User manual

B. Wall Mount Kit (Optional)

To attach a wall mount to your monitor, follow these steps:

Turn the product off, and then unplug the power cord from the wall outlet.

2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product

face down.

3. Remove the stand as described previously.

4. Align the groove of the Monitor's wall mount base with the groove in the wall mount kit

and firmly fix the wall mount kit by fastening the screws.

Note

• If

you use a screw that is longer than the standard specifications, the inside of the product

may be damaged.

• For wall mounts that are not compatible with the standard VESA specifications, the length

of the screw may differ depending on the corresponding specifications.

• Do not use screws that are incompatible with the standard VESA specifications and do

not screw them in using excessive force.

This may result in damage to the product or injury due to the product falling. Samsung

shall not be held liable for any damage or injury.

• Samsung shall not be held liable for any damage to the product or injury caused by using

a wall mount that is not compatible with the specified specifications or due to an installation

not performed by an authorized installation engineer.

• When installing the product using a wall mount, purchase a wall mount that provides at

least 4 inches (10 cm) of clearance from the wall.

• Samsung shall not be held liable for any problems caused by using a stand that is not

compatible with the specified specifications.

• Use a wall mount according to specifications of your country.

Your LCD Display

Front

SOURCE/[ ] button

When

the OSD menu is not on the screen, switches from PC mode to Video

mode. Selects the input source that an external device is connected to in

the order below:

Introduction

Downloaded From TV-Manual.com Manuals