. Confirm a menu selection.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. DP IN RGB IN DVI IN POWER IN HDMI IN RGB IN AUDIO IN/OUT POWER IN OUT IN DP IN HDMI IN RGB IN POWER IN AUDIO IN/OUT OUT IN Port Ports Connect the power cord for your monitor to the POWER IN port on the back of the product. Connect to a PC using the D-SUB cable. Connect to a PC using the DVI cable.
1 Preparations Port Ports Connects to a PC using a DP cable. The [DP IN] terminal is supplied for the DP-dedicated models only. Connect to an audio-input source using an audio cable. IN Applicable to the models that have speakers only. Connect to an audio output device such as headphones. OUT Applicable to the models that have speakers only. Connect the port of the monitor and the USB port of the computer with the USB cable. Applicable to the stand models that have USB ports only.
1 Preparations 1.2.3 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Ports Connect to a USB device. Applicable to the stand models that have USB ports only.
1 1.3 Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Do not remove the fixing pin until Insert the stand base into the you are finished attaching the stand in the direction of the stand. arrow. Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base. After installing the stand, place the product upright.
1 Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 22"-24" 27" 4 0(±5mm) ~ 130mm(±5mm) To adjust the height, remove the fixing pin. The monitor tilt and height can be adjusted. Hold the top center of the product and adjust the height carefully. 1.3.3 Rotating the Monitor You can rotate your monitor as shown below.
1 Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion. Unfasten the screw from the back of the product. Lift and detach the stand.
1 Preparations Notes Using a screw longer than the standard length can damage the internal components of the product. The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause personal injury.
2 2.1 Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. 2.2 Check the types of ports at the back of the product you want to connect.
2 2.3 Connecting and Using a Source Device Connecting and Using a PC 2.3.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection Using the D-SUB Cable (Analog Type) Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. RGB IN RGB 1 2 IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2 Connecting and Using a Source Device Connection Using an DP Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. DP IN DP IN 1 2 Connect the DP cable to the [DP IN] port on the back of the product and the DP port on the PC. Press [ ] to change the input source to DisplayPort. The [DP IN] terminal is supplied for the DP-dedicated models only.
2 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN HDMI 1 IN Connect the HDMI-DVI cable to the [HDMI IN] port on the back of the product and the DVI port on the PC. 2 Press the [ ] button to change the input source to HDMI. The [HDMI IN] terminal is supplied for the HDMI-dedicated models only.
2 Connecting and Using a Source Device Connecting USB Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. Applicable to the stand models that have USB ports only. You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connecting them to the The USB port of the monitor supports High-Speed Certified USB 2.0.
2 Connecting and Using a Source Device Make sure to use the USB cable supplied with this monitor to connect the monitor's and your computer's USB port. B port B USB A 2 3 Connect the A port of the USB monitor and a USB device with the USB cable. The use procedures are as the same as those for using an external device connecting to the PC. You can connect and use a keyboard and mouse. You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.
2 Connecting and Using a Source Device Changing the sound settings on Windows Control Panel → Audio → Speaker → Speaker Setup 1 2 3 4 2 Connecting and Using a Source Device 36
2 Connecting and Using a Source Device 2.3.2 Driver Installation You can set the optimum resolution and frequency for this product by installing the corresponding drivers. An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file. 1 2 3 4 Insert the user manual CD provided with the product into the CD-ROM drive.
2 Connecting and Using a Source Device 2.3.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on the product and change the resolution on your PC to the optimum setting. The optimal resolution for this monitor is as follows: **** x **** **Hz Use the above settings to set the resolution on your PC.
2 Connecting and Using a Source Device 2.3.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel 1 Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution and change the resolution.
3 3.1 Screen Setup Configure the screen settings such as brightness. Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. SAMSUNG This menu is not available when MAGIC Bright is set to Dynamic Contrast mode. This menu is unavailable when Eco Saving is set. 3.1.1 Configuring Brightness 1 Press any button on the front of the product to display the Key Guide.
3 3.2 Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. 3.2.1 Configuring Contrast 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.3 Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. SAMSUNG This menu is not available when MAGIC Bright is in Cinema or Dynamic Contrast mode. 3.3.1 Configuring Sharpness 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.4 Screen Setup SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used. This menu is unavailable when Eco Saving is set. You can customize the brightness to suit your preferences. 3.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 Screen Setup PICTURE PICTURE Brightness Brightness Contrast Contrast Sharpness Sharpness SAMSUNG MAGIC Bright Dynamic ࢽ࣏ ࡈی SAMSUNG MAGIC Bright Dynamic ࢽ࣏ ࡈی Image Size ଥࢿ Movie Image Size ଥࢿ Movie Response Time H-Position Standard Custom HDMI Black Level Response Time )DVWHU Standard Custom AUTO (S22C650K/S23C650K/S24C650PL) 50 AUTO (S22C650D/S23C650D/S27C650D) SAMSUNG When the external input is
3 3.5 Screen Setup Image Size Change the picture size. 3.5.1 Changing the Image Size 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Image Size and press [ ] on the product. ] on the product. The following screen will appear.
3 Screen Setup 4 5 Press [ This can only be set when the external input is connected through HDMI/DVI/DP and PC/AV Mode is set to AV. ] to move to the option you want and press [ ]. The selected option will be applied.
3 3.6 Screen Setup HDMI Black Level If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/ color degradation, black level, etc.) may occur, depending on the connected source device. In such case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded picture quality using HDMI Black Level. This function is only available in HDMI mode. 3.6.
3 3.7 Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time to Standard or Faster when you are not viewing a movie. The functions available on the monitor may vary depending on the model. Refer to the actual product. 3.7.1 Configuring Response Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
3 3.8 Screen Setup H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is available in Analog mode. This menu is only available when Image Size is set to Screen Fit in AV Mode. When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally ,select Screen Fit to adjust horizontal position in 0-6 levels. 3.8.
3 3.9 Screen Setup Coarse Adjust the screen frequency. This menu is available in Analog mode only. 3.9.1 Adjusting Coarse 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Coarse and press [ ] on the product. ] on the product. The following screen will appear.
3 Screen Setup 3.10 Fine Fine-adjust the screen to obtain a vivid picture. This menu is available in Analog mode only. 3.10.1 Adjusting Fine 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to PICTURE and press [ Press [ ] to move to Fine and press [ PICTURE ] on the product. The following screen will appear.
4 Configuring Tint SAMSUNG Adjust the tint of the screen. This menu is not available when MAGIC Bright is set to Cinema or Dynamic Contrast mode. 4.1 Red Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.1.1 Configuring Red 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
4 4.2 Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.2.1 Configuring Green 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Green and press [ ] on the product. ] on the product. The following screen will appear.
4 4.3 Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. 4.3.1 Configuring Blue 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ Press [ ] to move to Blue and press [ ] on the product. ] on the product. The following screen will appear.
4 4.4 Configuring Tint Color Tone Adjust the general color tone of the picture. 4.4.1 Configuring the Color Tone Settings 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Color Tone and press [ ] on the product. The following screen will appear.
4 4.5 Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.
5 5.1 Resizing or Relocating the Screen Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 5.1.1 Changing the Language 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Language and press [ ] on the product.
5 5.2 Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.2.1 Configuring Menu H-Position & Menu V-Position 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ ] on the product.
5 5.3 Resizing or Relocating the Screen Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 5.3.1 Configuring Display Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
5 5.4 Resizing or Relocating the Screen Transparency Set the transparency for the menu windows: 5.4.1 Changing Transparency 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to MENU SETTINGS and press [ Press [ ] to move to Transparency and press [ ] on the product. ] on the product. The following screen will appear.
6 6.1 Setup and Reset Reset Return all the settings for the product to the default factory settings. 6.1.1 Initializing Settings (Reset) 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Reset and press [ ] on the product. ] on the product. The following screen will appear.
6 6.2 Setup and Reset Eco Saving The Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. SAMSUNG This menu is not available when MAGIC Bright is in Dynamic Contrast mode. 6.2.1 Configuring Eco Saving 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.3 Setup and Reset Off Timer You can set the product to automatically turn off. 6.3.1 Configuring Off Timer 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Off Timer and press [ ] on the product. ] on the product. The following screen will appear.
6 6.4 Setup and Reset Turn Off After The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is available only when Off Timer is set to On. 6.4.1 Configuring Turn Off After 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen.
6 6.5 Setup and Reset PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. This function does not support Analog mode. Supplied for the wide models only such as 16:9 or 16:10. If the monitor (when set to DVI,HDMI or DP) is in power saving mode or is displaying the message Check Signal Cable, press the MENU button to display the On Screen Display (OSD). You can select PC or AV. 6.5.
6 Setup and Reset PC/AV Mode +'0, PC/AV Mode 3& $9 '9, 3& PC AV DVI DisplayPort ೳ AUTO (S22C650K/S23C650K) AUTO (S22C650D/S23C650D/S27C650D) PC/AV Mode HDMI DisplayPort PC AV DVI PC AUTO (S24C650PL) 4 5 Press [ ] to move to the option you want and press [ ]. The selected option will be applied.
6 6.6 Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.6.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Key Repeat Time and press [ ] on the product. ] on the product. The following screen will appear.
6 6.7 Setup and Reset Source Detection You can activate Source Detection. 6.7.1 Configuring Source Detection 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ Press [ ] to move to Source Detection and press [ ] on the product. ] on the product. The following screen will appear.
6 6.8 Setup and Reset Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 3 Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product. The following screen will appear.
7 7.1 INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION 1 Press any button on the front of the product to display the Key Guide. Next, press [ MENU ] to display the corresponding menu screen. 2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear.
7 7.2 INFORMATION Menu and Others Configuring Brightness and Contrast in the Initial Screen Adjust the Brightness or Contrast setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). 1 Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ]. The following screen will appear. Brightness 100 Contrast 75 EXIT 2 3 Press the [ ] button to alternate between the Brightness and Contrast settings.
7 7.3 INFORMATION Menu and Others Configuring Volume in the Initial Screen Adjust the Volume by pressing the [ 1 ] button when the Key Guide is displayed. Press any button on the front of the product (when no menu screen is displayed) to display the Key guide. Next, press [ ]. The following screen will appear. Volume 51 EXIT 2 Adjust the Volume setting using the [ ] buttons. Applicable to the models that have speakers only.
8 8.1 Installing the Software Magic Tune 8.1.1 What is MagicTune? MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor functions and easy-to-understand guidelines. You can adjust the product with the mouse and the keyboard without using the operating buttons of the product. 8.1.2 Installing the Software 1 2 Insert the installation CD into the CD-ROM drive. Select the MagicTune setup program.
8 Installing the Software 8.1.3 Removing the Software You can only remove MagicTune™ through [Add or Remove Programs] in Windows. To remove MagicTune™, complete the following steps. 1 Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2 3 4 5 6 Double-click the [Add or Remove Programs] icon in the Control Panel. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
8 8.2 Installing the Software MultiScreen MultiScreen MultiScreen enables users to use the monitor by partitioning multiple sections. 8.2.1 Installing the Software 1 2 Insert the installation CD into the [CD-ROM drive]. Select the "MultiScreen" setup program. If the pop-up screen for the software installation does not appear on the main screen, find and double-click the "MultiScreen" setup file on the [CD-ROM]. 3 4 When the Installation Wizard appears, click [Next].
8 Installing the Software 8.2.2 Removing the Software Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs]. Select "MultiScreen" from the program list and click the [Add/Delete] button.
8 8.3 Installing the Software MagicRotation The MagicRotation Software from Samsung Electronics, Inc. provides the user with a rotation feature (0, 90, 180, 270 orientation) that facilitates the optimum utilization of computer display screen, better viewing and improved user productivity. 8.3.1 Installing the Software 1 2 Insert the installation CD into the [CD-ROM drive]. Select the "MagicRotation" setup program.
8 Installing the Software 3 User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientation mode selected (90, 180, 270). e.g. 3D games 4 DOS based applications in Full Screen Mode will not function as per the orientation mode selected (90, 180, 270). 5 6 7 Dual is not supported in Windows™ 98, ME, NT 4.0. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).
8 Installing the Software 8.3.2 Removing the Software You can only remove MagicRotation through [Add or Remove Programs] in Windows. To remove "MagicRotation", complete the following steps. 1 Click [Start] select [Settings], and select [Control Panel] from the menu. For Windows XP, click [Start], and select [Control Panel] from the menu. 2 3 4 5 6 Double-click the [Add or Remove Programs] icon in the Control Panel. In the [Add/Remove] window, find and select MagicRotation so that it is highlighted.
9 9.1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC, perform a self-diagnosis test.
9 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 93). The images on the screen look distorted. Check the cable connection to the product (Refer to "2.3 Connecting and Using a PC") The screen is not clear. The screen is blurry.
9 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
9 9.2 Troubleshooting Guide Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. Windows XP: Go to Control Panel Themes Display Settings Appearance and Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Go to Control Panel Settings Advanced Display Monitor, and adjust Refresh rate under Monitor settings.
9 Troubleshooting Guide Question How can I change the resolution? Answer Windows XP: Go to Control Panel Themes Display Appearance and Settings, and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings, and adjust the resolution. Windows Vista: Go to Control Panel Personalization Personalize Appearance and Display Settings, and adjust the resolution.
10 Specifications 10.1 General Model Name Panel S22C650D S22C650K S23C650D Size 21.5 Inches (54 cm) 23 Inches (58 cm) Display area 476.64 mm (H) x 268.11 mm (V) 509.76 mm (H) x 286.74 mm (V) Pixel Pitch 0.24825 mm (H) x 0.24825 mm (V) 0.2655 mm (H) x 0.2655 mm (V) Horizontal Frequency 30 ~ 81 kHz Vertical Frequency 56 ~ 75 Hz Synchronization Display Color 16.
10 Specifications Model Name Without Stand Dimensions (W x H x D) / Weight With Stand S22C650D S22C650K S23C650D 19.9 x 11.9 x 2.2 Inches 19.9 x 11.9 x 2.2 Inches 21.4 x 12.7 x 2.2 Inches 504.3 x 301.9 x 55.45 mm 504.3 x 301.9 x 55.45 mm 542.9 x 321.4 x 55.4 mm MIN:19.9 x 14.19 x 8.3 Inches / 10.47 lbs MIN:19.9 x 13.99 x 8.3 Inches / 10.47 lbs MIN:21.4 x 13.77 x 8.8 Inches / 12.02 lbs 504.3 x 360.35 x 210 mm / 4.75 kg 504.3 x 355.35 x 210 mm / 4.75 kg 542.9 x 349.65 x 224.0 mm / 5.
10 Specifications Model Name Panel S23C650K S24C650PL S27C650D Size 23 Inches (58 cm) 23.6 Inches (59 cm) 27 Inches (68 cm) Display area 509.76 mm (H) x 286.74 mm (V) 521.28 mm (H) x 293.22 mm (V) 597.6 mm (H) x 336.15 mm (V) Pixel Pitch 0.2655 mm (H) x 0.2655 mm (V) 0.2715 mm (H) x 0.2715 mm (V) 0.31125 mm (H) x 0.
10 Specifications Model Name Without Stand Dimensions (W x H x D) / Weight With Stand S23C650K S24C650PL S27C650D 21.4 x 12.7 x 2.2 Inches 21.8 x 13.0 x 2.18 Inches 25.2 x 14.9 x 2.2 Inches 542.9 x 321.4 x 55.4 mm 554.6 x 330.5 x 55.45 mm 639 x 378.1 x 56.7 mm MIN:21.4 x 13.57 x 8.8 Inches / 12.02 lbs MIN:21.8 x 14.07 x 8.8 Inches / 12.02 lbs MIN:25.2 x 15.9 x 8.8 Inches / 13.67 lbs 542.9 x 344.65 x 224.0 mm / 5.45 kg 554.6 x 357.35 x 224.0 mm / 5.45 kg 639 x 402.8 x 224 mm / 6.
10 Specifications 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-saving mode functions only when the product is connected to a PC that has a power-saving function.
10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for the screen size of your product. Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
10 Specifications Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.
10 Specifications S22C650K Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S23C650D Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S23C650K Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S24C650PL Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
10 Specifications S27C650D Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.000 -/- VESA, 640 x 480 31.469 59.940 25.175 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.
Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
Appendix LATIN AMERICA GUATEMALA 1-800-299-0013 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) HONDURAS 800-27919267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-5077267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) PANAMA 800-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.
Appendix EUROPE CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com FINLAND 09 85635050 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com GERMANY 0180 5 SAMSUNG bzw. http://www.samsung.com 0180 5 7267864* (*0,14 €/Min. aus dem dt.
Appendix EUROPE SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com CIS ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 (GSM: 7799) http://www.
Appendix ASIA PACIFIC INDIA http://www.samsung.com 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT http://www.samsung.
Appendix MIDDlE EAST MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
Appendix Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080 vertical lines (vertical resolution).
Index A H Appendix 100 HDMI Black Level 50 B I Before Connecting 30 Image Size 48 Blue 57 INFORMATION 73 Brightness 43 Installation 26 C K Checking the Contents 19 Key Repeat Time 70 Cleaning 8 Coarse 53 Color Tone 58 L Language 60 Connecting and Using a PC 31 Contact SAMSUNG WORLD WIDE 100 Contrast 44 Copyright 7 Correct Disposal 107 M MagicRotation 80 MultiScreen 78 Correct posture to use the product 18 Customized Key 72 O Off Timer 66 D Display Time 62 P Parts 21 E PC/AV Mode 68
Index Responsibility for the Pay Service (Cost to Customers) 106 S Safety Precautions 10 SAMSUNG MAGIC Bright 46 Sharpness 45 Source Detection 71 Standard Signal Mode Table 93 T Transparency 63 Turn Off After 67 Index 111
