User manual

[PC] → [HDMI] → [MagicInfo]
When the OSD Menu is displayed, activates a highlighted menu item.
MENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
- VOL +
Moves from one menu item to another horizontally or adjusts selected
menu values. When OSD is not on the screen, press the button to adjust
volume.
SEL
Moves from one menu item to another vertically or adjusts selected menu
values.
Power button [ ]
Use this button to turn your LCD Display on and off.
Brightness Sensor
Automatically
detects the ambient brightness and adjusts the brightness
of the monitor accordingly.
Power indicator
Shows PowerSaver mode by blinking green
Note
See PowerSaver
described in the manual for further information regarding
power saving functions. For energy conservation, turn your LCD Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
Rear
Note
For
detailed information concerning cable connections, refer to Connecting Cables under
Setup. The LCD Display 's configuration at the back may vary slightly depending on the model.
Introduction
Downloaded From TV-Manual.com Manuals