SyncMaster 400FX,400FXn LCD Monitor User Manual Downloaded From TV-Manual.
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment.
Safety Instructions Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product. • Otherwise, this may result in damage to the product due to electric shock.
Safety Instructions Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the internal temperature. When putting the product down, make sure to put it down softly. • Otherwise, this may result in damage to the screen display. Do not place the front of the product on the floor. • Otherwise, this may result in damage to the screen display. Ensure that an authorized installation company installs the wall mount.
Safety Instructions When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it softly with a dry cloth. • (Do not use chemicals such as wax, benzene, alcohol, thinner, mosquito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indication labels on the product.
Safety Instructions Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable. Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable.
Safety Instructions Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces the weariness of your eyes. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/or damage the product. • If you use the product in a location exposed to vibrations, it may damage the product and result in fire.
Safety Instructions Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater. • This may reduce the lifetime of the product, and may result in fire. Do not drop any objects onto the product or cause any impact to the product. • Otherwise, this may result in electric shock or fire. Do not use a humidifier or kitchen table near the product. • Otherwise, this may result in electric shock or fire.
Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type. Unpacking LCD Display Manuals Quick Setup Guide Warranty Card (Not available in all locations) Cables D-Sub Cable Power Cord Others 8 Downloaded From TV-Manual.
Introduction Others Remote Control Batteries (AAA X 2) HDD Cover (Not available in all locations) Sold separately DVI Cable Wall Mount KIT LAN Cable (Applicable to the FXn model only) TV tuner box NetWork Box Semi Stand KIT (Applicable to the FX model only) Note • You can purchase and connect a separate network box or TV tuner box. For information on how to use these, refer to their respective user manuals. • You can only connect one external box.
Introduction MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, push the button to adjust volume.
Introduction POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (PC/DVI/HDMI Audio Connection Terminal (Input)) DVI / PC / HDMI IN [HDMI] Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable.
Introduction DC POWER OUT [Power] Connect this to the POWER connector of a TV tuner box or network box. AV IN [VIDEO] (VIDEO Connection Terminal) Connect the [ VIDEO ] terminal of your monitor to the video output terminal of the external device using a VIDEO cable.
Introduction Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. Note The location of the Kensington Lock may be different depending on its model.
Introduction POWER OFF Number Buttons DEL button + VOL MUTE TV/DTV MENU INFO Color Buttons TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP 1. POWER Turns the product On. 2. Off Turns the product Off. 3. Number Buttons Press to change the channel. 14 Downloaded From TV-Manual.
Introduction 4. DEL button The "-" button operates only for DTV. It is used to select MMS (multi-channel) for a DTV. 5. + VOL - Adjusts the audio volume. 6. Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode. MUTE 7. TV/DTV Selects the TV and DTV mode directly. 8. Opens the on-screen menu and exits from the menu or closes the adjustment menu.
Introduction 24. Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 25. EXIT Exits from the menu screen. 26. SRS Selects SRS TruSurround XT mode. 27.MagicInfo MagicInfo Quick Launch Button. 28. P.MODE When you press this button, current picture mode is displayed on the lower center of the screen. AV / HDMI / TV : P.MODE The LCD Display has four automatic picture settings that are preset at the factory.
Introduction LCD Display Head 17 Downloaded From TV-Manual.
Introduction Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and install the bracket. • At least 2 persons are needed in order to move the LCD Display.
Introduction Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Introduction When done, mount the wall bracket on the wall. There are two hinges(left and right). Use the correct one. 2. A- Captive Screw B- Wall Bracket C- Hinge (Left) D- Hinge (Right) Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length. A- 3.
Introduction To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice 3. • Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. • Be careful when installing the product on the bracket as fingers can be caught in the holes.
Introduction 4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A- LCD Display B- Wall Bracket C- Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2.
Introduction Make sure to use the top center, and not the leftor the right side of the product to adjust the angle. 23 Downloaded From TV-Manual.
Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When unwiring the earth lead, make sure to disconnect the AC power in advance. Note AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display.
Connections Connect the audio cable for your LCD Display to the audio port on the back of your computer. Note • Turn on both your computer and the LCD Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power.
Connections Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display . 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display . 3.
Connections Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable. • Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the DVI / PC / HDMI AUDIO IN terminal of the LCD Display.
Connections Note Connect the LAN cable. (Applicable to the FXn model only) Connecting a USB device Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When unwiring the earth lead, make sure to disconnect the AC power in advance. Note AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display.
Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic) 1.
Using the Software Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click 3. Click "Personalization" and then "Display Settings". 4. Click "Advanced Settings...". 5. Click "Properties" in the "Monitor" tab.
Using the Software Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer". 8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK".
Using the Software 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft® Windows® XP Operating System 32 Downloaded From TV-Manual.
Using the Software 1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button. 6. Select "Don't search, I will..." then click "Next" and then click "Have disk". 33 Downloaded From TV-Manual.
Using the Software 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9.
Using the Software 10. Monitor driver installation is completed. Microsoft® Windows® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" icon. 3.
Using the Software 4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area. 6. Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location..." then click "Next" button. 8. Click the "Have Disk" button. 9. Specify A:\(D:\driver) then click "OK" button. 10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK". 11.
Using the Software Installation MagicInfo Pro Installation 1. Insert CD into the CD-ROM drive. 2. Click the MagicInfo Pro installation file. 3. When the Install Shield Wizard window appears, click "Next." 4. Select "I agree to the terms of the license agreement" to accept the terms of use. 5. You are required to log in to the MagicInfo Pro Server program. Please enter the password to login. The password cannot be changed when you are logged in. 37 Downloaded From TV-Manual.
Using the Software 6. Choose a folder to install the MagicInfo Pro program. 7. Click "Install." 38 Downloaded From TV-Manual.
Using the Software 8. The "Installation Status" window appears. 9. It is recommended restarting the system for the normal operation of the MagicInfo Pro Server program. Click "Finish". 39 Downloaded From TV-Manual.
Using the Software 10. When the installation is complete, the MagicInfo Pro executable icon appears on your desktop. 11. Double-click the icon to start the program. System Requirements Minimum CPU RAM Ethernet OS P1.8 256M 100M/1G Windows XP WMP 9 or Windows later 2000 (Service Pack 4) Recommen- P3.0GHz ded 512M 40 Downloaded From TV-Manual.
Introduction A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume of the selected set within the slider.
Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the display unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power and lock buttons on the remote control and set. 4. The setting for the PC Serial Port can change. The original value is COM1. 5.
1. The Multiple Display Control is originally set to COM1. 2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 4. The selected port is stored in the program and used for the next program as well. Power Control 1. Click Power Control of the main icons and the Power Control screen appears. Downloaded From TV-Manual.
Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control. Power Control allows controlling some of the functions of the selected display. 1) Power On/Off Downloaded From TV-Manual.
- Turns the power of the selected display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the slider. (When you cancel the selection or choose Select All, the value returns to the default value 10) 3) (Mute On/Off) - Turns on/off the Mute function of the selected display. When selecting one set at a time, turn on the Mute function for the selected set.
Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of the selected display to DVI. 4) TV - Changes the Input Source of the selected display to TV. 5) DTV - Changes the Input Source of the selected display to DTV. 6) AV - Changes the Input Source of the selected display to AV.
Info Grid shows some basic information necessary to Image Size Control. 1) ( Power Status) - Shows the power status of the current display. 2) Image Size - Shows the current Image Size of the display in use. 3) Input - Shows the current Input Source of the display in use. 4) Info Grid displays only the displays whose Input Source is PC, BNC, DVI. 5) PC Source - When you click Image Size, the PC Source tab first appear. - The Image Size Control button controls Image Size available for PC, BNC, DVI.
Info Grid shows some basic information necessary to Image Size Control. 1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV. Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source. 3) Switch Image Size of the selected display randomly.
Info Grid shows some basic information necessary to Time Control. 1) Current Time - Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Minute, AM/PM of On Time Setup, Status, Source, Volume of the selected display. 3) Off Time Setup - Set the Hour, Minute, and AM/PM, Status for Off Time Setup of the selected display. 4) Shows the On Time settings. 5) Shows the Off Time settings.
Info Grid shows some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the PIP of the selected display. 3) Large - Turns on the PIP of the selected display and changes the size to Large. 4) Small - Turns on the PIP of the selected display and changes the size to Small. 5) Double 1 - Turns on the PIP of the selected display and changes the size to Double 1.
Info Grid shows some basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC. 4) DVI - Changes the source of the PIP of the selected display to DVI. 5) AV - Changes the source of the PIP of the selected display to AV.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM." 1) Picture - Available only for TV, AV, S-Video, Component, HDMI, DTV.
1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM.
Audio 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each function fetches the value for the set and displays it on the slide bar. When "Select All" is chosen, the default value is displayed. Changing a value in this screen will automatically change the mode to "CUSTOM.
Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the selected display. 5) Auto Adjustment - Self-Adjust to the incoming PC signal. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model.
An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sources. 2) Auto Lamp Control - Automatically adjusts the backlight of the selected display at a specified time. The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 3) Manual Lamp Control - Allows you to adjust the backlight of the selected display regardless of the time.
1) Safety Screen - Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of time. You can set the repeat cycle timer by selecting the "Interval" by hour and "Second" by second. It can be set to Scroll, Pixel, Bar and Eraser by Screen Type. The Input source of MagicInfo works only on MagicInfo model. The Input source of TV works only on TV model.
1) Video Wall - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall (Screen divider) - The screen can be divided into. You can select a number of screens with a different layout when dividing. z Select a mode from Screen divider. z Select a display from Display Selection. z The place will be set up by pressing a number in the selected mode.
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict. - Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu) Note : A Display Set ID must be a value between 0 and 25 . 2. The display you wish to control does not appear on the other Control Info Grids - Check to see if the display power is ON.
What is MagicInfo Pro? | Using MagicInfo Pro | Library | Remote Management | Message | Option | Screen Client / Contents Server | Schedule | Troubleshooting What is MagicInfo Pro? MagicInfo Pro uses an Ethernet network for servers and monitors, and transfers media files (image files, music files, and movies) and office files (HTML, PDF) from the server to the monitors over the network.
schedules. 5. Instants message → You can display a message on selected monitors regardless of schedules. 6. MDC and System → The MDC and System functions allow you to control, view the status of, and diagnose monitors. 7. VNC → The VNC function allows you to connect to a monitor remotely and view the status of and control and diagnose it. 8. Update and PXE → The Update function allows you to easily update the programs on the monitor. The PXE allows you to recover the operating system image for a monitor.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Using MagicInfo Pro Running MagicInfo Pro 1. Click Programs -> MagicInfo Pro -> MagicInfo Pro. 2. When MagicInfo Pro runs, select Log In from the File menu. 3. Enter the user name and password and click OK.
2. Configure the Network Connection settings In the General tab. Enter the server name on the monitor identical to the name of the server. To change the server name, double-click the Value field of the Server Name item. 3. If there is more than one network card in the server, select a network card in the Network Device item. 4.
MagicInfo in the OSD pages.) 2. A message is displayed to notify that the monitor is successfully connected to the server. File Sub-Menus Registering a Library 1. Select Library from the File menu to open the Library View. 2. Select a photo file, music file, movie file, document, or Flash file etc. on the server. 3. Right-click on the selected file and select Send To Library from the displayed menu to register it to the library. Downloaded From TV-Manual.
4. The registered library files are used by the monitor when the Operating Mode of the monitor is set to Player or is used when registering a screen. Registering a Screen 1. Select Screen from the File menu to open a Screen View. 2. Right-click on the background view. Click on the Area and click either Photo, Movie, Flash, Web, Text, or Source from the displayed menu. 3. When the mouse pointer changes to the crosshair (+) icon, drag it to the Edit View to set the area for the file to be displayed. 4.
5. Repeat steps 2 to 4 to register other areas on a screen. 6. After finishing registering areas, select Save from the File menu to save the screen. 7. Register a schedule to display the saved screen on a monitor(s). Registering a Schedule 1. Select Schedule from the File menu to open the Schedule View. 2. Select the monitors to which the schedule is to be registered in the Tree View at the left.
4. If you want to change the date or time of the schedule, drag it to a different date or time. 5. Select Publish from the Tools menu. Select the checkbox next to the monitors for which you want to register the selected schedule. Sending a Message 1. Select Message from the File menu to open the Message View. 2. Select the checkbox next to the monitors for which you want to register a message. 3. Configure the settings for the message in the List View at the bottom right.
Downloaded From TV-Manual.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Library File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and have basic control over the monitors from the server. Close z Closes the screen view you are working in.
Tools Menu Synchronize z Synchronizes the library files of the main server with the files of the content server. Option z Changes the server settings. For more information, refer to the Options section. Library Downloaded From TV-Manual.
Tree View List View Output View Tree View All the folders under My Computer on the Windows Desktop, library, screen, and content server are displayed in a tree view. If you select a folder, its subfolders and a list of files in it are displayed in the list view in the right pane. Exploring Normal Files Exploring Libraries Exploring Screen Files Exploring Content Servers Exploring Normal Files Displays all the folders in the computer on which a server is installed in a tree view.
Displays the screen management folders created with the Screen menu in a tree view. Function: Displays the subfolders and screen files below the selected folder in the list window on the right by selecting a folder. Hot Key z F2 key: Renames the selected folder. z Delete key: Deletes the selected folder, its sub folder(s) and all the files in the selected folder and subfolders. Drag & Drop z Screen File: If you drag and drop screen files in the list view, they are moved to that folder.
z Double-click to move to the upper folder. z Double-click to move to the lower folder. z Double-click a file to run the file. Drag & Drop z If you drag and drop a file from the list view into a library, it is registered to that library. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are moved to that folder. If you click Open for a file, the file is run.
z If you drag and drop library files into a library folder in the tree view or list view, they are moved to that folder if the content types of both the library files and the library folder are the same. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are moved to that folder. If you click Open for a file, the file is run. z Send To Library: Moves the selected library files to the topmost folder for each content item.
- Comments : Comments entered by the user for the selected library file. You can edit them. z New Folder: This menu item is only activated when neither a folder nor a file is selected. If you select this menu item, a new folder is created. However, it is deactivated when a library or office folder is selected in the tree view. Hot Key z F2 key: Renames the selected folder. However, you cannot rename a file. z Delete key: Deletes the selected folders, subfolders, and library files.
z If you drag and drop screen files to a screen folder in the tree view or the list view, they are moved to that folder. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are moved to that folder. However, this menu item is deactivated when a screen file is selected. z Rename: Renames the selected folder. However, this menu item is not supported for a screen file. z Delete: Deletes the selected screen files and folders.
- Name: The name of the selected screen Location : The location where the selected screen is registered Size : The size of the selected screen Resolution : The resolution of the selected screen Duration : The playing time of the selected screen Date Modified : The date when the selected screen was last modified Target : The real location of the selected screen. Comments : Comments entered by the user for the selected screen. You can edit them.
Displays the subfolders and content servers below the selected folder. Function: Double-Click z Double-click z Double-click to move to the upper folder. to move to the lower folder. Drag & Drop z If you drag and drop content servers to a content server folder in the tree view or the list view, they are moved to that folder. However, the drag & drop function is not supported for folders. Context Menu z Open: If you click Open for a folder, you are moved to that folder.
1) Mac Address: The MAC address of the selected content server. You can edit this. 2) Server Name: The server name of the selected content server. You can edit this. 3) IP Address: The IP address of the selected content server. You cannot edit this. * The IP address is displayed if the content server is connected at least once. 4) Comments: Comments about the selected content server. 5) History : Displays the synchronization history records for the content server.
Hot Key z Ctrl + C: Copies the selected message to the clipboard so that you can paste it to another location. Downloaded From TV-Manual.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Screen File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and performs basic control for the monitors from the server. Create Workspace z Creates a new screen view to design more than one screen view.
accounts that can be created: Administrator and User Accounts { Administrator: Has privileges for all server functions. { User: Has privileges for all server functions except for changing server options and user account features. Exit z Exits the program. If there are any unsaved changes, a new window is displayed so that you can save them. Tool Menu Undo / Redo z Cancels the previously performed command or performs the canceled command again.
Screen Tree View Edit View List View Tree View A tree is created in accordance with the order of the areas created in the Edit View. You can check the area currently selected in the Edit View using the Tree View. If you select a property of an area, the detailed property information is displayed in the List View. Context Menu Downloaded From TV-Manual.
z New: Initializes the screen view you are currently working with. If there are any unsaved changes, a new window is displayed so that you can save them. z Open: Opens a screen file. If there are any unsaved changes, a new window is displayed so that you can save them. z Save / Save As: Saves the changes in the current screen file or as a new screen file. z Order: Changes the order of the currently selected area. The source area is always at the topmost position.
Name: Changes the background name. You cannot use a name already used for another area name. Resolution: Changes the resolution for the background. You can add a new resolution and set the default resolution using the Options menu. Start Time, Stop Time, Duration: Sets the playing time of the background in minutes. The playing time of the background changes to that of the screen. It cannot be less than the playing time of the area contained in the background.
z Tile: The photo file is tiled continuously across the entire background. Time Interval: Sets the slide show time between photo files when the background type is set to Photo File. Office File: Selects the office files when the background type is set to Office File. You can create the background using a Power Point, Excel, Word, or PDF file. The office file used is not configured as an area and is just displayed in Full mode in the background.
Sound: Turns the background sound on or off. Music File: Selects a music file for the background. Volume: Controls the volume of the background music. Repeat: A music file can be played repeatedly. When set to Repeat, the music file is played repeatedly while the background is created. Effect Effect: Selects the type of effect to be applied when the background is created. z z z z None: No effect is used. Slide: The background is created while it is moving. Block: The background is created with blocks.
Photo This function is for configuring screens using photo files and consists of the Area, Screen, Background, Effect functions. The Area function allows you to set the position where the photo is displayed and when and for how long it is displayed. The Screen function allows you to select photo files and how to display them. The Background function allows you to set the background image and music when the photo is displayed. The Effect function allows you to set an effect for when the background changes.
Screen Photo File: Selects a photo file to play in the Photo area. Aspect Ratio: Selects the aspect ratio for the photo files to be played in the Photo area. z Full: The photo file is enlarged or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z Auto: The photo file is enlarged or reduced to fit the entire background and keeps the original aspect ratio. z Tile: The photo file is tiled continuously across the entire background.
Picture File: Selects the photo file when the background type for the Photo area is set to Picture File. Picture Aspect Ratio: Selects the aspect ratio for the photo file when the background type of the Photo area is set to Picture File. z Full: The photo file is enlarged or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z Auto: The photo file is enlarged or reduced to fit the entire background and keeps the original aspect ratio.
z Effect: Selects the type of effect to be applied when the Photo area is created. { None: No effect is used. { Slide: The Photo area is created while it is moving. { Block: The Photo area is created with blocks. { Fade In: The Photo Area fades in when it is created. z Effect Speed: Adjusts the speed of an effect being created. z Effect Direction: Sets the direction when the Slide effect is selected. z Effect Size: Sets the size of the blocks when the Block effect is selected.
Name: Changes the area name. You cannot use a name already used for another area name. Lock Position: Locks the position of the area. Left, Top, Width, Height: Changes the position and size of the area. The area positions must be within the background and the area size cannot be larger than the background size. Start Time, Stop Time, Duration: Sets the playing time in seconds. It cannot be longer than the background playing time. Screen Movie File: Selects the movie file to be played in the Movie area.
Movie Repeat: A movie file can be played repeatedly. When set to Repeat, the movie file is played repeatedly while the background is created. Background Type: Sets the background type (Color, Picture File) for the Movie area. Color: Selects the color when the background type for the Movie area is set to Color. Transparency: Selects the degree of transparency when the background type for the Movie area is set to Color.
Changes the detailed properties and the transfer mode for the selected file of each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. z Context Menu: Add, Delete, Up, Down: Adds and deletes a file and changes the playing order. Effect z Effect: Selects the type of effect to be applied when the Movie area is created. { None: No effect is used.
This function is for configuring screens using Macromedia flash files and consists of Area, Screen, Background, Effect functions. The Area function allows you to set the position where the movie is played and when and for how long it is played. The Screen function allows you to set the flash file and how to play it. The Background function allows you to set the background image and music when the flash file is played. The Effect function allows you to set the effect for when the background changes.
Screen Flash File: Selects the flash file to be played in the Flash area. Aspect Ratio: Selects the aspect ratio for the flash file to be played in the Flash area. z Full: The flash file is enlarged or reduced to fit the entire background. z Original: The flash file is displayed at the original size. z Auto: The flash file is enlarged or reduced to fit the entire background, and keeps the original aspect ratio. Input Enable: You can input using the mouse in the Flash area.
Picture Aspect Ratio: Selects the aspect ratio for the photo file to be played in the Flash area when the background type of the Flash area is set to Picture File. z Full: The photo file is enlarged or reduced to fit the entire background. z Original: The photo file is displayed at the original size. z Auto: The photo file is enlarged or reduced to fit the entire background and keeps the original aspect ratio. z Tile: The photo file is tiled continuously across the entire background.
z Effect: Selects the type of effect to be applied when the Flash area is created. { None: No effect is used. { Slide: The Flash area is created while it is moving. { Block: The Flash area is created with blocks. { Fade In: The Flash area fades in when it is created. z Effect Speed: Adjusts the speed of an effect being created. z Effect Direction: Sets the direction when the Slide effect is selected. z Effect Size: Sets the size of the blocks when the Block effect is selected.
Name: Changes the area name. You cannot use a name already used for another area name. Lock Position: Locks the position of the area. Left, Top, Width, Height: Changes the position and size of the area. The area positions must be within the background and the area size cannot be larger than the background size. Start Time, Stop Time, Duration: Sets the playing time in seconds. It cannot be longer than the background playing time. Screen Website: Sets a web page to display in the Web area.
Background Type: Sets the background type (Color, Picture File) for the Web area. Color: Selects the color when the background type for the Web area is set to Color. Transparency: Selects the degree of transparency when the background type for the Web area is set to Color. If the Transparency is set to a value under 100, the area which is placed beneath the present area is shown transparently. However, if a Movie is playing in one of the areas, the transparency doesn't affect the movie area.
Changes the detailed properties and the transfer mode for the selected file of each type. z Transfer Mode: Changes the mode in which the selected file is transferred to the monitor. z Download: Downloads the file to the monitor and plays it. z Stream: Streams the file to the monitor. z Context Menu: Add, Delete, Up, Down: Adds and deletes a file and changes the playing order. Effect z Effect: Selects the type of effect to be applied when the Web area is created. { None: No effect is used.
This function is for configuring screens by connecting text and consists of the Area, Screen, Background, Effect functions. The Area function allows you to set the position of the text and when and for how long it is displayed. The Screen function allows you to select the text and how to display it. The Background function allows you to set the background image and music when the text is displayed. The Effect function allows you to set the effect used when the background changes.
Text: Sets the text to be displayed in the Text area. Direction: Sets the direction of the text flow in the Text area. z z z z z None Right to Left Left to Right Top to Bottom Bottom to Top Text Speed: Sets the speed of the text flow in the Text area. Step: Sets the interval of the text flow in the Text area. Font, Font Size, Italic, Bold, Underline, Strikeout, Font Color: Sets the formatting for the text in the Text area. The font type shows the font of the computer where the server is operating.
Color: Selects the color to use when the background type for the Text area is set to Color. Transparency: Selects the degree of transparency to be used when the background type for the text area is set to Color. If the Transparency is set to a value under 100, the area which is placed beneath the present area is shown transparently. However, if a Movie is playing in one of the areas, the transparency doesn't affect the movie area. Sound: Turns the background sound for the Text area on or off.
z Effect: Selects the type of effect to be applied when the Text area is created. { None: No effect is used. { Slide: The Text area is created while it is moving. { Block: The Text area is created with blocks. { Fade In: The Text area fades in when it is created. z Effect Speed: Adjusts the speed of an effect being created. z Effect Direction: Sets the direction when the Slide effect is selected. z Effect Size: Sets the size of the blocks when the Block effect is selected.
Name: Changes the area name. You cannot use a name already used for another area name. Lock Position: Locks the position of the area. Left, Top, Width, Height: Changes the position and size of the area. The area positions must be within the background and the area size cannot be larger than the background size. Start Time, Stop Time, Duration: Sets the playing time in seconds. It cannot be longer than the background playing time. Screen Source List: Selects the source to be played in the Source area.
Edit View This view is used for screen design and allows you to create, move and change the size of an area using your mouse. You can preview the current state by selecting Preview Area from the context menu or double-clicking on an area. Context Menu z Area: Selects the type of area you wish to create. You can create an area by dragging and dropping it into the Screen Edit window. More than one Source Area cannot be played at the same time.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Schedule File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and performs basic control for the monitors from the server.
Tool Menu Undo / Redo z Cancels the previously performed command or performs the canceled command again. You can change the maximum number of commands that you can undo using the Option menu. Add z Adds the screen you wish to schedule after selecting a monitor and time by clicking in the EPG window. Delete z Deletes the screen currently selected in the EPG window. Copy / Paste z Copies the currently selected screen and pastes it after selecting a monitor and time by clicking in the EPG window.
Schedule Tree View EPG View List View Publish View Tree View Displays the connection state of the monitors currently connected to the server depending on the monitor icon. You can also efficiently manage the monitors by creating network groups. You can move a networked monitor by dragging and dropping it into a group. z z z z : : : : The The The The server server server server Network Downloaded From TV-Manual.
Network: A monitor which is connected to the server over a network. New Group: Creates a new group that can include some networked monitors. You can drag and drop a networked monitor to a group. Copy/Paste: Copies all the schedules configured on the selected monitor to the clipboard and pastes them to another monitor. Rename: Changes the name of a monitor connected to the server. You cannot use a name already used for another monitor. Delete: Deletes a monitor which is not connected to the server.
This is a virtual monitor used to create schedules for a monitor used without being connected to the network. Local publishing can be performed for a local monitor to create schedules for it. New Monitor: Creates a new virtual local monitor. Copy / Paste: Copies the schedules set on the selected monitor and pastes them to another monitor. Rename: Renames the selected monitor. You cannot use a name already used for another monitor. Delete: Deletes the selected monitor.
Add: Adds the screen you wish to schedule after selecting a monitor and time by clicking in the EPG window. Delete: Deletes the screen currently selected in the EPG window. Copy / Paste: Copies the currently selected screen and pastes it after selecting a monitor and time by clicking in the EPG window. Auto Size: Changes the currently selected screen in accordance with the time of the background set when editing automatically. Time Combo Box: Changes the unit of the time axis to be currently displayed.
Name: Changes the name of the selected screen. Only the screen name changes and the time information is retained. Start Time / Stop Time / Duration: Sets the time information for the selected screen in minutes. Periodic: Sets how frequently the selected screen recurs. (None / Daily / Weekly / Monthly) End on: Sets an end date for the selected schedule to recur. Publish View Publishes the schedules which are configured by the EPG view and the List view to the checked monitors.
What is MagicInfo Pro? | Using MagicInfo Pro | Library | Message | Option | | Remote Management Screen Client / Contents Server | Schedule | Troubleshooting Remote Management File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can perform a screen schedule and have basic control over the monitors from the server. Close z Closes the screen view you are working in.
Tools Menu Refresh z Refreshes the value of each client for the currently selected remote control item. Option z Changes the server settings. For more information, refer to the Options section. Remote Management Tree View List View Combo View Downloaded From TV-Manual.
Tree View Displays various control items for the client in a tree view. If you select an item, the current state of the selected item is displayed and you can control it in the list view. MDC Displays the items for which remote management is required from among the OSD menus of each client monitor in a tree view. If you select an item, the current state of the selected item is displayed and you can control it in the list view.
1) Hour: Enter the hour. 2) Minute: Enter the minutes. 3) AM/PM: Enter AM or PM. -On Timer 1) 2) 3) 4) 5) 6) Hour: Enter the hour. Minute: Enter the minutes. AM/PM: Enter AM or PM. Status: Select whether to use the turn-on time. Source: Select the external input Volume: Select the volume -Off Timer 1) 2) 3) 4) Hour: Enter the hour. Minute: Enter the minutes. AM/PM: Enter AM or PM. Status: Select whether to use the turn-on time. PIP: Displays the PIP information. You can control it in the list view.
System Displays the items required to manage the client in the tree view separately from MDC. If you select an item, the current state of the selected item is displayed and you can control it in the list view. Detailed Items System: Displays the product information for the client in a list view. General: Displays general information for the client, such as the computer name and username, etc. in the list view.
mode. z The Color Temperature item is only applicable if the Color Tone item is turned off. z The Auto Wide option for the Size item is only available in TV mode. (Only applicable for monitors that support TV.) Picture PC: Displays the current state of MagicBright, contrast, brightness, color tone, red, green, blue, color temp, and size. You can control each item including Auto Adjustment by clicking it and changing the setting in the list view.
3) Type: Enter the type of screensaver. z Video Wall 1) Video Wall: Select whether to activate the video wall. 2) Horizontal: Set how many parts the screen is divided into horizontally. 3) Vertical: Set how many parts the screen is divided into vertically. 4) : Select the area that the monitor will display. z The Screen Settings only operate when the Screen Matrix Display function is activated.
System Displays the items required to manage the system properties of the client in a tree view. You have to set the settings for each item by double-clicking the client or using the Edit item from the context menu, instead of selecting each item and setting a value as in MDC. Detailed Items System: Displays the information for the model name, serial number, screen size, firmware version, MagicInfo Pro version, and OS image version.
1) Current Status: Displays the current EWF status of the selected client. 2) EWF command: Changes the EWF status of the selected client. 3) Screen Rotation: Selects the screen direction of the selected client. 4) Screen Resolution: Displays the resolution of the selected client. 5) System message: Selects whether to display a system message for the selected client. 6) The Current Status and Screen Resolution items cannot be changed.
Context Menu Update: This item is only enabled if a monitor name is selected. This item compares the client version to the update version on the server and updates the client if required. Edit: Displays a window so that you can change the monitor settings. z For the System, General, and Performance items, the settings are read-only so they are disabled. Copy: Copies the settings of the selected item. z z z z z If you select a monitor name and click Copy, all the items displayed in the list are copied.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Message File Menu Library / Screen / Schedule / Remote Management / Message z Creates a view or selects a created view for each menu item so that you can run a screen schedule and perform basic control for the monitors from the server. New z Initializes the message view you are currently working with.
user account features. Exit z Exits the program. If there are any unsaved changes, a new window is displayed so that you can save them. Tool Menu Undo / Redo z Cancels the previously performed command or performs the canceled command again. You can change the maximum number of commands that you can undo using the Option menu. Send / Stop z Checks the edited message data in a tree view and sends (or stops) them to the selected monitor. Option z SChanges the server settings.
Tree View List View Tree View You can select the monitors to which the message is sent by checking the checkbox next to each monitor and group. List View Changes the detailed functions for the message to be sent to the monitors by double-clicking it or by clicking the created button. Message: Sets a message to be displayed on the monitor. The set message is not applied to the preview window. Duration: Selects the time of the message to be displayed on the monitor in minutes.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Option Option General Network Connection: Selects the connection method between the server and the monitor. The server and monitor can be connected to each other only if the same connection method is used. z Automatic connection: The monitor automatically connects a server on the same network. Downloaded From TV-Manual.
z Direct connection: The monitor directly connects to the server with the specified IP address. If the server and monitor are on a different private network, they cannot connect to each other. However, if the server has a public IP address, a monitor with a private IP address can be connected to it using the direct connection method. Server Name: Changes the server name. The server and monitor can connect to each other only if their server names are the same.
z Use the available disk space of each monitor: Sets the size to the maximum free disk space of the monitor. z Use the equal disk space of each monitor: Sets the size to the value entered in the edit box. z Do not check disk space when schedule is published: Publishing continues even though the total size of the schedules to be published is larger than that of the free disk space of the monitor. Publishing sequence: Specifies the order when publishing is performed for multiple monitors.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Screen | Schedule Message | Option | Client / Contents Server | Troubleshooting | Contents Server A program run on the additional PC where the content server is operating. Version: The version of the content Server. MAC ID: The MAC address of the network device on the PC where the content server is installed. Used when the MagicInfo Pro Server checks whether it is registered as the content server.
EWF Displays or changes the drive settings. Password Manages the password. Setup Rotation Rotates the screen with the selected option. Program Runs or exits the program. Exit Exits mnMain. If you exit mnMain, MagicInfo Pro and the Schedule program are also exited together. EWF: Displays and changes the Drive settings EWF State z Current state: Displays the current EWF state. z Boot command: Displays the EWF state which will be applied at the next boot-up.
Old password z Enter the existing password. New password z Enter the new password. Change z Change the password. Use password lock z Verifies your password before you enter the Setup screen. Setup Connection Tab Schedule server z Server Connection Settings { The client automatically connects to the server. { When a connection is disconnected, the client connects to another server automatically. { The client connects to the server manually. (Enter the IP address of the server).
{ The ID of the server to connect to { Client ID 1 Schedule server z Automatic connection using server name : If the schedule server and client are on the same sub network, the client connects to the servers using their name. z Reconnecting another server when disconnected : If a connection is disconnected, the client connects to another server on the same sub network automatically. z Direct connection using IP address : The client connects to the schedule server with the entered IP address.
z Select the program performed when the client starts. Automatic updates z Select how to perform automatic updates. 1 Startup z Sets the program to be performed when the client starts. z You can select one of two programs, or select neither of them. z Player: Runs a media player program that can be run using the remote control and can receive and play the content that exists on the server. (MagicInfo Pro) z Runs the program that displays the information.
{ Background: Sets the background for the entire screen. { File: Sets the logo screen to be displayed on the background. (A flash, photo, or movie file can be set.) 2 Schedule folder z Sets the directory which the content to be scheduled is downloaded to and managed in and manages the size of the disk. { Target: Sets the target directory. (You should set a directory on the D: drive or a removable disk, as the C: drive is used for the system.) { Space: Sets the disk size limit used for the schedule.
What is MagicInfo Pro? | Remote Management Using MagicInfo Pro | Library | Message | Option | | Screen Client / Contents Server | Schedule | Troubleshooting Troubleshooting When a monitor is not connected to the server z Check whether the network environment for the server and monitor is normal..
When the monitor update function does not work Check the monitor version. If it is the latest version, no updating is performed. When a movie file is not registered to the library Check whether the proper codec is installed for the movie file the server wants to register to the monitor. If more than one codec of the same type has been installed or an incomplete codec is installed on the PC, it may cause a problem.
MagicInfo Pro 소개 | Screen Design | Message | Schedule | Library Remote Management | Option | 문제해결 | 일반사양 | 프로그램 제거 프로그램 제거 MagicInfo Pro는 Windows 프로그램 추가/제거 옵션을 사용하거나 프로그램 설치시 추가되는 메뉴를 통해 제거할 수 있습니다. MagicInfo Pro를 제거하려면 다음 단계를 수행하십시오. 1. 시스템 트레이에서 [시작] 메뉴로 이동하고 [설정]을 선택한 다음 메뉴에서 [제어판]을 선택합니다. 2. Windows XP의 경우 [시작] 메뉴에서 [제어판]을 선택합니다. 3. 제어판에서 [프로그램 추가/제거] 아이콘을 엽니다. 4. [추가/제거] 창에서 아래로 스크롤한 다음 MagicInfo Pro를 클릭하여 강조 표시합니다. 5. [변경/제거]를 클릭하여 제거합니다. 6. "예"를 클릭하여 MagicInfo Pro의 제거를 시작합니다. 7.
Adjusting the LCD Display Input Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed in the FX or FXn model. Source List MENU → ENTER → → , → ENTER → → ENTER Use to select PC, DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. HDMI 5.
Adjusting the LCD Display Edit Name MENU → ENTER → → , → → ENTER → → ENTER Name the input device connected to the input jacks to make your input source selection easier. 1. PC 2. DVI 3. AV 4. HDMI Picture [PC / DVI / MagicInfo] Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed in the FX or FXn model.
Adjusting the LCD Display MagicBright is a feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of the four settings by simply pressing the MagicBright control button. (Not available in Dynamic Contrast mode of On.) 1.
Adjusting the LCD Display → , → ENTER Adjusts the Brightness. Sharpness MENU → → , → ENTER → → → ENTER → → → → ENTER → → ENTER Adjusts the Sharpness. Color Tone MENU → → , → ENTER → → → →ENTER → → ENTER The color tones can be changed. (Not available in Dynamic Contrast mode of On.) 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.
Adjusting the LCD Display Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode. Red MENU → → , → ENTER → → → → → ENTER → → ENTER → → ENTER Green MENU → → → , → ENTER → → → → → ENTER → → → ENTER → ENTER Blue MENU → → ENTER → ENTER → → , → → → → ENTER → → → → → ENTER Color Temp. MENU → → , → ENTER → → → → → ENTER → → ENTER Color Temp. is a measure of the 'warmth' of the image colors.
Adjusting the LCD Display MENU → → ENTER → MENU → → → ENTER → → → → → → ENTER → Coarse → , → → → → → ENTER → → ENTER → ENTER Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine MENU → → ENTER → → → , → → → → → ENTER → → → ENTER → ENTER Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).
Adjusting the LCD Display (Available in PC mode only) (Not available in Dynamic Contrast mode of On.) Note The direct button on the remote control is the 'AUTO' button. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. → ENTER → MENU → → → → → → → → ENTER → (Available in PC mode only) (Not available in Dynamic Contrast mode of On.
Adjusting the LCD Display 3. B-Gain MENU → → ENTER → → ENTER → → → , 4. → → → → → → → ENTER → → → → ENTER→ → ENTER → ENTER R-Offset MENU → → ENTER → → ENTER → → → , 5. → → → → → → → ENTER → → → → → ENTER→ → ENTER → ENTER G-Offset MENU → → ENTER → → ENTER → → → , 6. → → → → → → → ENTER → → → → → → ENTER→ → ENTER B-Offset MENU → → ENTER → → ENTER → → ENTER → , → → → → → → → ENTER → → → → → → → ENTER → → ENTER Size MENU → → → ENTER , → ENTER → → → → → ENTER The Size can be switched.
Adjusting the LCD Display 1. 16:9 2. 4:3 Dynamic Contrast MENU → → , → ENTER → → → → → → → → → → ENTER → → ENTER Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Picture [ AV / HDMI / TV] Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed.
Adjusting the LCD Display → , → ENTER The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. Dynamic, Standard, Movie, or Custom can be activated. (Not available in Dynamic Contrast mode of On.) 1. Dynamic 2. Standard 3. Movie 4. Custom Note The direct button on the remote control is the 'P.MODE' button. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference.
Adjusting the LCD Display Adjusts the picture Sharpness. Color MENU → → , → ENTER → → → ENTER → → → → → ENTER → → → ENTER → → → → → → ENTER → → → ENTER Adjusts the picture Color. Tint MENU → → → , → ENTER → → ENTER Adds a natural tone to the display. Color Tone MENU → → , → ENTER → → ENTER → → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available in Dynamic Contrast mode of On.) 1. Off 2. Cool2 3. Cool1 4.
Adjusting the LCD Display Color Temp MENU → → , → ENTER → → → → → ENTER → → ENTER Color temp is a measure of the 'warmth' of the image colors. (Not available in Dynamic Contrast mode of On.) Note This function is only enabled if the Color Tone is set to Off. Size MENU → → , → ENTER → → → → → → ENTER → → ENTER The Size can be switched. 1. 16:9 2. Zoom 1 3. Zoom 2 4. 4:3 5. Just Scan (Not available in Dynamic Contrast mode of On.) Note The Zoom1, Zoom2 are not available HDMI.
Adjusting the LCD Display → , → ENTER Turns the Digital Noise Reduction feature Off/On. The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Film Mode MENU → → , → ENTER → → → → → → → → ENTER → → ENTER The Film Mode feature offers you a theater-quality viewing experience. (In HDMI mode, this function can be available when the input signal is interlaced scan; it cannot be available with progressive scan signal.) 1. Off 2.
Adjusting the LCD Display Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Brightness Sensor MENU → → , → ENTER → → → → → → → → → → ENTER → →ENTER Brightness Sensor is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness. 1. Off 2.
Adjusting the LCD Display The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialogue (i.e., news). 5. Custom Selects Custom if you want to adjust the settings according to your personal preferences.
Adjusting the LCD Display → , → ENTER Allows you to Adjusts the sound balance between the left and right speakers. Auto Volume MENU → → , → → ENTER → → → → ENTER → → ENTER Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT MENU → → , → → ENTER → → → → → ENTER → → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
Adjusting the LCD Display • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed in the FX or FXn model. Language MENU → → , → → → ENTER → → ENTER → → ENTER You can choose one of 11 languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.
Adjusting the LCD Display Current Time Setting. Sleep Timer MENU → → , → → → ENTER → → → ENTER → → → ENTER→ → ENTER Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120 6. 150 7. 180 On Timer MENU → → → → ENTER → → → ENTER , / , → → ENTER → → → → ENTER→ Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically.
Adjusting the LCD Display → , → ENTER / , Turns the LCD Display off automatically at a preset time. Menu Transparency MENU → → , → → → ENTER → → → → ENTER → → ENTER Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock PIN MENU → → → → ENTER → → → → → ENTER → → [0∼ 9, 0∼ 9, 0∼ 9, 0∼ 9] → [0∼ 9, 0∼ 9, 0∼ 9, 0∼ 9] → [0∼ 9, 0∼ 9, 0∼ 9, 0∼ 9] The password can be changed.
Adjusting the LCD Display → , → ENTER This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Note If you want to reduce the standby power consumption, set Energy Saving to On. However, when Energy Saving is On, you cannot use the remote Power On function of the MDC and the WOL (Wake On LAN) function of MagicInfo.
Adjusting the LCD Display Note When Video Wall is running, the Auto Adjustment, Image Lock, and Size functions are not available. Video Wall does not operate in MagicInfo mode. Video Wall MENU → → → → ENTER → → ENTER → → , → → → → → → → ENTER → → ENTER Turns Off/On the Video Wall function of the selected display Off/On. 1. Off 2. On Format MENU → → → → ENTER → → → ENTER → → , → → → → → → → ENTER → → ENTER The Format can be selected to see a divided screen. 1.
Adjusting the LCD Display → , → ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5. Vertical MENU → → → → ENTER → → → → → ENTER → → , → → → → → → → ENTER → → ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU → → → → ENTER → → → → → → ENTER → → → → → → → → ENTER → The screen can be divided into several images.
Adjusting the LCD Display Safety Screen The Safety Screen function is used to prevent afterimages that may appear when a still picture is displayed on the screen over a long time. • The Safety Screen function scrolls the screen for the specified period of time. • This function is not available when the power is turned off.
Adjusting the LCD Display Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time MENU → → → → ENTER → → ENTER → → → → → → → → → → → ENTER → → → ENTER → → , → ENTER Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer MENU → → → → ENTER → → → ENTER → → → → → → → → → ENTER → → ENTER → → , → ENTER You can set the timer for Screen Burn Protection.
Adjusting the LCD Display You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser Period MENU → → → → ENTER → → → ENTER → → → → → → → → → ENTER → → → → ENTER → [Period] → , → ENTER Use this function to set the execution period for each mode set in the timer. Time MENU → → → → ENTER → → → ENTER → → → → → → → → → → → ENTER → → → ENTER → → , → ENTER Within the set period of time specify a time for execution.
Adjusting the LCD Display This function prevents after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. Bar MENU → → → → ENTER → → → → → → → → → ENTER → → → → → ENTER → This function prevents after-images on the screen by moving long black and white vertical lines.
Adjusting the LCD Display → , → ENTER When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz, by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note Available in PC mode only 1. Off 2. 1024 X 768 3. 1280 X 768 4. 1360 x 768 5.
Adjusting the LCD Display Side Gray MENU → → → → ENTER → → → , → → → → → → → → → → → ENTER → ENTER Select the brightness of the grey for the screen background. 1. Off 2. Light 3. Dark Reset Reverts the product settings to factory defaults. The Reset function is only available when PC / DVI is being used.
Adjusting the LCD Display Lamp Control MENU → → → → ENTER → → ENTER → → , → → → → → → → → → → → → → ENTER Adjusts the inverter lamp in order to reduce energy consumption. Note This function does not operate when Dynamic Contrast is set to On in PC, DVI, AV, HDMI, TV modes. Multi Control Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed.
Adjusting the LCD Display Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. MagicInfo Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The TV menu is available when a TV tuner box is installed. • The MagicInfo menu is available when a network box is installed in the FX or FXn model.
Adjusting the LCD Display • To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help. It is highly recommended not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies. • For drive D:, EWF is not applied.
Adjusting the LCD Display 4. Connect your keyboard and mouse and press the “ALT + F12” keys on your keyboard. 5. The Windows Desktop is displayed and the Magicinfo pro icon (the image will be inserted) appears. Move the cursor over the icon. Note If the Magicinfo icon is not displayed on the notification area, double click the Magicinfo icon on the window desktop. The icon will appear. 6.
Adjusting the LCD Display 7. The Player screen of Magicinfo pro is displayed. Note To finish the MagicInfo, press ALT + F12. Photo The JPEG, BMP file format are supported. 73 Downloaded From TV-Manual.
Adjusting the LCD Display Auto Automatically fits the image to the window. Original Shows the properties of the original file. Slide Show Displays the properties of the original file as they are. 74 Downloaded From TV-Manual.
Adjusting the LCD Display Interval Controls the time intervals between image files for a slide show. (5 Sec, 10 Sec, 20 Sec, 30 Sec, 60 Sec) Rotation Displays an image file by turning it clockwise by 90 degrees. 75 Downloaded From TV-Manual.
Adjusting the LCD Display Zoom Displays a reduced picture. Close Closes the image control Menu. 76 Downloaded From TV-Manual.
Adjusting the LCD Display Music The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. Play Plays a movie file. 77 Downloaded From TV-Manual.
Adjusting the LCD Display Full Size Plays a movie file in full screen. OFFICE / HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note • Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF doucuments. 78 Downloaded From TV-Manual.
Adjusting the LCD Display Internet Connects to the Internet Setup Sets various functions in MagicInfo mode. A password must be entered to access Setup mode. Schedule View Displays a schedule. 79 Downloaded From TV-Manual.
Adjusting the LCD Display TCP/IP Changes the TCP/IP settings. Connection Modifies the network settings. 80 Downloaded From TV-Manual.
Adjusting the LCD Display Password The password can be changed. • The password should be between 6 and 12 characters in numeric format. (You should enter a password between 6 and 12 characters in numeric format) • If you enter the wrong password three times, the setup configuration is reset and a warning message appears from the server. • If you forget the password, enter Info, 8, 2 and 4 on the remote control to initialize the password. This will reset the previous settings of Setup mode.
Adjusting the LCD Display Play Option You can set the repeat play and screen settings. Repeat : Determines the repeat option for playing movies and music. • None - Select No Repeat to play a movie or tune in the list only once. • File Repeat - Select Repeat File to play a movie or tune in the list repeatedly. • List Repeat - Select Repeat List to play movies or tunes in the list in sequence repeatedly. Rotation - Sets the picture orientation.
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display.
Troubleshooting • Do not use benzene, thinner or other flammable substances, or a wet cloth. • We recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) • The user will be required to pay costs and related expenses for repairing damages caused.
Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and the LCD Display is on. (Refer to the Connecting a Computer) Q: "Check Signal Cable" message.
Troubleshooting A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The Power Indicator blinks. A: The LCD Display is currently saving the changes made in the settings to the OSD memory. Q: The screen is blank and the power indicator light blinks every 0.5 or 1 seconds.
Troubleshooting A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Problems related to MagicInfo Note Making a Bootable USB Flash Disk. Q: Making a Bootable USB Flash Disk A: 1) You can turn a common 512-MB or bigger USB storage media into a bootable disk using a USB bootable disk creation tool.
Troubleshooting Set the resolution at the Control Panel → Display → Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: How can I clean the outer case/LCD Panel? A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the LCD Display.
Specifications General General Model Name SyncMaster 400FX(n) LCD Panel Size 40 " Diagonal (101 cm) Display area 885.17 mm (H) X 497.7 mm (V) Pixel Pitch 0.461 mm (H) X 0.461 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0.
Specifications Dimensions (W x H x D) / Weight 971.0 x 643 x 311.0 mm / 38.2 x 25.3 x 12.2 inch (With Stand) / 20.4 kg / 45.0 lbs (With protection glass-option) 23.9 kg / 52.
Specifications Item Specification Music Remarks Supported File Format : MP3 Sound bandwidth : 50 Hz to 15 kHz Movie - MPEG1, WMV - Max 1280 x 720 30 fps File MS Office(Word, Excel, - Some files may not be supporPower Point), HTML, PDF ted depending on the format or the version. - Install the proper viewing (freeware) program to see MS Office (Word, Excel, Power Point) or PDF documents.
Specifications PowerSaver (When used as a normal monitor) State Power Indicator Power Con- 400FX sumption Normal Oper- Power saving ation mode On 180 W Blinking Power off (Power-button) Power off (Power-switch) On Off Less than 2 W Less than 2 W 0W Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on.
Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate.
Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-LCD. • Resolution: 1920 x 1080 • Vertical frequency (refresh rate): 60 Hz TFT-LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one millionth) and above is used for this product.
Information Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. Change the Color Information periodically Note Use Two different colors Rotate the Color Information with 2 different colors every 30 minutes.
Information • Avoid using a combination of characters and background color with large difference in luminance. Avoid using Grey colors, which can cause Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Change the characters color periodically • Use Bright colors with little difference in luminance. - Cycle : Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement.
Information Note ( Please check CD's User Guide at "OSD Function", some model's will not available ) Apply the Screen Pixel function on Product • Apply the Screen Pixel function - Symptom: Dot with Black Color move up and down.
Information - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) Note ( Please check CD's User Guide at "OSD Function", some model's will not available ) 98 Downloaded From TV-Manual.
Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com/mx Latin America ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421 http://www.samsung.
Appendix Europe GERMANY 01805 - SAMSUNG (726-7864) http://www.samsung.de (€ 0,14/Min) HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.com/lu NETHERLANDS 0900 SAMSUNG (726-7864 € http://www.samsung.com/nl 0,10/Min) NORWAY 3 - SAMSUNG(7267864) POLAND 0 - 801 - 1SAMSUNG(172678) http://www.samsung.com/pl http://www.samsung.
Appendix Asia Pacific NEW ZEALAND 0800 SAMSUNG (0800 726 http://www.samsung.com/nz 786) PHILIPPINES 1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com/sg THAILAND 1800-29-3232, 02-689-3232 http://www.samsung.com/th TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 http://www.samsung.com/vn Middle East & Africa SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com/za TURKEY 444 77 11 http://www.samsung.
Appendix Example: If the resolution is 1920 x 1080, this means the screen is composed of 1920 horizontal dots (horizontal resolution) and 1080 vertical lines (vertical resolution). SRS TS XT This feature outputs sonorous and vivid 3D sound as for 5.1 channel speaker sound but through a 2-channel speaker. It has a good effect when stereo signals are input.
Appendix 103 Downloaded From TV-Manual.
