User manual

11
ENGLISH
REFRIGERATOR INSTALLATION
11
REFRIGERATOR DOOR REMOVAL
If the refrigerator is too large to pass through your doorway
easily, you can remove the refrigerator doors.
1. After removing the three screws, and carefully lift up the
top table.
2. Disconnect the housing connector and sensor from the
top table and remove the top table. disconnect the heater
connector from the electric wire harness in the top of the
refrigerator left door.
3. Remove the screw that hold the ground wire. (Left and
Right)
4. With the 13/32-in. (10-mm) wrench, remove the three
bolts that hold the hinge on the top of the refrigerator.
(Left and Right)
5. Separate the hinge from the electric wire harness and the
ground wire. (Left and Right)
6. Remove the refrigerator door by lifting it upward. (Left and
Right)
WARNING
Be careful not to drop the refrigerator door during
removal. Scratches or door damage could occur.
Socket wrench
ground wire
DA68-01921B.indb 11 2010.3.10 2:1:15 PM