Specifications

5
English
FrançaisDeutschEspañolPortuguese Italiano
Connecting Your TFT-LCD Monitor
Figure 3. Cable connections
1
Turn off your computer and unplug its power cord.
2
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3
Connect the signal cable to the video port on your computer, video board, video card,
or graphics card.
4
Connect the RCA cable or S-VIDEO cable to DVD or VCR.
5
Connect the power cord of your monitor to the DC Adapter and connect the adapter
jack to the DC power port on the back of your monitor.
6
Plug the compter and monitor power cords into a nearby power mains outlet.
7
Turn your computer and monitor on. If your monitor displays an image, it has been
successfully installed.
8
If necessary, install the video driver for the monitor (see "Installing the Video Driver"
on page 7).
9
After your monitor has been fully installed successfully, run Auto Adjustment (see
page 11).
Setting up Your Monitor
570P body.fm Page 5 Monday, January 17, 2000 10:34 AM