452/453/457 LCD TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model LC452_453_457-hotel.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses.
Contents Accessories............................................................................................................................................................... 4 Install the Stand......................................................................................................................................................... 4 How to Adjust the Stand (19inch model only).............................................................................................................
Accessories ✎✎Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. ✎✎The items’ colour and shapes may vary depending on the models. yy Remote Control & Batteries (AAA x 2) yy Cleaning Cloth yy Owner’s Instructions yy Power Cord / Data Cable yy Warranty Card / Safety Guide / Registration Cards (Not available in all locations) Blanking Bracket ✎✎The stand and stand screw may not be included depending on the model.
How to Adjust the Stand (19inch model only) 1. Place the front of the TV onto a soft cloth or cushion on a table as in Figure 1. ✎✎ Align the TV bottom along the table edge. 1 2. Press on the center of the TV back. Adjust the stand as in Figure 2 while ✎✎ pressing the button on the back of the stand. 3. Place the TV on the table so that the TV sits safely on the table. 2 How to Adjust the Angle of the TV (19inch model only) ✎✎When you adjust the stand, press the button on the back of the stand. 1.
Installing VESA Compliant Mounting Devices (19inch model only) Button 1. Place the TV face down on a soft cloth or cushion on a table. 2. Adjust the stand, pressing the button on the back of the stand. 1 Mounting pad (Sold separately) 3. Align the mounting interface pad (not supplied) with the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases (not supplied). 2 Using the Decoration Covers (19inch model only) 1.
Installing the LCD TV Stand (19inch model only) If any items are missing, contact your dealer. ✎✎When installing the stand, use the provided components and parts. ⓐ Screws: 3EA ⓑ Screws: 4EA Stand Cover Neck 1 Guide Stand Screws 2 Back Front 3 4 Position 2 Front Back Position 1 1. Insert the Cover Neck into the groove of the stand. Assemble the LCD TV stand by aligning the triangle figures indicated by the arrow marks. 2.
Viewing the Connection Panel LE32C452C4HXXC LE32C453C4HXXC LA32C457C6HXZN LA37C457C6HXZN LA40C457C6HXZN 1 2 3 4 6 7 HDMI IN3 ANT IN 4 8 9 Power Input % LE32C457C6HXXC LE37C457C6HXXC LE40C457C6HXXC $ @ # 1 2 3 4 ! 5 6 0 7 HDMI IN3 5Vdc/2.5A (12Vdc/1.5A) ANT IN 4 8 9 Power Input % LE26C452C4HXXC LE26C453C4HXXC LA26C457C6HXZN $ @ # 1 2 3 4 ! 6 0 7 HDMI IN3 ANT IN 4 8 9 Power Input % 8 $ # @ ! 0 English LC452_453_457-hotel.
LE26C457C6HXXC 2 3 1 4 5 7 6 HDMI IN3 5Vdc/2.5A (12Vdc/1.5A) ANT IN 4 8 9 Power Input % LE19C452C4HXXC LE19C453C4HXXC LE22C452C4HXXC LE22C453C4HXXC LE22C457C6HXXC $ $ @ # 8 4 ! 6 0 7 AV IN 9 3 Power Input # @ 0 ✎✎Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎✎When connecting an external device, match the color of the connection terminal to the cable.
7 PC IN: Connect to the video output jack on your PC. Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. ✎✎Optimal resolution is 1360 X 768 @ 60 Hz. (Only for 19" 22" 26" 32" models) Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.
✎✎When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN 1 jack. ✎✎The interlace mode is not supported. ✎✎The set might operate abnormally if a non-standard video format is selected. ✎✎Separate and Composite modes are supported. SOG is not supported. 8 USB (HDD) / CLONING –– Connector for software upgrades and Media Play, etc. –– Service connection. 9 AV IN 1, 2 –– Connect a VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Viewing the Control Panel ✎✎The product colour and shape may vary depending on the model. Remote control sensor Power Indicator Speakers SOURCEE MENU y z P (Power) Remote control sensor Power Indicator Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. Displays an on-screen menu, the OSD (on screen display), of your TV’s features. Adjusts the volume.
Viewing the Remote Control ✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons. POWER SOURCE Turns the TV on and off. Display and select the available video sources. Selects the HDMI mode directly. HDMI Have direct access to channels. Alternately selects Teletext, Double or Mix. PRE-CH TTX/MIX Return to the previous channel. Cut off the sound temporarily. Adjust the volume. Change channels.
Connecting the TV with SBB LE32C452C4HXXC LE32C453C4HXXC LA32C457C6HXZN LA37C457C6HXZN LA40C457C6HXZN TV Rear Panel Hotel Server STB(Set Top Box) or SBB(Set Back Box) ANT 2 IN (CABLE) ANT 1 IN (AIR) ETH MODEM Data Cable LE32C457C6HXXC LE37C457C6HXXC LE40C457C6HXXC TV Rear Panel ANT IN DC-POWER 5Vdc/2.5A (12Vdc/1.
LE26C457C6HXXC TV Rear Panel ANT IN DC-POWER 5Vdc/2.5A (12Vdc/1.5A) DC Cable ETH MODEM Data Cable Hotel Server STB(Set Top Box) or SBB(Set Back Box) LE19C452C4HXXC LE19C453C4HXXC LE22C452C4HXXC LE22C453C4HXXC LE22C457C6HXXC AV IN Hotel Server STB(Set Top Box) or SBB(Set Back Box) ETH MODEM Data Cable 1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB(SBB) with the Data cable. ✎✎ Use data communication. 2. Connect the [Class 2 Wiring-5V DC/2.5A (12V DC/1.
Warning When you use the DC power output jack, you have to check the standard output power of STB(SBB) and you should use the DC power within the standard output(Class 2 Wiring-5V DC/2.5A (12V DC/1.5A). –– For 5V SBB, SBB load current must not exceed 2.5A. –– For 12V SBB, SBB load current must not exceed 1.5A. –– The initial output is 5V. –– For 12V SBB, you have to change the output voltage to 12V in order to use the power. Changing the Output Voltage (Only for EU C457 26" 32" 37" 40" model) 1.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following method. ¦¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel ANT IN 5Vdc/2.5A (12Vdc/1.5A) Speaker 1 Volume Control Box VOL+ 2 VOL- 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Signal wire : Speaker + Shield wire : Speaker - 2.
yy Variable Output Port Specifications –– Speaker Wire: Use speaker cable no more than 82 feet (25m) in length. Volume Control Box VOL + 1 3 2 VOL - VOL - UP GND VOL - DOWN ( White 1 ) ( Black /Red 2 ) ( Shield Wire 3 ) ¦¦ Connect through the Fixed Output (available without an external amplifier) Audio Amplifier TV Rear Panel AUDIO IN 1 Stereo cable 1. Connect the AUDIO OUT port of the TV and the Audio In port of the audio amplifier with a stereo cable. 18 English LC452_453_457-hotel.
Connecting the MediaHub HD Output of any external source connected to MediaHub HD on hotel desk. TV Rear Panel MediaHub HD Rear HDMI ANT IN USB RS/232 5Vdc/2.5A (12Vdc/1.5A) 2 HDMI cable 1 RS-232 Data Cable 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI port of the TV and the HDMI port of the MediaHub HD.
Connecting the RJP (Remote Jack Pack) Output of any external source connected to RJP on hotel desk. 5 4 HDMI cable HDMI S-VIDEO RCA AUDIO/PC RS/232 ANT IN 5Vdc/2.5A (12Vdc/1.5A) HDMI IN3 USB TV Side Panel TV Rear Panel RJP Rear 1 D-sub / PC Audio cable or 2 Video / Audio Cable 3 Audio Cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the S-VIDEO port of the RJP. 3.
yy The following table shows the approximate time in seconds to switch from the TV to the input source, based on the priority. ✎✎ Scenario 1: When no inputs are connected. Source To Connect AV PC HDMI 2 Sec 0.7 Sec 3.9 Sec ✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected. Source Disconnect To Connect Total AV PC HDMI 4.5 Sec 0.7 Sec 3.9 Sec 2 Sec 0.7 Sec 3.9 Sec 6.5 Sec 1.4 Sec 7.8 Sec ✎✎ E.g.
Setting the Hotel Option Data ¦¦ Standalone Mode To Enter: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order. To Exit from this menu : power off and turn on again.
No Item initial Value Description 23 Local time Manual Selection of the way to update clock data - Manual: Use clock data from DVB channel or manual clock setting when the TV is in the stand-alone mode - TTX: manual clock setting (with updating from TTX data) 24 Time Format 12 Hour Select time expression method(12H/24H) Reset AC power after setting this option 25 PMOLED Test Failure 26 PMOLED Normal Dim. 3 PMOLED brightness selection 27 PMOLED StandBy Dim.
¦¦ Interactive Mode To Enter: Press the INFO → MENU → 0 → 1 → EXIT buttons in order, in normal operation state. To Exit from this menu : Power Off and Turn On again. (Press POWER button with general SAMSUNG remocon) No 1 2 3 Item Hotel Mode SI Vendor Power On Channel initial Value On Samsung 1 4 Channel Type ATV 5 6 7 Power On Volume Min Volume Max Volume 10 0 100 8 Panel Button Lock Unlock 9 Power On Source TV Select the Input source when TV is turned on initially.
No Item initial Value 24 Time Format 12hour 25 PMOLED Test Failure 26 PMOLED Normal Dim. 3 PMOLED brightness selection 27 PMOLED StandBy Dim. 2 PMOLED STY-BY brightness selection 28 Audio Loop In OFF Audio loop identification or H.P identification selection 29 Menu Display OFF - On : Main Menu display - Off : Main Menu No display 30 Customer Logo OFF Select Hotel Logo 31 Logo Download ... Download Hotel Logo from USB to TV ...
¦¦ Welcome Message Welcome message is a feature to display custom message on TV, every time TV is turned on by Guest in Hotel room. –– Welcome message settings are placed in Hotel Option Menu. –– Welcome message should be ON in order to display the message on power on. Hotel Mode SI Vendor ON RJP Priority AV 1 Logo Download Samsung RJP Priority PC 2 Logo Display Time ... RJP Priority HDMI 3 Power On Option Last Option Power On Channel 1 Channel Type RJP AV Option ATV AV1 ...
¦¦ Hotel Logo Hotel Logo is a function that shows picture image which represents hotel during power on procedure. –– Hotel Logo will be in hotel option menu in both Standalone and Interactive mode. –– Lower menus will be enabled when hotel Logo option is on. –– Hotel Logo will be displayed if there is logo image which is already stored in memory and hotel logo option is on during power on procedure. –– Hotel Logo will not be displayed when Hotel Logo option is off, even if the logo image exists.
¦¦ USB Cloning HDMI IN3 USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload the same to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. yy Cloning from TV to USB: It is an operation to copy the stored data from the specific area on the EEPROM from the TV set to the USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
¦¦ Hotel Plug & Play Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup once. –– Hotel Plug & Play is available only one time when power is first turned ON. –– After setting up first TV and Clone TV to USB –– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
yy Hotel Plug & Play OSD –– Initial Highlight: Interactive –– If Standalone Only button is selected, the Standalone hotel mode is set by default and “Standalone mode is set” OSD is displayed for 3 seconds. –– TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds. –– When Interactive mode is selected, Interactive Setup Menu is displayed. Press power off button to exit from Interactive menu.
¦¦ Multi Code Remocon Multi Code Remocon is a special transmitter which is designed to control each TVs with one remote. This function is useful where there is more than one TV in one location like hospital Set ID number will be displayed in source osd. It is possible to support up to 10 different remote key transmission for multi code. Initial ID code which each TV has is “0”. –– ID code could be set and reset in Analog TV mode or PC mode.
¦¦ Mixed Channel Map Mixed Channel Map is a function to mix Air and Cable channels. [ If there are no Cable channels, you can use this item as channel sorting. ] –– Mixed channel Map, Channel Editor and Channel Auto Store are newly placed in Hotel Option Menu. –– Mixed channel Map should be ON in order to mix Air and Cable channels. –– Use Channel Editor to sort the channels as user-desired channel numbers. Hotel Mode ON RJP Priority AV 1 Logo Download ...
1. Rearrange Air and Cable Channels based on User-desired Channel List in ‘Channel Editor’ a. Check the largest channel number from the user-desired channel list. Chnnel No. A A A A Programme Name 1 2 3 4 5 6 7 8 9 BBC1 BBC2 FR1 BOXER FR2 TF1 Disney M6 Canal+ ← Programme 'Canal+' has the largest channel number b. Locate cursor to a programme that you want to put it into the largest channel number. c. Press TOOLS key. d. Move cursor to Edit Channel Number and press ENTERE key.
f. Check the second largest channel number from the user-desired channel list. Chnnel No. Programme Name 1 2 3 4 5 6 7 8 9 A A A A BBC1 BBC2 FR1 BOXER FR2 TF1 Disney M6 Canal+ ← Programme 'M6' has the second largest channel number g. Locate cursor to the other programme that you want to put it into the second largest channel number. h. Press TOOLS key. i. Move cursor to Edit Channel Number and press ENTERE key.
Installing the Wall Mount Assembling the Blanking Bracket When installing the TV onto a wall, attach the Blanking Bracket as shown. Blanking Bracket Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.
Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. ¦¦ To Avoid the TV from Falling 1. Put the screws into the clamps and firmly fasten them onto the wall.
Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. 1 2 ✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the “K” icon. 1.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Centre AUSTRIA 800-112233 FINLAND 0771-400002 FRANCE 0825-022062 GERMANY 01805-471101 HUNGARY 0640-985985 ITALIA 800-194194 NETHERLANDS 015-2197000 POLAND 0-801-B2BSAM (222726) PORTUGAL 808-B2BSAM SPAIN 0902024-010 UNITED KINGDOM +44 (0) 845 8414141 SOUTH AFRICA 0860-SAMSUNG (726-7864) U.A.