Oki Facsimile User Guide

|
Handbook 65
To dial using an external telephone
Pick up the handset of your external telephone and dial
the number of the machine you wish to transmit to. If the
receiving fax machine is in automatic reception mode,
you will hear a high-pitched tone. If a person answers the
phone, ask them to press the Start key on their machine.
3 If necessary, press the Start key to begin the transmission.
Below are explanations for some of the messages you may
see during a typical fax transmission.
!
By default, One Touch keys and Auto Dial numbers
begin transmission automatically, without pressing the
Start key. The Auto Start setting lets you change this.
Refer to the “Dial Parameters Settings” section of this
handbook.
(location)
The remote location’s Personal ID, TSI/CSI, Location ID or
the telephone number you entered identifies the location
during transmission.
DIALING
Your fax machine is dialing the number.
CALLING
The line is ringing.
SENDING/XX.X
Your fax machine is sending the message. XX.X indicates
the transmission speed in bits per second.
RESULT = OK
The fax was sent successfully.
COMMUN. ERROR
If the red alarm indicator lights and you see this or another
error message, a problem occurred during the
communication. Try resending the fax. Refer to the
“Problem Solving” section of this handbook for
assistance.