LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. If the LodgeNet system is already installed at your location, you do not need to install the LodgeNet Set-Top Box.
Contents yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy Introduction............................................................................................................................................................... 2 Operational Modes.................................................................................................................................................... 2 Still image warning.................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ color and shape may vary, depending on the model. ✎✎The parts for the stand are listed under Stand Components on the following page.
Installing the LED TV Stand The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right. See page 6. Components When installing the stand, use the provided components and parts.
Assembling the swivel stand (32 inch TVs or larger) The 32” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90 degrees left and right using the BRACKET HOLDER SWIVEL. ¦¦ 20° swivel To configure the TV so that it swivels 20° left and right, insert the prong on the bottom of the stand through the curved hole in the Bracket Holder Swivel marked 20°.
¦¦ Hotel Mount Kit Bolt + Nut Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA) Top Bottom Affix the stand to a flat surface such as a dresser top, desk top, or entertainment center as shown. WARNING: To prevent injury, you must attach this TV securely to the floor, a table, a dresser top, etc. with the Hotel Mount Kit as described in these instructions.
Using the TV's Controller The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control. Selecting the Media Play Selecting the Menu Selecting a Source Function menu Return Remote control sensor TV Controller The image is drawn as if you are facing the front side of the TV. Power off ✎✎The product color and shape may vary depending on the model. ✎✎To exit the menu, press the Controller for more than 1 second.
The Connection Panel 1 HDMI IN 2 (DVI) 1 HDMI IN 1 2 USB (5V 0.5A) / CLONING 9 HOSPITALITY TV HDMI IN 3 (ARC) 1 GAME CONTROL DATA DVI AUDIO IN AV IN VIDEO EX-LINK DIGITAL AUDIO OUT (OPTICAL) 3 AUDIO AUDIO OUT 4 5 ANT IN AIR/CABLE 6 7 8 ✎✎Whenever you connect an external device to your TV, make sure that the TV and the device are turned off. ✎✎When connecting an external device, match the color of the connection terminal to the cable.
Using the TV's Controller POWER Display and select the available video sources. Turns the TV on and off. Press to access channels directly. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press '-' and ‘3’. Return to the previous channel. Cut off the sound temporarily. Change channels. Adjust the volume. HOME: Display the REACH menu if REACH has been downloaded to the TV. Display the channel list on the screen.
Connecting the TV to the Lodgenet game controller or a STB of a SI vendor TV Rear Panel ETH MODEM Data Cable GAME CONTROL DATA or Game Controller TV Rear Panel GAME CONTROL DATA Data Cable 1. Connect the LodgeNet game controller to the TV’s GAME CONTROLLER/DATA jack. 2. Connect the GAME CONTROLLER/DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type.
¦¦ List of SI Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. yy Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Code Label Note the labeled end. Note the labeled end.
¦¦ Connecting the Audio Output to an Audio Amplifier AUDIO IN TV Rear Panel Audio Amplifier EX-LINK AUDIO OUT 1 Stereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable.
Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. 3H DMI cable TV Rear Panel USB HDMI S-VIDEO RCA AUDIO/PC RS/232 RJP Rear HDMI IN 2 (DVI) HDMI IN 1 HDMI IN 3 (ARC) 1P C Audio cable DVI AUDIO IN USB (5V 0.5A) / CLONING AV IN VIDEO 2V ideo / Audio Cable AUDIO 4 1. 2. 3. 4. Connect the DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
yy RJP (Remote Jack Pack): The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/Inactive sources. –– A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 18). 1 is the highest priority and 3 is the lowest.
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the menus are listed below. Menu items in the Stand-alone mode only: –– SI Vendor : Smoovie –– REACH Server and its submenus. Menu items in the Interactive mode only: –– SI Vendor: Samsung and other vendors. All other items appear in both menus.
¦¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Menu Item initial Value Hospitality Mode Hospitality Mode Interactive SI Vendor SI Vendor EBL Power On Channel EN Last Saved Power On Channel Channel Type Power On Volume EN Power On Power On Volume Min Volume Max Volume 3 ... Last Saved ...
Menu Item initial Value Operation Panel Button Lock Unlock Clock Local Time Manual Music Mode AV OFF Music Mode Backlight OFF 7610 Priority AV 1 7610 Priority PC 2 Music Mode External Device External Source 18 English 7610 Priority HDMI 7610 AV Option RJP HDMI Option HDMI Music Mode 3 AV HDMI1 Description Turning the front panel (local key) operations on/off. yy Unlock : Unlocks all panel keys. yy Lock : Locks all panel keys.
Menu Item Eco Solution Energy Saving Logo/ Message Welcome Message Edit Welcome Message Hospitality Logo Hospitality Logo DL Cloning Logo Display Time Clone TV to USB Clone USB to TV Setting Auto Initialize REACH Server update Time REACH Server REACH Update Immediate REACH Server Channel REACH Server Version REACH Server Group ID S-LYNK REACH S-LYNK REACH Volume IPG Room Type TICKER initial Value Description OFF Adjusts the brightness of the TV to reduce power consumption.
Menu Item CAS initial Value Pro:idiom Self Diagnosis PI AES Data 0xD279 Self Diagnosis for TV Service Self Diagnosis for HTV Upgrade Now Service Pattern ATV Cable AGC Gain DTV Cable AGC Gain TV reset 32GRAY Default Default Description Configures CAS support. Applies to only the NB673, NB677, and NB678 models. OFF : Turns off CAS support. LYNK DRM : Select to turn on S-LYNK DRM CAS support only. Pro:idiom : Select to turn on Pro:Idim CAS support only.
¦¦ Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on. –– Welcome message settings are in the Hotel Option Menu. –– Set Welcome Message to ON to display the message when the TV is powered on. Welcome Message OFF Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... –– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
¦¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is initially powered on. –– Hospitality Logo settings are in the Hotel mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard array of settings and distribute that standard array to all the TVs in your facility. yy Cloning from TV to USB: Copies stored menu settings from a TV to a USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
yy Settings Cloned in the Hotel Menu Menu Item Cloning Support Applicable Region Hospitality Mode Yes All SI Vendor Yes All except Brazil Power On Channel EN Yes All Power On Channel Yes All Channel Type Yes All Power On Volume EN Yes All Power On Volume Yes All Min Volume Yes All Max Volume Yes All Power On Source Yes All Power On Option Yes All Channel Setup N/A All except Hospital Channel Editor N/A All Channel Bank Editor N/A Smooovie SI and Hospital Channel
RJP HDMI Option Yes All HDMI Music Mode Yes US and US Hsopital Sound Bar Out Yes All Video Out Yes ASIA Models only USB Media Mode Yes US and EU External Source Banner Yes All Auto Source Yes All Anynet+ Return Source Yes All Models except Hospital Sub Amp Mode Yes All except US Sub Amp Volume Yes All except US Pillow Speaker Type Yes Hospital Models Only Speaker Select Yes Hospital Models Only Pillow Volume Yes Hospital Models Only Energy Saving Yes All Energy Savi
¦¦ Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD. The Initial ID code for each TV is “0”. –– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.) –– You can set the ID code to any digit from 0 to 9.
¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example - the Picture menu - they can change the settings in those menus so they are no longer standard.
¦¦ USB Software Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings.
¦¦ Channel Bank Editor (Smoovie TV Only) The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to. The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank. SMOOVIE remotes have instalable Bank Cards which correspond to the channel banks in the Channel Bank Editor. The remotes only allow access to channels in the channel bank that correspond to the installed card.
Smoovie Set Up Sequence Smoovie TV Setup (Air/ Cable ) Only Air or Cable used Only Air or Cable used If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done 1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu 2 After P&P, the TV displays the Hotel menu Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable Select Smoovie TV in the Hotel menu 4 Select Smoovie TV in the
The picture below shows a sample Channel Editor screen. Channel All a Delete b Select All a2 ----- (Cable) a 10 a3 ----- (Cable) Air 10-1 CW DTV a4 ----- (Cable) a 11 CW HBO a5 ----- (Cable) Air 11-1 HBO DTV a6 ----- (Cable) a 12 NBC a7 ABC Air 12-1 NBC DTV Air 7-1 ABC a 13 ----- (Cable) CNN a8 FOX a 14 Air 8-1 FOX DTV Air 15 ----- (Cable) a9 ----- (Cable) a 16 TNT } Video Mute On ` Information U Page E Select T Tools R Return yy a Indicates an analog channel.
When you press the TOOLS button, the following menu is available.
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below. In the example, there are two external sources connected to the TV, HDMI2 (DVI) and AV. –– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select the channel number of the analog channel.
Installing the Wall Mount Wall or Ceiling Mounting If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Preparing before installing Wall-Mount (46" only) To install a wall-mount from another manufacturer, use the Holder-Ring. ✎✎The product shape may differ depending on the model.
Securing the TV to the Wall Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. To Avoid the TV from Falling 1.
Anti-theft Kensington Lock The Kensington Lock is a device you can use to physically fix a TV to a location when you use it in a public place. The appearance and locking method may differ from the illustration at right, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. 1 The Kensington Lock is not supplied by Samsung. ✎✎Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K” icon.
Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name 50°F to 104°F(10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F(-20°C to 45°C) 5% to 95%, non-condensing HG40NB678 Display Resolution Sound (Output) Screen Size (Diagonal) Dimensions (WxHxD) Body With stand Weight Without Stand With Stand Stand Swivel (Left / Right) HG46NB678 1920 x 1080 10W x 2 40" Class (40.0" measured diagonally) 46" Class (45.
Dimensions HG40NB678 ▪▪ Front view / Side view 7 1 2 4 3 5 6 (Unit: inches) 1 2 3 4 5 6 7 36.5 35.0 19.8 21.7 24.0 8.9 1.9 ▪▪ Jack panel detail / Rear view 1 5 2 6 4 3 (Unit: inches) 38 1 2 3 4 5 6 9.8 6.9 6.2 24.4 7.8 7.
HG46NB678 ▪▪ Front view / Side view 1 7 1 5 2 2 6 4 3 5 4 3 6 (Unit: inches) 1 2 3 4 5 6 7 41.7 40.2 22.6 24.6 26.9 8.9 1.9 ▪▪ Jack panel detail / Rear view 5 1 6 2 4 3 (Unit: inches) 1 2 3 4 5 6 12.1 6.4 6.9 30.1 15.7 15.
▪▪ Base Stand detail HG40NB678/HG46NB678 (Unit: inches) 21.6 9.2 7.1 (Unit: inches) 20.3 8.9 2.6 5.3 R9.5 R3.75 5.9 20.3 8.9 40 English 7.
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
¦¦ License Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Hospitality Hotline: 866-894-0524 Web site: http://www.samsung.
This page is intentionally left blank.