Oki Facsimile User Guide

Handbook 97

8 Press the Yes § key. The display shows

BROADCAST/MEMORY TX

9 Press the Yes § key.

The display shows

BROADCAST/MEMORY TX.

Press the Yes § key.

10Select a location. Refer to the instructions below.

• To select a One Touch key, press the One Touch key

(lift the main One Touch keypad to access One Touch

keys 16–30).

• To select an Auto Dial number, press the Auto Dial key,

then enter the two-digit Auto Dial number on the

numeric keypad.

• To select a number dialed on the numeric keypad, dial

as you would on a normal telephone.

• To select a group, use the numeric keypad and press the

# key. Then, enter the number of the group you want to

use.

11Press the Yes § key to confirm your selection. The display

shows

SELECT LOCATION(S).

12To continue selecting locations, repeat Steps 11 and 12 as

often as necessary.

key [when the SELECT LOCATION(S) message is

displayed].

14If you have selected multiple locations, the unit will ask

you if you want to confirm your selections with a printed

report before proceeding.

• If you do, press the Yes § key. After the report is

printed, the display shows BEGIN SCANNING?

and go back to Step 9.

• To remove a location, select the location in the same

transmission.