SyncMaster 320MX-2,320MXn-2 LCD-scherm Gebruikershandleiding
Veiligheidsinstructies Symbolen Opmerking U moet deze veiligheidsvoorschriften volgen om te voorkomen dat u risico loopt en het apparaat beschadigd raakt. Lees de instructies zorgvuldig en gebruik het product op de juiste manier. Waarschuwing / Voorzichtig Het niet opvolgen van de aanwijzingen die dit symbool aanduidt kan resulteren in persoonlijk letsel of schade aan de apparatuur.
Veiligheidsinstructies Controleer of de stekker goed en stevig in het stopcontact zit. • Dit kan brand veroorzaken. Buig de voedingskabel niet, trek er niet aan en plaats er geen zware spullen op. • Dit kan brand veroorzaken. Sluit niet meerdere apparaten aan op hetzelfde stopcontact. • Hierdoor kan, door oververhitting, brand ontstaan. Verwijder het netsnoer niet tijdens het gebruik van het product. • Dit kan een elektrische schok veroorzaken waardoor het product beschadigd kan raken.
Veiligheidsinstructies PLAATS GEEN KAARSEN, INSECTENWERENDE MIDDELEN, SIGARETTEN OF VERWARMINGSAPPARATUUR IN DE BUURT VAN HET PRODUCT. • Dit kan brand veroorzaken. Houd verwarmingsapparatuur zo veel mogelijk uit de buurt van de voedingskabel en het product. • Dit zou een elektrische schok of brand kunnen veroorzaken. Plaats het apparaat niet op een slecht geventileerde plaats, zoals in een boekenkast. • Dit zou kunnen resulteren in brand door oververhitting.
Veiligheidsinstructies Spuit geen reinigingsmiddelen rechtstreeks op het oppervlak van het product. • Dit kan verkleuringen en vervaging van de structuur veroorzaken. Ook kan het oppervlak van het scherm losraken. Reinig het product met een zachte doek met alleen een reinigingsmiddel voor LCD-schermen. Als u toch een ander reinigingsmiddel moet gebruiken, moet u dit in een verhouding van 1:10 in water verdunnen. Gebruik voor het reinigen van de stekkers en het stopcontact een droge doek.
Veiligheidsinstructies Stel het product niet bloot aan vocht, stof, rook of water en installeer het niet in een auto. • Dit zou een elektrische schok of brand kunnen veroorzaken. Als u het product laat vallen of als de behuizing kapot gaat, moet u het product uitschakelen en de stekker uit het stopcontact halen. Neem contact op met een Servicecentrum. • Dit zou een elektrische schok of brand kunnen veroorzaken. Raak bij onweer het netsnoer en de antennekabel niet aan.
Veiligheidsinstructies Als een stilstaand beeld lang wordt weergegeven, kan een nabeeld of vlek ontstaan. • Zet het product in de slaapstand of gebruik een bewegende schermbeveiliging als u het product langere tijd niet gebruikt. Stel een resolutie en frequentie in die geschikt zijn voor het product. • Anders kan schade aan uw ogen ontstaan. Zet bij het gebruik van een koptelefoon het volume niet te hard. • Dit kan uw gehoor beschadigen.
Veiligheidsinstructies • Uw kinderen kunnen aan het product gaan hangen waardoor het kan vallen, wat persoonlijk letsel of zelfs de dood tot gevolg kan hebben. Voorkom dat kinderen de batterij in hun mond stoppen als deze uit de afstandsbediening wordt gehaald. Houd de batterij buiten bereik van kinderen. • Neem direct contact op met uw arts als een kind een batterij in zijn mond heeft gestopt. Let bij het plaatsen van de batterij op de juiste polariteit (+, -).
Veiligheidsinstructies Houd de kleine accessoires buiten bereik van kinderen. Wees voorzichtig bij het instellen van de hoek van het product of de hoogte van de voet. • Uw hand of vingers kunnen klem raken. • Als u het product te ver kantelt, kan het vallen en persoonlijk letsel veroorzaken. Plaats het product niet op een plaats waar kinderen er gemakkelijk bij kunnen. • Anders kan het product vallen en persoonlijk letsel veroorzaken. • Het voorste deel ven het product is zwaar.
Inleiding Inhoud van de verpakking Opmerking Controleer of de volgende onderdelen bij het LCD-scherm zijn geleverd. Neem contact op met uw verkoper als er onderdelen ontbreken. Neem contact op met een plaatselijke dealer voor de aanschaf van accessoires. Opmerking Deze standaard is niet geschikt voor de staande variant.
Inleiding Overig (Niet op alle locaties verkrijgbaar) (Alleen van toepassing op model MXn-2) Apart verkrijgbaar D-Sub-kabel DVI-kabel LAN-kabel (Alleen van toepassing op model MXn-2) Wandmontageset Tv-tunermodule NetWork-module (Alleen van toepassing op model MX-2) Semi Stand-montageset Opmerking • U kunt een aparte netwerkmodule of een tv-tunermodule aanschaffen en aansluiten. Voor meer informatie over het gebruik daarvan raadpleegt u bijbehorende gebruiksaanwijzing.
Inleiding Uw LCD-scherm Voorkant MENU-knop [MENU] Het schermmenu openen en sluiten. U kunt hiermee ook het schermmenu afsluiten of terugkeren naar het vorige menu. Navigatieknoppen (omhoog/omlaag) Sprint van de ene menuoptie naar de andere in verticale richting of wijzigt de geselecteerde menuwaarden. Instelknoppen (naar links/naar rechts)/volumeknoppen Sprint van de ene menuoptie naar de andere in horizontale richting of wijzigt de geselecteerde menuwaarden.
Inleiding Opmerking • Dit is beschikbaar als een tv-tunermodule is aangesloten. Aan/uit-knop [ ] Gebruik deze knop om het LCD-scherm in en uit te schakelen. Controlelampje stroom Wanneer deze groen knippert, is de modus PowerSaver ingeschakeld. Opmerking Zie het gedeelte PowerSaver in de handleiding voor meer informatie over energiebesparingsfuncties. Om energie te besparen, kunt u het beste het LCD-scherm uitschakelen wanneer u dit gedurende langere tijd niet gebruikt.
Inleiding RS232C OUT/IN (RS232C seriële poort) MDC (Multiple Display Control)-programmapoort DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (Audioaansluiting voor PC/DVI/ HDMI (ingang)) DVI / PC / HDMI IN [HDMI] Sluit de HDMI-aansluiting op de achterkant van uw LCD-scherm aan op de HDMI-aansluiting op het digitale uitvoerapparaat door middel van een HDMI-kabel.
Inleiding RGB OUT (Alleen van toepassing op model MXn-2) LAN (Aansluiting voor LAN) (Alleen van toepassing op model MXn-2) USB (Aansluiting voor USB) Compatibel met toetsenbord/muis, opslagapparatuur met grote capaciteit (Alleen van toepassing op model MXn-2) Kensington Lock Het Kensington-slot is een vergrendeling waarmee u het systeem fysiek kunt vastzetten voor gebruik in een openbare ruimte. Het slot moet apart worden aangeschaft.
Inleiding 3. Bevestig het Kensington-slot aan een tafel of ander zwaar, vaststaand object. Opmerking Zie Kabels aansluiten voor meer informatie over kabelverbindingen. Afstandsbediening Opmerking De prestaties van de afstandsbediening worden mogelijk beïnvloed door een tv of ander elektronisch apparaat dat actief is in de buurt van het LCD-scherm. Hierdoor kan de frequentie van de afstandsbediening worden gestoord.
Inleiding P.MODE DUAL/MTS PIP SWAP 1. POWER Hiermee schakelt u het product in. 2. Off Hiermee schakelt u het product uit. 3. Number Buttons -knop 4. DEL Druk hierop om het kanaal te wijzigen. De knop "-" werkt alleen bij DTV. U selecteert hiermee MMS (meerdere kanalen) voor een DTV. 5. + VOL - Past het geluidsniveau aan. 6. Pauzeert (dempt) het geluid tijdelijk. Dit wordt weergegeven linksonder in het scherm. De audio wordt hervat wanneer u in de modus Mute (Dempen) op MUTE of - VOL + drukt.
Inleiding 16.MDC MDC-snelstartknop 17.LOCK Hiermee activeert of deactiveert u alle functietoetsen op de afstandsbediening en het LCD-scherm met uitzondering van de Aan/uit-knop en LOCK-knop. 18. SOURCE Druk op de knop om de bron van het ingangssignaal SOURCE te veranderen. U mag SOURCE alleen veranderen voor externe apparaten die op dat moment op het LCD-scherm zijn aangesloten. 19. ENTER/PRE-CH Met deze knop keert u terug naar het laatst gebruikte kanaal. 20.
Inleiding U kunt de modus MTS (Multichannel Television Stereo) selecteren. FM Stereo 30. PIP Type geluid MTS/S_Mode Standaard Mono Mono Stereo Mono ↔ Stereo Handmatig wijzigen SAP Mono ↔ SAP Mono Telkens wanneer u op de knop drukt, wordt een PIP-scherm weergegeven. - Deze functie werkt niet voor dit LCD-scherm. 31.SWAP Hiermee wordt de inhoud van de PIP-afbeelding en de hoofdafbeelding gewisseld.
Inleiding Bovenzijde LCD-scherm FORMAAT NETWERKMODEL Installatie VESA-beugel • Let er bij het installeren van VESA op, dat u voldoet aan de internationale VESA-normen. • Informatie over en aankoop en installatie van de VESA-steun: Neem contact op met uw dichtstbijzijnde SAMSUNG-distributeur om een bestelling te plaatsen. Nadat de bestelling is geplaatst, zal een professioneel team de steun bij u komen installeren. • Er zijn ten minste twee personen nodig om het LCD-scherm te verplaatsen.
Inleiding Afmetingen Opmerking Gebruik voor het bevestigen van de beugel aan de muur alleen kolomschroeven met een diameter van 6 mm en een lengte van 8 tot 12 millimeter. Installatie van de wandsteun • Neem contact op met een technicus alvorens de wandsteun te bevestigen. • SAMSUNG Electronics is niet verantwoordelijk voor enige schade aan het product of letsel bij de klant wanneer de installatie wordt uitgevoerd door de klant. • Dit product is geschikt voor installatie aan cementen muren.
Inleiding Montage van de wandsteun Opmerking Er zijn twee scharnieren (links en rechts). Gebruik een correcte ondergrond. 1. Plaats de bevestigingsschroef en draai hem vast in de richting van de pijl. Bevestig de muurbeugel daarna aan de wand. Er zijn twee scharnieren (links en rechts). Gebruik een correcte ondergrond. 2.
Inleiding 3. Controleer het installatiediagram en markeer de boorpunten op de wand. Gebruik een bit van 5,0 mm om gaten dieper dan 35 mm te boren. Plaats de pluggen in de betreffende gaten. Plaats de gaten van de beugels en scharnieren voor de bijbehorende pluggaten, plaats de 11 schroeven A in de gaten en draai deze vast. Het product op de wandsteun bevestigen De vorm van het product kan afhankelijk van het model variëren. (de montage van de kunststof drager en de schroeven zijn hetzelfde) 1.
Inleiding 3. Draai de vier schroeven uit stap 2 vast (kunststof drager + schroef B) in de gaten op de achterkant van het product. 4. Verwijder de veiligheidspin (3) en plaats de vier producthouders in de bijbehorende beugelgaten (1). Plaats het product (2) zo dat het stevig is bevestigd aan de beugel. Plaats de veiligheidspin (3) opnieuw en draai deze stevig vast om het product veilig op de beugel te monteren.
Inleiding Opmerking U kunt de stand van de beugel aanpassen tussen -2 ˚ en 15 ˚. Zorg ervoor dat u het midden van het product gebruikt om de stand aan te passen, en niet de linker- of rechterkant.
Aansluitingen Aansluiten op een computer Gebruik een netsnoer met aarding • In het geval van defecten kan de aardaansluiting een elektrische schok veroorzaken. Sluit de aardaansluiting op de juiste manier aan voordat u het apparaat op de netstroom aansluit. Koppel het apparaat eerst los van de netstroom wanneer u de aardaansluiting wilt loskoppelen. Opmerking AV-invoerapparaten zoals dvd-spelers, videorecorders of camcorders, maar ook computers kunnen op het LCD-scherm worden aangesloten.
Aansluitingen Sluit de audiokabel van het LCD-scherm aan op de audiopoort op de achterkant van uw computer. Opmerking • Schakel zowel de computer als het LCD-scherm in. • De DVI / D-sub -kabel is optioneel. • Neem contact op met een plaatselijk SAMSUNG Electronics Servicecentrum voor de aanschaf van accessoires. Aansluiten op andere apparatuur Gebruik een netsnoer met aarding • In het geval van defecten kan de aardaansluiting een elektrische schok veroorzaken.
Aansluitingen Aansluiten op een camcorder 1. Zoek de AV-uitgangen op de camcorder. Deze bevinden zich doorgaans op de zijkant of achterkant van de camcorder. Sluit audiokabels aan op de AUDIO-uitgangen op de camcorder en de op de AV AUDIO IN [L-AUDIO-R] op het LCD-scherm. 2. Sluit een videokabel aan op de VIDEO-uitgang op de camcorder en op de AV IN [VIDEO] op het LCD-scherm. 3. Selecteer AV voor de camcorderaansluiting met de knop Source op de voorkant van het LCD-scherm of op de afstandsbediening.
Aansluitingen Aansluiten met gebruik van een DVI naar HDMI-kabel Opmerking • Sluit de DVI-uitgang van een digitaal uitvoerapparaat aan op de HDMI-aansluiting van het LCD-scherm met een DVI-naar-HDMI-kabel. • Sluit de rode en witte aansluitpunten van een RCA-naar-stereo-kabel (voor pc) aan op de bijbehorende audiouitgangen van het digitale uitvoerapparaat en sluit de andere aansluiting aan op de DVI / PC / HDMI AUDIO IN-aansluiting van het LCD-scherm.
Aansluitingen Opmerking Sluit de LAN-kabel aan. (Alleen van toepassing op model MXn-2) Een USB-apparaat aansluiten Gebruik een netsnoer met aarding • In het geval van defecten kan de aardaansluiting een elektrische schok veroorzaken. Sluit de aardaansluiting op de juiste manier aan voordat u het apparaat op de netstroom aansluit. Koppel het apparaat eerst los van de netstroom wanneer u de aardaansluiting wilt loskoppelen.
Software gebruiken Stuurprogramma voor de monitor Opmerking Als het besturingssysteem vraagt om het stuurprogramma voor de monitor, plaatst u de CD-ROM die bij deze monitor is meegeleverd. De installatie van het stuurprogramma kan per besturingssysteem ietwat verschillen. Volg de instructies voor uw besturingssysteem. Zorg voor een lege schijf en download het stuurprogramma van de hier weergegeven website op internet. Internet-site: http://www.samsung.
Software gebruiken Opmerking Dit stuurprogramma voor de monitor is gecertificeerd onder het MS-logo. De installatie veroorzaakt geen beschadigingen in uw systeem. Het gecertificeerde stuurprogramma wordt op de startpagina van Samsung Monitor geplaatst. http://www.samsung.com/ Het stuurprogramma voor de monitor installeren (handmatig) Microsoft® Windows Vista™ besturingssysteem 1. Plaats de cd met de gebruikershandleiding in uw CD-ROM-station. 2. (Start) en op 'Control Panel (Configuratiescherm)'.
Software gebruiken 5. Klik op 'Properties' (Eigenschappen) op het tabblad 'Monitor'. Als de knop 'Properties' (Eigenschappen) niet beschikbaar is, is de configuratie van uw monitor voltooid. De monitor kan zo gebruikt worden. Als het bericht 'Windows needs...' (Uw toestemming is nodig...) wordt weergegeven (zie onderstaande afbeelding), klikt u op 'Continue' (Doorgaan). Opmerking Dit monitorstuurprogramma is gecertificeerd onder het MS-logo. De installatie veroorzaakt geen beschadigingen in uw systeem.
Software gebruiken 8. Klik op 'Have Disk...' (Bladeren…) en selecteer de map (bijvoorbeeld D:\Drive) waar het installatiebestand van het stuurprogramma staat. Klik op 'OK'. 9. Selecteer uit de lijst met monitoren het model dat overeenkomt met uw monitor en klik op 'Next' (Volgende). 10. Klik in de volgende schermen achtereenvolgens op 'Close' (Sluiten) → 'Close' (Sluiten) → 'OK' → 'OK'.
Software gebruiken Microsoft® Windows® XP besturingssysteem 1. Plaats de cd in het CD-ROM-station. 2. Klik op 'Start' → 'Control Panel' (Configuratiescherm) en klik vervolgens op het pictogram 'Appearance and Themes' (Vormgeving en thema's). 3. Klik op het pictogram 'Display' (Beeldscherm), selecteer de tab 'Settings' (Instellingen) en klik op 'Advanced...' (Geavanceerd...). 4.
Software gebruiken 5. Klik op 'Update Driver...' (Stuurprogramma bijwerken), selecteer 'Install from a list or...' (Installeren uit een lijst of...) en klik op de knop 'Next' (Volgende). 6. Selecteer'Don't search, I will...' (Niet zoeken, ik wil...), klik op 'Next' (Volgende) en vervolgens op 'Have disk' (Bladeren). 7. Klik op de knop 'Browse' (Bladeren), selecteer A:(D:\Driver) en selecteer het model van uw monitor in de lijst. Klik vervolgens op de knop 'Next' (Volgende). 8.
Software gebruiken Opmerking Dit stuurprogramma voor de monitor is gecertificeerd onder het MS-logo. De installatie veroorzaakt geen beschadigingen in uw systeem. Het gecertificeerde stuurprogramma wordt op de startpagina van Samsung Monitor geplaatst. http://www.samsung.com/ 9. Klik op de knop 'Close' (Sluiten) en vervolgens op 'OK'. 10. De installatie van het stuurprogramma voor de monitor is nu voltooid.
Software gebruiken 2. Dubbelklik op het pictogram 'Display' (Beeldscherm). 3. Selecteer het tabblad 'Settings' (Instellingen) en klik op de knop 'Advanced Properties' (Geavanceerd). 4. Selecteer 'Monitor'. Scenario 1: Als de knop 'Properties' (Eigenschappen) niet actief is, is uw monitor correct geconfigureerd. Beëindig de installatie. Scenario 2: Als de knop 'Properties' (Eigenschappen) actief is, klik u op de knop 'Properties' (Eigenschappen)' en volgt u de onderstaande instructies. 5.
Software gebruiken 1. Klik op 'Start', 'Settings' (Instellingen), 'Control Panel' (Configuratiescherm) en dubbelklik op het pictogram 'Display' (Beeldscherm). 2. Klik in het scherm Display Registration Information (Registratiegegevens beeldscherm) op de tab Settings (Instellingen) en klik vervolgens op'All Display Modes' (Alle weergavemodi). 3. Selecteer de gewenste modus (Resolution (Resolutie), Number of colors (Aantal kleuren) en Vertical frequency (Verticale frequentie)) en klik op 'OK''. 4.
Inleiding Multiple Display Control (MDC) is een toepassing waarmee verschillende beeldschermen gemakkelijk en tegelijk op een pc kunnen worden gebruikt. RS-232C, een standaard voor seriële communicatie, wordt gebruikt voor de communicatie tussen een computer en een beeldscherm. Daarom moet er een seriële kabel verbonden worden met de seriële poort van uw computer en de seriële poort van het beeldscherm. Begin - Hoofdscherm Klik op Start > Program > Samsung > MDC System, om het programma te starten.
Hoofdpictogrammen Selectieknop Remocon Overzicht Safety Lock Selectie beeldscherm Poortselectie Bedieningsgereedschappen 1. Gebruik de hoofdpictogrammen om over te schakelen naar ieder beeldscherm. 2. Met deze optie kunt u de signaalontvangst van de afstandsbediening van de betreffende beeldschermeenheid in- en uitschakelen. 3. Stelt de slotfunctie in. Wanneer u de slotfunctie instelt, kunt u de knoppen power en lock alleen op de afstandsbediening en op de set gebruiken. 4.
1. De Meervoudige Display Control wordt oorspronkelijk ingesteld op COM1. 2. Als u een andere poort dan COM1 gebruikt, kunt u COM1 tot en met COM4 selecteren in het menu Port selection. 3. Als de exacte poortnaam die op de monitor met een seriële kabel is aangesloten, niet is geselecteerd, is communicatie niet mogelijk. 4. De geselecteerde poort is in het programma opgeslagen en wordt ook voor het volgende programma gebruikt. Power Control 1. Klik in de hoofdpictogrammen op de optie Power Control.
In het overzicht treft u basisinformatie aan die noodzakelijk is voor Power Control. 1) (Power Status (resterend vermogen)) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Gebruik de knop Alles selecteren of het aankruisvakje, om een beeldscherm te selecteren dat u wilt bedienen. Met de optie Power Control kunt u sommige functies bedienen van het geselecteerde beeldscherm.
- Schakelt het geselecteerde beeldscherm Aan/Uit. 2) Volume - Controleert het volumeniveau van het geselecteerde scherm. Het ontvangt de volumewaarde van het geselecteerde beeldscherm en geeft dit weer in de schuifbalk. (Als u een selectie annuleert of de optie Alles selecteren selecteert, zal de waarde de standaardwaarde 10 aannemen) 3) Mute On/Off (Mute Aan/Uit) - Schakelt de Mute van het geselecteerde beeldscherm Aan/Uit.
Het overzicht toont u basisinformatie die noodzakelijk is voor de Input Source Control. 1) PC - Verandert de ingangsbron van het geselecteerde display in PC. 2) BNC - Verandert de ingangsbron van het geselecteerde display in BNC. 3) DVI - Verandert de ingangsbron van het geselecteerde display in DVI. 4) TV - Verandert de ingangsbron van het geselecteerde display in TV. 5) DTV - Verandert de ingangsbron van het geselecteerde display in DTV.
Het overzicht toont u basisinformatie die noodzakelijk is voor het instellen van het beeldformaat. 1) (Power Status (resterend vermogen)) - Geeft aan of het huidige beeldscherm in of uitgeschakeld is. 2) Image Size - Geeft aan of het huidige Image Size in of uitgeschakeld is. 3) Input - Geeft de huidige Ingangsbron aan van het beeldscherm dat u momenteel gebruikt. 4) Het overzicht geeft alleen de beeldschermen weer, waarvan de ingangsbron PC, BNC, DVI is.
Het overzicht toont u basisinformatie die noodzakelijk is voor het instellen van het beeldformaat. 1) Klik op het tabblad Video Source (videobron) om de beeldgrootte aan te passen voor TV, AV, S-Video, Component, HDMI, DTV. Klik op de optie Alles selecteren of maak gebruik van het aankruisvakje, om een beeldscherm te selecteren dat u wilt bedienen. 2) Het overzicht geeft alleen het beeldscherm weer waarvan Video TV, AV, S-VIDEO, Component, HDMI en DTV de ingangsbron is.
Het overzicht toont u basisinformatie die noodzakelijk is voor Tijdcontrole. 1) Current Time - Stel de huidige tijd in voor het geselecteerde beeldscherm (PC-tijd) - U moet eerst de PC-tijd veranderen, voordat u de huidige tijd kunt veranderen. 2) On Time Setup - Stelt de uren, minuten, AM/PM en het volume van het geselecteerde beeldscherm in op de gewenste starttijd. 3) Off Time Setup - Stelt de uren, minuten en AM/PM in op de gewenste eindtijd van het geselecteerde beeldscherm.
Het overzicht toont u basisinformatie die noodzakelijk is voor het instellen van het PIP-formaat. 1) PIP Size - Geeft het huidige PIP-formaat aan van het beeldsherm dat u momenteel gebruikt. 2) OFF - Schakelt de PIP uit van het geselecteerde display. 3) Large - Schakelt de PIP in van het geselecteerde display en verandert het formaat in Large. 4) Small - Schakelt de PIP in van het geselecteerde display en verandert het formaat in Small.
Het overzicht toont u basisinformatie die noodzakelijk is voor het instellen van het PIP-bron. 1) PIP Source - U kunt de PIP-bron instellen, zodra u de monitor heeft ingeschakeld. 2) PC - Verandert de PIP-bron van het geselecteerde display in PC. 3) BNC - Verandert de PIP-bron van het geselecteerde display in BNC. 4) DVI - Verandert de PIP-bron van het geselecteerde display in DVI. 5) AV - Verandert de PIP-bron van het geselecteerde display in AV.
Het overzicht toont u basisinformatie die noodzakelijk is voor Settings Control. Als iedere functie geselecteerd is, wordt de ingestelde waarde van de geselecteerde functie weergeven op de schuifbalk. Als u de optie Alles selecteren geselecteerd heeft, verandert de waarde weer in de standaardwaarde 50. Wanneer u een waarde op dit scherm wijzigt, wordt de modus automatisch gewijzigd in "CUSTOM". 1) Picture - Alleen beschikbaar voor TV, AV, S-Video, Component, HDMI, DTV.
Het overzicht toont u basisinformatie die noodzakelijk is voor Settings Control. Nadat elke functie is geselecteerd, wordt de ingestelde waarde voor de geselecteerde functie weergegeven in de schuifbalk. Wanneer de selectie is gemaakt, zal elke functie de waarde van de instelling ophalen en weergeven in de schuifbalk. Als u de optie Alles selecteren geselecteerd heeft, verandert de waarde weer in de standaardwaarde 50.
verschijnen. Het overzicht toont u basisinformatie die noodzakelijk is voor Settings Control. Nadat elke functie is geselecteerd, wordt de ingestelde waarde voor de geselecteerde functie weergegeven in de schuifbalk. Wanneer de selectie is gemaakt, zal elke functie de waarde van de instelling ophalen en weergeven in de schuifbalk. Als u de optie Alles selecteren geselecteerd heeft, verandert de waarde weer in de standaardwaarde 50.
Het overzicht toont u basisinformatie die noodzakelijk is voor Settings Control. 1) Image Lock - Alleen beschikbaar voor PC, BNC. 2) Coarse - Met deze optie kunt u de Coarse instellen van het geselecteerde beeldscherm. 3) Fine - Met deze optie kunt u de Fine instellen van het geselecteerde beeldscherm. 4) Position - Met deze optie kunt u de positie instellen van het geselecteerde beeldscherm. 5) Auto Adjustment - Als u zelf het binnenkomende signaal wilt aanpassen.
Op het informatieraster ziet u een aantal basisgegevens verschijnen. 1) Maintenance - Hiermee is de functie Maintenance Control mogelijk voor alle ingangsbronnen. 2) Auto Lamp Control - Regelt automatisch de achtergrondverlichting van de geselecteerde display op een specifieke tijd. De Manual Lamp Control (handmatige lampbediening) wordt automatisch uitgeschakeld als u overschakelt naar de Auto Lamp Control (automatische lampbediening).
1) Scroll - Met deze functie kunt u ingebrande beelden verwijderen die voorkomen wanneer een stilstaand beeld lange tijd op het geselecteerde scherm wordt weergegeven. 2) Pixel Shift - Hiermee kan het scherm precies worden verplaatst op de opgegeven tijdsinterval. 3) Safety Screen - De functie Safety Screen (Veiligheidsscherm) wordt gebruikt om ingebrande beelden te voorkomen bij het langdurig weergeven van een stilstaande afbeelding.
1) Video Wall - Een videomuur is een aantal videoschermen die met elkaar zijn verbonden, zodat op ieder scherm een gedeelte van het geheel wordt weergegeven of zodat op ieder scherm het beeld wordt herhaald. 2) Video Wall (Screen divider) - De videomuur kan op verschillende manieren worden ingedeeld. U kunt gebruikmaken van verschillende schermen en deze op verschillende manieren indelen. z Selecteer een modus in Screen divider (Schermindeling).
worden deze schermen niet goed waargenomen door het programma. De oorzaak hiervan is een gegevensconflict. - Controleer of de ID van het beeldscherm tussen een waarde van 0 en 25 ligt. (Instellen via het beeldschermmenu) Opmerking: Het ID van het beeldscherm moet een waarde hebben tussen de 0 en de 25. Als deze waarde buiten dit bereik ligt, kan het MDC-systeem het beeldscherm niet bedienen. 2. Het beeldscherm dat u wilt bedienen, verschijnt niet in de andere bedieningsoverzichten.
Het LCD-scherm aanpassen Input Beschikbare modi • PC / DVI • AV • HDMI • MagicInfo • TV Opmerking • Het menu TV is beschikbaar wanneer een tv-tunermodule is aangesloten. • MX-2 kan gebruikmaken van menu MagicInfo wanneer netwerkmodule is gekoppeld. Source List MENU → ENTER → → , → ENTER → → ENTER Hiermee kunt u PC, DVI of een andere externe ingangsbron die op het LCD-scherm is aangesloten, selecteren. Gebruiken voor het selecteren van het scherm van uw keuze. 1. PC 2. DVI 3. AV 4.
Het LCD-scherm aanpassen , → → ENTER Geef het invoerapparaat dat op de ingangsaansluitingen is aangesloten een naam voor een eenvoudige selectie van de ingangsbron. 1. PC 2. DVI 3. AV 4. HDMI Opmerking • Stel bij aansluiting van een PC op de HDMI- of DVI-ingang de optie Edit Name in op PC. Stel in andere gevallen Edit Name in op AV.
Het LCD-scherm aanpassen → , → ENTER MagicBright is een functie voor een optimale kijkomgeving, afhankelijk van het materiaal dat u bekijkt. Op dit moment zijn er vier verschillende modi beschikbaar: Entertain, Internet, Text en Custom. Elke modus heeft zijn eigen vooraf ingestelde helderheidswaarde. U kunt eenvoudig een van de vier instellingen selecteren door op de bedieningsknop MagicBright te drukken. (Niet beschikbaar in de modus Dynamic Contrast van On.) 1.
Het LCD-scherm aanpassen → , → ENTER Hiermee wordt het contrast aangepast. Brightness → ENTER → MENU → → , → ENTER → → → → ENTER → → ENTER Hiermee wordt de helderheid aangepast. Sharpness MENU → → , → ENTER → → → ENTER → → ENTER Hiermee wordt de scherpte aangepast. Color Tone MENU → → , → ENTER → → → →ENTER → → ENTER U kunt de kleurtinten aanpassen. (Niet beschikbaar in de modus Dynamic Contrast van On.) 1. Uit 2. Cool 3. Normal 4. Warm 5.
Het LCD-scherm aanpassen Opmerking Als u de Color Tone instelt op Cool, Normal, Warm of Custom, wordt de functie Color Temp uitgeschakeld. Als u de Color Tone instelt op Off, wordt de functie Color Control uitgeschakeld. Color Control Hiermee wordt de kleurbalans voor de kleuren rood, groen en blauw aangepast. MENU → → ENTER → → → → → ENTER → (Niet beschikbaar in de modus Dynamic Contrast van On.
Het LCD-scherm aanpassen Opmerking Deze functie wordt alleen ingeschakeld als Color Tone is ingesteld op Off. Image Lock Image Lock om het beeld fijn af te stemmen en het beste beeld te verkrijgen door het verwijderen van ruis dat onstabiele beelden met trillingen en flikkeringen veroorzaakt. Als er geen bevredigende resultaten worden bereikt met de optie Fine (Fijn), kunt u eerst de optie Coarse (Grof) gebruiken en vervolgens opnieuw de optie Fine.
Het LCD-scherm aanpassen → , → ENTER Past de verticale schermlocatie aan. Auto Adjustment MENU → → ENTER → → → → → → → ENTER → De waarden voor Fine, Coarse en Position worden automatisch aangepast. Wanneer de resolutie wordt gewijzigd via het configuratiescherm, wordt de automatische functie uitgevoerd. (Alleen beschikbaar in de modus PC) Opmerking De directe toets op de afstandsbediening is 'AUTO'.
Het LCD-scherm aanpassen → , 2. → ENTER G-Gain MENU → → , 3. → ENTER → → ENTER → → → ENTER → → ENTER → → → → → → → ENTER → → → → ENTER→ → ENTER → ENTER R-Offset MENU → → ENTER → → ENTER → → → , → → → → → → → ENTER → → → → → ENTER→ → ENTER → ENTER G-Offset MENU → → ENTER → → ENTER → → → , 6. → → → → → → ENTER→ B-Gain → , 5. → → ENTER MENU → → ENTER → → ENTER → → 4.
Het LCD-scherm aanpassen → , → ENTER De Size kan worden geschakeld. 1. 16:9 2. 4:3 Dynamic Contrast MENU → → , → ENTER → → → → → → → → → → ENTER → → ENTER Met Dynamic Contrast wordt de spreiding van het visuele signaal automatisch gedetecteerd en aangepast om een optimale contrastinstelling te verkrijgen. 1. Uit 2.
Het LCD-scherm aanpassen • MX-2 kan gebruikmaken van menu MagicInfo wanneer netwerkmodule is gekoppeld. Mode MENU → , → → ENTER → → ENTER → → ENTER Het LCD-scherm beschikt over vier automatische beeldinstellingen ('Dynamic', 'Standard', 'Movie' en 'Custom') die zijn vooringesteld. Dynamic, Standard, Movie of Custom kunnen worden geactiveerd. (Niet beschikbaar in de modus Dynamic Contrast van On.) 1. Dynamic 2. Standard 3. Movie 4.
Het LCD-scherm aanpassen → , → ENTER Hiermee wordt de helderheid aangepast. Sharpness MENU → → , → ENTER → → → ENTER → → → → ENTER → → ENTER De scherpte van het beeld aanpassen. Color MENU → → → , → ENTER → → → ENTER → → → → → ENTER → ENTER De kleur van het beeld aanpassen. Tint MENU → → → , → ENTER → → → ENTER → → → → → → ENTER → ENTER Voegt een natuurlijke tint toe aan het PIP-scherm.
Het LCD-scherm aanpassen (Niet beschikbaar in de modus Dynamic Contrast van On.) 1. Uit 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Opmerking Als u de Color Tone instelt op Cool2, Cool1, Normal, Warm1 of Warm2, wordt de functie Color Temp uitgeschakeld. Color Temp MENU → → , → ENTER → → → → → ENTER → → ENTER Color Temp is een maatstaf voor de 'warmte' van de beeldkleuren. (Niet beschikbaar in de modus Dynamic Contrast van On.
Het LCD-scherm aanpassen 5. Just Scan: Geeft de ingevoerde beelden weer zonder deze bij te snijden, bij invoer van een HDMI 720p, 1080i of 1080p signaal. (Niet beschikbaar in de modus Dynamic Contrast van On.) Opmerking Bepaalde externe apparaten voeren mogelijk een signaal naar het scherm dat buiten de specificaties walt, waardoor een gedeelte van het beeld wegvalt. ze;fs wanneer de functie Just Scan wordt gebruikt. Zoom 1, Zoom 2 zijn niet beschikbaar in de HDMI-stand.
Het LCD-scherm aanpassen 2. Aan Dynamic Contrast MENU → → , → ENTER → → → → → → → → → ENTER → → ENTER Met Dynamic Contrast wordt de spreiding van het visuele signaal automatisch gedetecteerd en aangepast om een optimale contrastinstelling te verkrijgen. 1. Uit 2. Aan Sound Beschikbare modi • PC / DVI • AV • HDMI • MagicInfo • TV Opmerking • Het menu TV is beschikbaar wanneer een tv-tunermodule is aangesloten.
Het LCD-scherm aanpassen Het LCD-scherm is voorzien van een ingebouwde hifi-stereoluidspreker. 1. Standard Selecteert Standard voor de standaard fabrieksinstellingen. 2. Music Selecteert Music als u muziekvideo’s of concerten weergeeft. 3. Movie Selecteert Movie als u films bekijkt. 4. Speech Selecteert Speech als u een programma bekijkt waarin voornamelijk wordt gesproken (bijvoorbeeld het nieuws). 5. Custom Selecteert Custom als u de instellingen wilt aanpassen volgens uw persoonlijke voorkeuren.
Het LCD-scherm aanpassen Balance MENU → → , → → ENTER → → → ENTER → → → → ENTER → → ENTER Hiermee kunt u de balans tussen de linker- en rechterluidsprekers instellen. Auto Volume MENU → → , → → ENTER → → → → ENTER → → ENTER Hiermee worden de volumeverschillen tussen uitzendingen verminderd. 1. Uit 2. Aan SRS TS XT MENU → → , → → ENTER → → → → → ENTER → → ENTER SRS TS XT is een gepatenteerde SRS-technologie die er voor zorgt dat het afspelen van 5.
Het LCD-scherm aanpassen Opmerking De directe toets op de afstandsbediening is 'SRS'. Setup Beschikbare modi • PC / DVI • AV • HDMI • MagicInfo • TV Opmerking • Het menu TV is beschikbaar wanneer een tv-tunermodule is aangesloten. • MX-2 kan gebruikmaken van menu MagicInfo wanneer netwerkmodule is gekoppeld. Language MENU → → , → → → ENTER → → ENTER → → ENTER U kunt kiezen tussen 13 talen. Opmerking De taalkeuze is alleen van toepassing op de schermweergave.
Het LCD-scherm aanpassen → , → , → ENTER Huidige tijdsinstelling. Sleep Timer MENU → → , → → → ENTER → → → ENTER → → → ENTER→ → ENTER Hiermee wordt het LCD-scherm op bepaalde tijden automatisch uitgeschakeld. 1. Uit 2. 30 3. 60 4. 90 5. 120 6. 150 7.
Het LCD-scherm aanpassen → , / , → ENTER Het LCD-scherm automatisch inschakelen op een vooraf ingestelde tijd. Automatisch de modus en het volume regelen wanneer het LCD-scherm wordt ingeschakeld. Off Timer MENU → → → , → → → ENTER → / , → → ENTER → → → → → ENTER → ENTER Het LCD-scherm automatisch uitschakelen op een vooraf ingestelde tijd. Menu Transparency MENU → → , → → → ENTER → → → → ENTER → → ENTER Hiermee kunt u de doorzichtigheid van de achtergrond van het schermmenu wijzigen.
Het LCD-scherm aanpassen → [0∼9, 0∼9, 0∼9, 0∼9] → [0∼9, 0∼9, 0∼9, 0∼9] → [0∼9, 0∼9, 0∼9, 0∼9] Het wachtwoord kan worden gewijzigd. Opmerking Het vooraf ingestelde wachtwoord voor het LCD-scherm is '0000'. Energy Saving MENU → → , → → → ENTER → → → → → → ENTER → → ENTER Deze functie past het stroomverbruik van de eenheid aan om stroom te sparen. 1. Uit 2.
Het LCD-scherm aanpassen Wanneer de functie Video Wall is ingeschakeld, kunt u de opties voor de Video Wall instellen. MENU → → → → ENTER → → → → → → → → ENTER → Opmerking Wanneer de functie Video Wall is geactiveerd, zijn de functies Auto Adjustment, Image Lock, en Size niet beschikbaar. Video Wall werkt niet in de modus MagicInfo. Video Wall MENU → → → → ENTER → → ENTER → → , → → → → → → → ENTER → → ENTER Hiermee schakelt u de functie Video Wall van het geselecteerde scherm aan/uit. 1.
Het LCD-scherm aanpassen Horizontal MENU → → → → ENTER → → → → ENTER → → , → → → → → → → ENTER → → ENTER Hiermee stelt u in hoeveel delen van het scherm horizontaal moeten worden verdeeld. Er zijn vijf aanpassingsniveaus: 1, 2, 3, 4, en 5. Vertical MENU → → → → ENTER → → → → → ENTER → → , → → → → → → → ENTER → → ENTER Hiermee stelt u in hoeveel delen van het scherm verticaal moeten worden verdeeld. Er zijn vijf aanpassingsniveaus: 1, 2, 3, 4, en 5.
Het LCD-scherm aanpassen • Selecteer een modus in Schermindeling. • Selecteer een weergave in Schermindeling. • U stelt de selectie in door in de geselecteerde modus op een nummer te drukken. Safety Screen De functie Safety Screen wordt gebruikt om ingebrande beelden te voorkomen bij het langdurig weergeven van een stilstaand beeld. • De functie Safety Screen laat het beeld gedurende de aangegeven tijd over het scherm schuiven. • Deze functie is niet beschikbaar wanneer de stroom uitgeschakeld is.
Het LCD-scherm aanpassen Vertical Line MENU → ENTER → → → ENTER → → ENTER → → → → → → → → → → ENTER → → → ENTER → → , → Bepaalt hoeveel pixels het scherm verticaal wordt verplaatst. Er zijn vijf aanpassingsniveaus: 0, 1, 2, 3, en 4. Time MENU → → → → ENTER → → ENTER → → → → → → → → → → → ENTER → → → ENTER → → , → ENTER Stel het tijdinterval in voor respectievelijk de horizontale of verticale verplaatsing.
Het LCD-scherm aanpassen 2. Aan Mode MENU → → → → ENTER → → → ENTER → → → → → ENTER → → , → ENTER → → → → → → ENTER → → → → → → → → → → ENTER → → → ENTER → [Period] → , → ENTER U kunt het type Safety Screen wijzigen. 1. Scroll 2. Bar 3. Eraser Period MENU → → → → ENTER → → → ENTER → Met deze functie kunt u de uitvoeringsperiode voor elke ingestelde modus op de timer instellen.
Het LCD-scherm aanpassen • Mode-Bar, Eraser: 10~50 sec Scroll MENU → → → → ENTER → → → → ENTER → → → → → → → → → ENTER → Deze functie voorkomt na-afdrukken op het scherm door alle pixels op de LCD te verplaatsen volgens een ingesteld patroon. Gebruik deze functie als u na-afdrukken of symbolen op het scherm ziet, met name wanneer u voor langere tijd een stilstaand beeld op het scherm weergeeft.
Het LCD-scherm aanpassen Resolution Select MENU → → → , → → → ENTER → → → → → → → → → →ENTER → ENTER Wanneer het beeld niet juist wordt weergegeven op het scherm wanneer u de resolutie van de grafische kaart van de computer instelt op 1024 x 768 bij 60 Hz, 1280 x 768 bij 60 Hz, 1360 x 768 bij 60 Hz of 1366 x 768 bij 60 Hz, kunt u deze functie gebruiken (Resolution Select) om het beeld in de opgegeven resolutie weer te geven op het scherm. Opmerking Alleen beschikbaar in de modus PC 1. Uit 2.
Het LCD-scherm aanpassen Waarschuwing: Verhoog de tijd van inschakeling om een te hoog voltage te voorkomen. Side Gray MENU → → → → ENTER → ENTER → , → → → → → → → → → → → → → ENTER Selecteer de helderheid van het grijs van de schermachtergrond. 1. Uit 2. Light 3. Dark Reset Hiermee worden de productinstellingen teruggezet naar de standaard fabrieksinstellingen. De resetfunctie is alleen beschikbaar wanneer PC / DVI wordt gebruikt.
Het LCD-scherm aanpassen → , → ENTER OSD Rotation MENU → → → → ENTER → → → → ENTER → [OSD Rotation ] → , → → → → → → → → → → → → → → → → → → → → → → → ENTER OSD Rotate 1. Landscape 2. Portrait Lamp Control MENU → → → → ENTER → → → ENTER → → , → ENTER Hiermee wordt het achtergrondlicht aangepast om energie te besparen. Opmerking Deze functie werkt niet wanneer Dynamic Contrast is ingesteld op On in de modus PC, DVI, AV, HDMI of TV.
Opmerking • Het menu TV is beschikbaar wanneer een tv-tunermodule is aangesloten. • MX-2 kan gebruikmaken van menu MagicInfo wanneer netwerkmodule is gekoppeld. Multi Control Hiermee wordt een individuele ID toegewezen aan het apparaat. MENU → → • , → → → → ENTER → → ENTER → [0~9] ID Setup Hiermee worden onderscheidende ID's toegewezen aan het apparaat. • ID Input Hiermee kunt u de zenderfuncties per toestel instellen..
MagicInfo Beschikbare modi z PC / DVI z AV z HDMI z MagicInfo z TV Opmerking z Het menu TV is beschikbaar wanneer een tv-tunermodule is aangesloten. z MX-2 kan gebruikmaken van menu MagicInfo wanneer netwerkmodule is gekoppeld. Opmerking z Voor MagicInfo is een afstandsbediening beschikbaar MagicInfo. Het is echter aan te bevelen een afzonderlijk USBtoetsenbord te gebruiken.
1. Selecteer Magicinfo in het menu Source List . 2. Het venster MUISetup wordt geopend. Selecteer de taal die u wilt gebruiken. 3. Druk op de Install toets. Als u Do not show again selecteert en op de knop Install klikt, wordt het venster Scheduler geopend nadat de computer opnieuw is opgestart. 4. Sluit uw toetsenbord en muis aan en druk op de toetsen "ALT + F12" op uw toetsenbord. 5. De Windows Desktop wordt weergegeven en het pictogram MagicInfo verschijnt (de afbeelding zal worden ingevoegd).
Problemen oplossen Controle van de zelftestfunctie Opmerking Controleer het volgende voordat u telefonisch om ondersteuning vraagt. Neem contact op met een Service Center voor problemen die u niet zelf kunt oplossen. Controle van de zelftestfunctie 1. Schakel de computer en het LCD-scherm uit. 2. Koppel de videokabel los van de achterkant van de computer. 3. Schakel het LCD-scherm in.
Problemen oplossen Reinig het product met een zachte doek, nadat u de stekker uit het stopcontact hebt gehaald. • Gebruik geen wasbenzine, thinner of andere ontvlambare middelen, of een natte doek. • U wordt aangeraden een SAMSUNG-reinigingsmiddel te gebruiken om schade aan het scherm te voorkomen. 2) De flatscreenmonitor onderhouden Reinig het beeldscherm voorzichtig met een zachte doek (katoenflanel). • Gebruik geen aceton, wasbenzine of thinner.
Problemen oplossen Problemen met betrekking tot de installatie (modus PC) Opmerking Problemen met de installatie van het LCD-scherm en de oplossingen hiervoor worden in een lijst weergegeven. Q: Het LCD-scherm flikkert. A: Controleer of de signaalkabel tussen de computer en het LCD-scherm goed is aangesloten. (Zie Aansluiten op een computer) Problemen met betrekking tot het scherm Opmerking Hier worden problemen met betrekking tot het LCD-scherm en de oplossingen hiervoor weergegeven.
Problemen oplossen opnieuw in, rekening houdend met de informatie in het LCD-schermmenu en de Voorinstelbare timingmodi. Q: Dubbel beeld. A: Controleer of de resolutie en de frequentie die zijn ingesteld voor de videokaart binnen het bereik vallen dat door het LCD-scherm wordt ondersteund. Zo niet, stel deze dan opnieuw in, rekening houdend met de informatie in het LCD-schermmenu en de Voorinstelbare timingmodi. Q: Het beeld is te licht of te donker. A: Pas Brightness en Contrast aan.
A: Controleer het volumeniveau. A: Als het volume nog steeds te laag is nadat u de bediening op het maximale niveau hebt ingesteld, moet u de volumeregeling op de geluidskaart of in het softwareprogramma van de computer controleren. Q: Het geluidsniveau is te hoog of te laag. A: Stel Treble en Bass in op de gewenste niveaus. Problemen met betrekking tot de afstandsbediening Opmerking In de onderstaande lijst worden problemen met de afstandsbediening en de oplossingen hiervoor behandeld.
Problemen oplossen Opmerking De videokaartondersteuning kan verschillen, afhankelijk van de versie van het gebruikte stuurprogramma. (Raadpleeg de handleiding van de computer of de videokaart voor meer informatie.) Q: Hoe kan ik de resolutie wijzigen? A: Windows XP: Stel de resolutie in via Control Panel (Configuratiescherm) → Appearance and Themes (Vormgeving en thema's) → Display (Beeldscherm) → Settings (Instellingen).
Specificaties Algemeen Algemeen SyncMaster 320MX-2, 320MXn-2 Modelnaam LCD-paneel Formaat 32 " diagonaal (80 cm) Weergavegebied 697,68 mm (H) x 392,3 mm (V) Pixel Pitch 0,51075 mm (H) x 0,51075 mm (V) Synchronisatie Horizontaal 30 ~ 81 kHz Verticaal 56 ~ 85 Hz Kleurweergave 16,7 M Resolutie Optimale resolutie 1360 x 768 bij 60 Hz/1366 x 768 bij 60 Hz, afhankelijk van de grafische kaart die wordt gebruikt Maximale resolutie 1366 x 768 bij 60Hz Ingangssignaal, begrensd RGB analoog, DVI (Digital V
Afmetingen (B x H x D) / gewicht 320MXn-2 780,0 x 482,0 x 109,0 mm (zonder standaard) 780,0 x 545 x 311,0 mm (met standaard) / 15,1 kg (Met optioneel beschermingsglas) 20,6 kg VESA bevestigingsinterface 200 x 200 mm Omgevingsvereisten 320MXn- In bedrijf 2 Opslag Temperatuur: 10˚C ~ 40˚C (50˚F ~ 104˚F) Vochtigheid: 10 % tot 80 %, geen condensvorming Temperatuur: -20˚C ~ 45˚C (-4˚F ~ 113˚F) Vochtigheid: 5 % tot 95 %, geen condensvorming 320MX -2 In bedrijf Temperatuur: 0˚C ~ 40˚C (32˚F ~ 104˚F) Vochtigh
PowerSaver Dit LCD-scherm is voorzien van het ingebouwde energiebeheersysteem PowerSaver. Als het LCD-scherm gedurende lange tijd niet wordt gebruikt, wordt de spaarstand geactiveerd om energie te besparen. Het LCD-scherm gaat automatisch weer normaal werken zodra u op een toets op het toetsenbord drukt. Om energie te besparen, kunt u het beste het LCDscherm uitschakelen wanneer u dit gedurende langere tijd niet gebruikt.
Specificaties PowerSaver (bij gebruik als netwerkscherm) Toestand Normale werking Energiebes- Uitschakelen Uitschakelen paringsmodus (Aan/uit-knop) (Aan/uit-schakelaar) Aan/uit-lampje Aan Knipperend Aan Uit Vermo- 320MXngensop- 2 name 200 W minder dan 5 W 5W 0W PowerSaver (bij gebruik als normaal LCD-scherm) Toestand Normale werking Energiebes- Uitschakelen Uitschakelen paringsmodus (Aan/uit-knop) (Aan/uit-schakelaar) Aan/uit-lampje On (Aan) Knipperend On (Aan) Knipperend Vermo- 320MX-
Specificaties Horizontale frequentie De tijd die nodig is om één lijn horizontaal van de linker- naar de rechterrand van het scherm te scannen, wordt de Horizontal Cycle (Horizontale cyclus) genoemd. Het omgekeerde van deze Horizontal Cycle is de Horizontale frequentie. Eenheid: kHz Verticale frequentie Net als een TL-lamp moet het scherm hetzelfde beeld vele malen per seconde herhalen om een beeld voor de gebruiker weer te geven.
Informatie Voor betere weergave Stel voor een optimale beeldkwaliteit de resolutie en de vernieuwingsfrequentie van de computer in volgens de onderstaande instructies. De beeldkwaliteit kan instabiel zijn als deze niet optimaal wordt ingesteld voor TFT-LCD. • Resolutie: 1360 x 768 • Verticale frequentie (vernieuwingsfrequentie): 60 Hz De TFT-LCD-panelen die voor dit product worden gebruikt, zijn gefabriceerd met geavanceerde halfgeleidertechnologieën met een precisie van 1ppm (een miljoenste) of hoger.
Informatie Uitschakelen, schermbeveiliging of energiebesparende modus • Schakel de monitor 4 uur uit nadat deze 20 uur achter elkaar in gebruik is geweest. • Schakel de monitor 2 uur uit nadat deze 12 uur achter elkaar in gebruik is geweest. • Stel de monitor in op uitschakelen met Power Scheme (Energiebeheerschema) in Display Properties (Eigenschappen beeldscherm) van de computer. • Gebruik indien mogelijk een schermbeveiliging. Schermbeveiliging in één kleur of een bewegend beeld wordt aanbevolen.
Informatie Wissel elke 30 minuten af met twee kleuren. • Vermijd een combinatie van tekens en achtergrondkleur met een groot verschil in helderheid. Vermijd grijze kleuren. Deze kunnen gemakkelijk scherminbranding veroorzaken. Vermijd: kleuren met een groot verschil in helderheid (zwart en wit, grijs). De kleur van de tekens regelmatig wijzigen • Gebruik heldere kleuren met weinig verschil in helderheid. - Cyclus: Wijzig elke 30 minuten de kleur van de tekens en de achtergrond.
Informatie - Methode selecteren • Gebruiksaanwijzingen: OSD-menu -> Instellen -> Veiligheidsscherm -> Schermverschuiving. • Time Interval (Tijdsinterval): 1 ~ 10 uur (aanbevolen: 1 ) • Tijdsduur: 1 ~ 5 seconden (aanbevolen: 5 ) Opmerking (Raadpleeg het gedeelte 'OSD-functie' in de gebruikershandleiding op de cd. Voor sommige modellen is dit niet beschikbaar.
Informatie Opmerking (Raadpleeg het gedeelte 'OSD-functie' in de gebruikershandleiding op de cd. Voor sommige modellen is dit niet beschikbaar.) ) De schermwisfunctie van het product toepassen • De schermwisfunctie toepassen - Symptoom: 2 verticale blokken bewegen terwijl het scherm wordt gewist. - Methode selecteren • Gebruiksaanwijzingen: OSD-menu -> Instellen -> Veiligheidsscherm -> Wisser.
Bijlage Contact Samsung wereldwijd Opmerking Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx Latin America ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.
Bijlage Europe BELGIUM 02 201 2418 http://www.samsung.com/be (Dutch) http://www.samsung.com/ be_fr (French) CZECH REPUBLIC 800 (800-726786) SAMSUNG http://www.samsung.com/cz DENMARK 8 - SAMSUNG (7267864) http://www.samsung.com/dk EIRE 0818 717 100 http://www.samsung.com/ie FINLAND 30 - 6227 515 http://www.samsung.com/fi FRANCE 01 4863 0000 http://www.samsung.com/fr GERMANY 01805 SAMSUNG http://www.samsung.de (7267864, € 0,14/Min) HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.
Bijlage Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858 http://www.samsung.com/cn 400-810-5858 010-6475 1880 INDIA HONG KONG:3698 - 4698 http://www.samsung.com/hk 3030 8282 http://www.samsung.com/in 1-800-3000-8282 1800 110011 INDONESIA 0800-112-8888 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com/jp MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG(0800 726 http://www.samsung.
Bijlage zontal Cycle (Horizontale cyclus) genoemd. Het omgekeerde van deze Horizontal Cycle is de Horizontale frequentie. Eenheid: kHz Interlace en Non-Interlace methoden De achtereenvolgende weergave van boven naar beneden van de horizontale lijnen in het scherm wordt de Non-Interlace methode genoemd. Bij de Interlace methode worden eerst oneven en dan even lijnen weergegeven. Voor een optimale beeldkwaliteit wordt in de meeste monitoren gebruik gemaakt van de Non-Interlace methode.
Bijlage Correcte verwijdering van dit product (elektrische & elektronische afvalapparatuur) elektronische accessoires mogen niet met ander bedrijfsafval voor verwijdering worden gemengd. Correcte behandeling van een gebruikte accu uit dit product Dit merkteken op de accu, handleiding of verpakking geeft aan dat de accu in dit product aan het einde van de levensduur niet samen met ander huishoudelijk afval mag worden weggegooid.