Oki Facsimile User Guide

162
Handbook
|
5 MF(TONE)/DP (PULSE)
This function sets the dialing method. Use the MF setting
for Touch-Tone dialing, or the DP setting for pulse dialing.
Default: MF (TONE).
6 PBX LINE
Turn this function on if your fax machine is connected to a
PBX (Private Branch Exchange—a phone system used to
route internal calls). Once this function has been turned on
and the access digit function has been programmed using
the Dial Prefix parameter (below), your fax machine
recognizes the access digit you use in your PBX to get an
outside line. Refer to Dial Parameter 8, Dial Prefix
function for more information.
Refer to the “Setting Basic Features, Connecting to a
PBX” section of this handbook for instructions on
changing this setting.
Available settings are ON and OFF.
Default: OFF.
7 AUTO START
When this function is turned on, your fax machine
automatically dials as soon as you press a One Touch key
or enter an Auto Dial code—you do not have to press
Start.
Available settings are ON and OFF.
Default: ON.
8 DIAL PREFIX
If your fax machine is connected to a PBX, use this
function to specify the access digit used to obtain an
outside line from your PBX. You can enter a number with
up to four digits. When this parameter is programmed, the
fax machine recognizes the access digit when you enter a
number and automatically pauses for an outside line
before dialing the rest of the number.
Refer to the “Setting Basic Features, Connecting to a
PBX” section of this handbook for instructions on
changing this setting.
Available settings are ON and OFF.
Default: OFF.