FOR TECHNICAL SUPPORT, PLEASE CALL 1-800-SAMSUNG (726-7864) POR FAVOR LLAMAR 1-800-SAMSUNG l726-7864) PARA ASISTENCIA TECNICA
Health and safety information Contents Health and safety information. ....................... 2 2 Camera layout 8 4 Setting up your camera .. .... 5 Unpacking Inserting the battery and memory card Charging the battery Turning on your camera Selecting options 5 7 6 6 7 7 15 12 38 8 21 Playing files .....................
I m -_. :::J Handle and dispose of batteries and chargers with care • Use only Samsung-approved batteries and chargers. Incompatible batteries and chargers can cause serious injuries or damage to your camera. • Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. Handle and store your camera carefully and sensibly • Do not allow your camera to get wet -liquids can cause serious damage.
Camera layout • • •Shutter button - .................................•.............. 8 :Power button 8 :AF sensor / Self-timer lamp ................................... .. - ........•.. - ............................................... - e :Microphone - .Speaker................................................................................................................ .... ,. . ·Flash CD Zoom Telem button / Digital zoom ... :................................... . - . . .. ..
Setting up your camera I_. m .;·i,~paCklng .•. .•. . ;:j ce (f) ::T Optional accessories AC adapter (AD44-00143A)/ USB cable (AD39-00165A) Camera 0 : ,. Camera case Memory cards AN cable (AD39-00146A) Battery charger (AD44-00164A) .
Setting up your camera Inserting_the battery.. and memory card .... Charging the battery Before using the camera for the first time, you must charge the battery. 4 3 ~ With the gold-colored contacts facing up Removing the battery 6 I ~ 2 With the Samsung logo facing up Removing the memroy card Push gently until the card disengages from the camera and then pull it out of the slot.
• Selecting options m ::J -_. c.e 1 Press [POWER]. • The intial setup screen appears. _ Language Tn ,:,,~:: ,'/id'", •• ","""""c",~,· ,;.;"~.."Ji" "" , Date & Time Time Zone ;2 Press [~] to select Language and press [~]. ~:) \,) Press [DISP] or [~] to select a language and press [OK]. 4 Press [DISP] or [~] to select Date & Time and press [0]. 5 '1 2 Press [DISP] or [~] to set the date and time or select a date format, and press [OK].
Capturing photos or videos Taking a photo 1 2 3 4 Recording a video In Shooting mode, press [MENU]. 1 In Shooting mode, press [MENU]. Select Program. 2 Select Movie. Align your subject in the frame. 3 4 Align your subject in the frame. Press [Shutter] halfway down to focus automatically. Press [Shutter]. • Press [OK] to pause or resume. • A green frame means the subject in focus. 5 ~ an- 0000 I [lID (IIiJ F3.5 1/901 Press [Shutter] again to stop the recording.
Playing files Viewing photos 1 2 Press I m Viewing videos [Ell. Press [~l or [0] to scroll through files. :::l -_. cc tJ) 1 2 Press 3 Use the following buttons to control playback. [Ell. ::r Press [OK]. • Press and hold to view files quickly. [§] 100-0001 @ m [~] Scan backward ........................ [OK] .................•....••.. - [0 ] -, ,",. "," ," ..........•..... , Pause or resume playback -.. - .
Transferring files to a PC (Windows) 1 Insert the installation CD in a CD-ROM drive and follow the onscreen instructions. 2 Connect the camera to the PC with the USB cable. Disconnecting safely (for Windows XP) ~~:!~!~'~~i!i::it; Click Safely remove USB Mass St rage Device· Drive(H:) ......... "_ ..,,. ... . ,., , , .,' .., . . ".."..,."., ...".. :;· . "~,,tli;,JR~,.l Click :'3 4 Turn on the camera. 5 Select the files you want and drag or save them to the PC.
Specifications :. Type: 1/2.33"CCD •• Effective pixels: approx. 12.2 mega-pixels •• Total pixels: approx. 12.3 mega-pixels ............................................................ Image sensor I_. m ::J . Display 2.7" (6.9 em) 230 K, TFT LCD Focusing :nL auto focus (Multi AF, Center AF, Face Detection AF) .............••..••.............•...............•..........................................................................................................................................
Please refer to the warranty that came with your product or visit our website http://www.samsung.com for aftersales service or inquiries. AD68-04873A (1.
SL605 Thank you for buying a Samsung Camera. This manual will help you learn to capture images, share or print your photos, and edit photos with the accompanying software. Please read this manual thoroughly.
Instructions Getting to know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. Setting up the applica- To use this camera with a PC, install the application software tion software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p.90) Take a picture Insert the USB cable Check the camera's power Take a picture. (p.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. å Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service center.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. å Leaking, overheating or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. å Remove the battery when not planning to use the camera for a long period of time.
Contents 026 027 027 028 029 030 030 030 030 032 032 034 034 036 038 038 038 039 039 040 040 041 041 042 044 044 004 How to use the Movie mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) How to use the Smart Night Mode Things to watch out for when taking pictures Using the camera buttons to set the camera POWER button SHUTTER button ZOOM button Info (DISP) / Up button Macro / Down button Focus lock Flash / Left button Self-timer / Right button MENU
Contents 055 055 056 056 057 057 058 PLAY Time Zone File name Imprinting the recording date Auto power off Auto Focus lamp Selecting Video out type Setting the USB 059 Starting play mode 061 062 LCD monitor Indicator Using the camera buttons to set the camera Thumbnail / Enlargement button 059 059 060 060 060 062 062 064 064 065 065 066 Playing back a still image Playing back a movie clip Movie clip capture function Playing back a recorded voice Playing back a voice memo Smart Album Info (DISP)
Contents SOFTWARE 089 089 For Windows users 093 Transferring files to your computer (for Mac) 095 FAQ 093 006 Transferring files to your computer (for Windows) For Mac users
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the equipment contact your nearest Samsung dealer or Samsung service center. Parts and accessories illustrated below may differ from exact appearance.
Identification of features Front & Top Shutter button POWER button Flash AF sensor / Self-timer lamp Microphone Speaker Lens / Lens cover 008
Identification of features Back Zoom Wide(W) button / Thumbnail Zoom Tele(T) button / Digital zoom LCD monitor Camera status lamp Strap eyelet MENU button 5 function button Play mode button Fn / Delete button USB / AV / DC terminal S.
Identification of features Bottom 5 Function button Information / Up button Memory card slot Flash / Left button Self-timer / Right button OK / Play & Pause button Battery chamber Battery chamber cover Tripod socket 010 Battery holder Macro / Down button
Identification of features Self-timer lamp Icon Mode icon Status Description - For the first 8 seconds, the lamp blinks at 1 second intervals. Blinking - For the final 2 seconds, the lamp blinks quickly at 0.25 seconds intervals. Blinking For the 2 seconds, the lamp blinks quickly at 0.25 seconds intervals. A picture will be taken after about 10 seconds and 2 Blinking seconds later a second picture will be taken.
Connecting to a Power Source You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera. Ê BP70A rechargeable battery Specification Model BP70A Type Lithium lon Capacity 740mAh Voltage 3.7V Charging time Approximately 150 Minutes Ê Number of images and battery life: Using the BP70A Battery life / Number of images Conditions Using the fully charged battery, Default settings, Program mode, Shot to shot interval: 30Sec. Approx.
Connecting to a Power Source Important information about USB cable usage. å Use a USB cable with the correct specification. å If the camera is connected to the PC through a USB hub : connect the camera directly to the PC. åIf the camera and other devices are connected to the PC at the same time : remove other device. åCamera can not be detected using the front side USB port of computer. In this case, use the back side USB port of computer.
Connecting to a Power Source When using the battery, please keep the following guidelines. Failure to do so may cause the generation of heat, fire or explosion å If you find the battery shape distorted in size, try to contact a service center. It may present physical dangers. å Use only the recommended battery charger. å Do not place the product close to the fire device. å Do not insert the product into the microwave oven. å Do not place the product inside a car during the summer.
Connecting to a power source Inserting the memory card Ê Insert the battery as shown Ê I nsert the memory card as shown. - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -) direction is right. - When the battery chamber cover is open do not force the battery chamber cover, this may damage it. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card å Be sure to format the memory card (see p.54) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. å Turn off the camera power whenever the memory card is being inserted or removed. å Repeated use of the memory card will eventually reduce the memory card’s performance.
Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards. Card pins When using a 1GB SD memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When using the camera for the first time Ê Charge the rechargeable battery fully before using the camera for the first time. Ê When the camera is turned on for the first time, a menu will be displayed on the LCD monitor to set date, time, time zone and language. This menu will not be displayed again after setting up the date, time, time zone and language. Set up the date, time, time zone and language before using this camera. 1.
LCD monitor indicator Ê The LCD monitor displays information about the shooting functions and selections. No. Description 5 Battery Icons p.15 6 Optical / Digital Zoom bar / Digital Zoom rate p.30 7 Photo Size / Movie Size p.39 9 Image Quality / Frame Rate Metering 10 Flash p.34 11 Self-timer / Drive mode p.37/ 48 8 p.40 p.45 12 Macro Face Detection · Self-Portrait 13 · Smile Shot · Blink Detection 14 Date / Time [Image & Full Status] p.42 2010/01/01 12:00 PM p.
How to use the menu 1. T urn on the camera and press the MENU button. A menu for each camera mode appears. Mode Smart Auto Program Shooting DIS Sound Photo Help... Display Scene Settings Exit Movie Change 2. Use the up or down button to navigate through the menus. Mode Smart Auto Program Shooting DIS Sound Photo Help... Display Settings Exit Press the Up or Down button.
Starting the recording mode Selecting modes How to use the Smart Auto mode( You can select the shooting modes by using the MENU button on the back of your camera. The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. 1. Insert the battery (p.15). Insert the battery taking note of the polarity (+ / -). Ê How to use the MENU button 1.
Starting the recording mode å If the camera does not recognize a proper scene mode, the default settings will be used. å Even if there is a face detected, the camera may not select a portrait mode depending on the subject’s position or lighting. å The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject. å The [Night] mode recognizes scenes only when the flash is set to off.
Starting the recording mode How to use the Program mode ( ) Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Select the Program mode by using the MENU button. (p.21) 2. Press the MENU button to configure advanced functions. How to use the DIS mode ( ) Digital Image Stabilization (DIS) mode.
Starting the recording mode Using the Photo Help Guide mode ( Available functions of the photo help guide ) å Functions that can be used when focusing is difficult å Functions that can be used when the image is blurred å Functions that can be used when filming in the dark å Functions that can be used when adjusting the picture brightness å Functions that can be used when adjusting the picture color Helps the user learn the correct picture taking method and includes solutions for potential problems
Starting the recording mode How to use the Scene modes ( The scene modes are listed below. ) Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the Scene mode by using the MENU button. (p.21) 2. Press the Right button, then press the Up/Down button to select the desired mode. 3. Point the camera towards the subject and compose the image by using the LCD monitor. 4. Press the shutter button to capture an image.
Starting the recording mode Ê How to use the [Frame Guide] mode How to use the Movie mode ( Set [Frame Guide] mode when you want someone else to take a picture for you from the angle you choose. A movie clip can be recorded for as long as the available recording time of the memory capacity allows. (Max.2 hours) 1. Take a picture from the angle you choose. - A guide appears around the sides of the picture. Frame Guide: Shutter 2.
Starting the recording mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) You can record the movie clip without sound. This camera allows you to temporarily stop during unwanted scenes while recording a movie clip. Using this function, you can record your favorite scenes into a movie clip without having to create multiple movie clips. Steps from 1-3 are the same as those for Movie mode. 4. Press the MENU button. 5.
Starting the recording mode How to use the Smart Night Mode ( ) This mode will help you take photos easily in the night scenes. 1. Press the S.NIGHT button. 2. Press the Flash button,then press the Left/Right button to select a desired flash mode. By using the Up / Down button, you can set the intensity of the flash. 3. Point the camera towards the subject and compose the image by using the LCD monitor. åB y pressing the S.NIGHT button, you can set on/off the Smart Night Mode at any mode.
Things to watch out for when taking pictures å Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] [Press the shutter button] å Compose the image by using the LCD monitor. å Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast.
Using the camera buttons to set the camera ZOOM button The recording mode function can be set up by using the camera buttons. If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 5X optical zoom and a 3X digital zoom function. Using both will offer a total zoom ratio of 15X. POWER button Used for turning the camera’s power on / off.
ZOOM button Ê WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Info (DISP) / Up button Macro ( While the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button will display the image information. While the menu is showing, the Down button operates as a direction button. When the menu is not showing, you can use the Macro ( ) / Down button to take macro pictures. The focus ranges are shown on the next page. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro ( ) / Down button Ê Types of focus mode and focus range (W : Wide, T : Tele) Mode Program ( Focus Type Macro ( Focus range W : 5 ~ 80 T : 100 ~ 150 Mode Focus Type Focus range (Unit: cm) Mode ) ) Ê Available focusing method, by recording mode ( o : Selectable, ä : Infinity focus range) Auto macro Normal Auto macro ( W : 5 ~ Infinity T : 100 ~ Infinity ) ) Normal W : 80 ~ Infinity T : 100 ~ Infinity Normal o o o W : 80 ~ Infinity T : 100 ~ Infinity DIS Mode ( Macro Mode o o o
Focus lock Flash ( To focus on a subject not positioned in the center of the picture, use the focus lock function. When the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the Left button operates as the Flash ( ) button. Ê Using the Focus Lock 1. Ensure the subject is in the center of the autofocus frame. 2. Press the shutter button halfway.
Flash ( ) / Left button å If you press the shutter button after selecting the flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. å Using the flash frequently will reduce the life of the battery. å Under normal operating conditions the recharging time for the flash is usually within 4 seconds. If the battery is weak, the charging time will be longer.
Flash ( Self-timer ( ) / Left button Ê Available flash mode, by recording mode ( o : Selectable) Mode o o o o o o o o o o o o o o SCENE Mode o o o o o o o o o o o o o o o o o o o o o o 036 å Smart Auto Flash ( ) icon will appear in [Smart Auto] mode. å Smart Night Flash( ) icon will appear in [Smart Night] mode. ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
Self-timer ( ) / Right button Ê Selecting the self-timer 1. Select a Recording mode with the exception of Voice recording mode.(p.21) 2. Press the Self-timer / Right ( ) button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second, Double self-timer or Motion timer icon appears on the LCD monitor. 3. When you press the shutter button, the picture will be taken after the specified time has elapsed.
MENU button Shooting ( - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : Movie and Still image mode. There is no menu available when the voice recording function is selected. DIS Sound Photo Help...
Shooting ( ) How to enable functions using the MENU button 1. Press the MENU button in an available mode. 2. Press the Up / Down button to select the [Shooting] menu and press the Right/OK button. Photo Size Photo Size Quality Shooting Quality EV EV Sound ISO ISO Display White Balance Mode Face Detection Settings Right/OK button Exit Face Detection Focus Area Exit Change Back 3. Select a desired menu by pressing the Up / Down button and then press the OK button.
Shooting ( ) Quality / Frame rate Exposure compensation You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the [EV] menu.
Shooting ( ) ISO White balance You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the colors to appear more natural. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness. Back ISO Adjust the sensitivity of the camera.
Shooting ( ) Face Detection Ê Using the Custom White Balance hite balance settings may vary slightly depending on the W shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the Custom ( ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white. 2. OK button : Selects previous custom white balance.
Shooting ( ) å This function can detect up to 10 persons. å When the camera recognizes many people at the same time, it will focus on the nearest person. å The Digital zoom is not activated in this mode. å When the camera detects a target face, the white color focus frame will be displayed over the target face and the grey color focus frame appears over the remaining faces. Press the shutter button halfway down to focus on the face and the white focus frame turns green.
Shooting ( ) Ê Smile Shot ※Selectable modes: Program, DIS, Photo Help Guide, Beauty shot, Portrait, Children, Beach & Snow The camera automatically takes a picture by detecting the face of the subject although you don’t press the Shutter button. If you press the Shutter button, the picture is taken in the normal way. When taking a picture of smile shot, showing teeth or keeping the smiley face of your subject helps detecting the smile face of the subject.
Shooting ( ) Auto Focus type Metering You can select your preferred Focus Area according to the shooting conditions. If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Center AF] ( [Multi AF] ( ) : The rectangular area in the center of the LCD monitor will be focused ) : This camera selects all of available AF point from the 9 AF points. [Multi] ( Set the autofocus method.
Shooting ( ) Photo Style Selector You can add various effects to the image without using image editing software. Photo Style Selector Set a photo style to evoke a mood. Back Move 1. S elect the desired Photo style selector by pressing the Left/Right button and press the OK button. Ê Custom RGB : You can change the R (Red), G (Green) and B (Blue) values of the image. Back Move Back Move - Up/Down button : Selects R, G, B - Left/Right button : C hanges the values 2.
Shooting ( ) Image Adjust Ê Saturation You can change the saturation of the image. Ê Contrast You can change the contrast of the image. 1. Select [Saturation] by pressing the Up/Down button. 2. Change the saturation by pressing the Left/Right button. 3. Press the Shutter button to take an image. 1. Select [Contrast] by pressing the Up/Down button. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image.
Shooting ( ) ACB Drive mode This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly. You can select continuous shot, and AEB (Auto Exposure Bracketing). - [ACB] Sub menus: [Off], [On] ACB Auto Contrast Balance automatically compensates for brightness differences.
Shooting ( ) Voice Memo Voice Recording You can add your voice-over to a stored still image. (Max. 10 sec.) A voice can be recorded for as long as the available recording time (Max. 10 hours) allows. Set the voice memo feature. Memo Back Move - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. Enable voice recording. Record Back Move Press the shutter button to record a voice.
Shooting ( ) Ê Pausing while recording a voice Recording the movie clip without voice sing this function, you can record your U favorite voice clips into a voice recording file without having to create multiple voice recording files. You can record the movie without voice. Stop Pause [Voice recording mode] 1. Press the OK button to pause recording. 2. Press the OK button again to resume the recording. 3. If you wish to stop recording, press the Shutter button again.
Sound ( # ) Shutter sound Ê The items indicated by * are default settings. ÄM enus are subject to change without prior notice. You can select the shutter sound.
Sound ( # ) Display ( AF sound Ê The items indicated by * are default settings. Ä Menus are subject to change without prior notice. If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status. - [AF sound] sub menus : [Off], [On]* Volume :Medium Start Sound :Off Shutter Sound :1 Beep Sound AF Sound ) Language There is a choice of language that can be displayed on the LCD monitor.
Display ( ) Start up image Quick View You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. I f you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. - Sub menus : [Off]*, [Logo], [User Image] - Use a saved image for the start-up image with the [Start Image] in the [Resize] menu in the play mode.
Settings ( ) Initialization Ê The items indicated by * are default settings. ÄM enus are subject to change without prior notice. All camera menu and function settings will be restored to their default values. However, values for Date & Time, Language and Video Out will not be changed. Formatting the memory This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images will be deleted.
Settings ( ) Setting up the Date / Time / Date type File name You can change the date and time that will be displayed on the captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor when travelling overseas. This function allows the user to select the file naming format. - Date type : [yyyy/mm/dd], [mm/dd/yyyy], [dd/mm/yyyy], [Off]* Format Reset Date & Time :10/01/01 yyyy mm dd Time Zone 2010 / 01 / 01 File No.
Settings ( ) Imprinting the recording date Auto power off There is an option to include Date&Time on still images. This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. - Sub menus [Off]* : The Date&Time will not be imprinted on the image file. [Date] : Only the Date will be imprinted on the image file. [Date & Time] : The Date&Time will be imprinted on the image file. Format Reset Date & Time Time Zone File No.
Settings ( ) Auto Focus lamp Selecting Video out type You can turn on and off the Auto Focus lamp. The Video output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On]* : The AF lamp will light up in low light conditions.
Settings ( ) - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. - PAL : A ustralia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway etc. - When using a TV as an external monitor, you will need to select the external or AV channel of the TV. - There will be digital noise on the external monitor, but it is not a malfunction.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( g ). The camera can now play back the images stored on the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Ê Manner mode To select the Manner mode, press the Play mode button for more than 5 seconds.
Starting play mode Movie clip capture function Playing back a recorded voice You can capture still images from the movie clip. 1. Select the recorded voice that you want to play back by using the Left / Right button. 2. Press the OK button to play back a recorded voice file. Play - To pause a recorded voice file, while playing it back, press the OK button again. - To resume playback of the voice file, press the OK button. - To rewind the voice file while it is playing, press the Left button.
LCD monitor Indicator The LCD monitor displays shooting information about the displayed image. No. Description Icon Page 1 Playback mode g p.59 2 Voice Memo p.75 3 DPOF p.76 4 Protect 5 Folder name & File name p.74 6 Memory indicator - 7 Battery p.15 100-0010 p.55 8 ISO 80~1600 p.41 9 Aperture value F3.5 ~ F15 - 10 Shutter speed 8 ~ 1/2,000 - 11 Flash On/Off p.34 12 Photo Size / Movie Size 4000x3000 ~ 320x240 p.39 13 Recording date 2010/01/01 p.
Using the camera buttons to set the camera Thumbnail ( In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Ê Searching or Deleting Files 1. Press the Thumbnail button in Smart Album. 2. Each time you press the Thumbnail button, the files in a category are displayed in Smart Album screen. 3. Select the file by pressing the Up / Down / Left / Right buttons. 4. Press the Delete(n) button to delete the selected file.
Thumbnail ( ) / Enlargement ( † ) button Ê Details of Each Category Category Type Date Color Week Description Ê The maximum enlargement rate in proportion to the image size File Format Categorized depending on the file type (e.g., picture, video, or voice) Categorized depending on the sequence of recorded dates. Pictures, Videos, Voice Categorized depending on the main color. Categorized depending on the sequence of recorded weeks. Ê Image enlargement 1.
Info (DISP) / Up button Play & Pause / OK button When the menu is displayed on the LCD monitor, the Up button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor.
Left / Right / Down / MENU button Delete ( n ) button Left / Right / Down / MENU buttons activate the following. This deletes images stored on the memory. - Left button : While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. - Right button : While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image.
Setting up the play back function using the LCD monitor Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or shutter button.
Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable.
Edit ( ) Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the MENU button. 2. Click the Up / Down button from the Edit menu to select [Resize] ( ) menu tab and press the OK button. 3. Select a desired sub menu by pressing the Left / Right button and press the OK button.
Edit ( ) After using [Edit] feature, the edited image will be saved as a smaller size than the original image. (Only with image size from 8M) Rotating an image You can rotate the stored images by various degrees. 1. Press the play mode button and press the MENU button. 2. Click the Up / Down button from the Edit menu to select [Rotate] ( ‹ ) menu tab and press the OK button. 3. Select a desired sub menu by pressing the Left / Right button and press the OK button.
Edit ( ) Ê Custom RGB Ê Red eye Removal You can change the R (Red), G (Green) and B (Blue) values of the image. - OK button : S elect / setup the Custom Color - Up / Down button : Selects R, G, B - Left / Right button : Change the values Red eye effect can be removed from the captured image. Back Move Back Ê Face Retouch You can make the skin in an image appear clear and beautiful.
Edit ( ) Ê Brightness control Ê Saturation control You can change the brightness of the image. 1. Select ( ) by pressing the Left / Right button and press the OK button. Then a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left / Right button. 3. Press the OK button and the image will be saved as a new file name. You can change the saturation of the image.
Starting the Multi Slide Show ( ) Images can be displayed continuously at preset intervals. You can view the Multi Slide Show by connecting the camera to an external monitor. Selecting Images 1. Press the play mode button and press the MENU button. 2. Press the Up / Down button and select the [Multi Slide Show] menu tab and press the OK button. 1. Use the Up / Down button to select the [Images] menu and press the Right button.
Starting the Multi Slide Show ( ) Configure Multi Slide show effects Setting play interval Unique screen effects can be used for the Multi Slide Show. 1. Select the [Effect] sub menu by pressing the Up / Down button and press the Right button. 2. Use the Up / Down button to select the type of effect. 3. Press the OK button to confirm the setting. Start Set the Multi Slide Show play interval. Effect Off :All Calm :Off Sweet Interval Rural:1 sec Music Vivid:Off Lively Images Back Set 1.
File Options ( ) 1. Press the play mode button and press the MENU button. 2. Press the Up / Down button and select the [File Options] menu tab and press the OK button. Deleting images This deletes images stored on the memory. 1. Press the Up / Down button and select Delete Select Protect the [Delete] menu tab. And then press the All Voice memo :Off Right button. DPOF 2. Select a desired sub menu by pressing the Copy to Card Up / Down button and press the OK button.
File Options ( ) [All] : Protect / release all saved images - If you protect an image, the protect icon will be displayed on the LCD monitor. (An unprotected image has no indicator) - An image in LOCK mode will be protected from the delete function or [Delete] function, but will NOT be protected from the [Format] function. Voice memo Protect All? Lock Unlock You can add your voice to a stored still image.
File Options ( ) DPOF POF(Digital Print Order Format) allows you to embed printing ÊD information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. he DPOF indicator will display on the LCD monitor when an image ÊT that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. his function is not available for Movie clips and Voice recording files.
File Options ( ) Ê Index Images (except for movie clips and voice files) are printed as index type. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Select the [Index] menu and press the Right button again. Sub menu will display. Delete Protect Voice memo Setting Index? DPOF Yes Copy to Card No :Off Standard Index Size Back Set 3. Select a desired sub menu by pressing the Up / Down button.
File Options ( ) Copy to Card å If there is not enough space available on the memory card to This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy to Card] menu tab by pressing the Up / Down button. And then press the Right button. Delete Protect Voice memo DPOF :Off Copy to Card 2. Select a desired sub menu by pressing Yes No the Up / Down button and press the OK Back Set button.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Ê Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Once the camera is turned on, the camera automatically recognizes the printer and is connected to it.
PictBridge : Picture Selection PictBridge : Print Setting You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print and File Name Print menus for printed pictures. Ê Setting the Number of Copies to Print 1. Press the MENU button and the Images :One Photo One Photo PictBridge menu will display. Size All:Auto Photos 2. Use the Up / Down button to select the Layout :Auto [Images] menu and press the Right Type :Auto button. Quality :Auto 3.
PictBridge : Reset Important notes Initializes user-changed configurations. Be sure to observe the following precautions! 1. Use the Up / Down button to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down button to select the desired sub menu and then press the OK button. Date :Auto File Name Reset :Auto No Yes No Back Set If [Yes] is selected : All print and image settings will be reset. If [No] is selected : Settings will not be reset.
Important notes åE xtremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator There are several warnings that may appear on the LCD display. [Card Error] åMemory card error à Turn off the camera power and turn it on again à Insert the memory card again à Insert and format the memory card (p.
Before contacting a service center Please check the following. The camera doesn’t switch on åThere is low battery capacity à Insert fresh battery (p.
Before contacting a service center The flash does not fire åFlash off mode has been selected à Disengage flash off mode åThe camera mode can't use the flash à Refer to the FLASH instruction (p.
Specifications Image Sensor - Type : 1/2.33" CCD - Effective Pixels : Approx. 12.2 Mega-pixels - Total Pixels : Approx. 12.3 Mega-pixels Flash Lens - Focal Length : SAMSUNG Lens f = 4.9 ~ 24.5mm (35mm film equivalent : 27 ~ 135mm) - F No. : F3.5(W) ~ F5.9(T) - Digital Zoom : ·Still Image mode :1.0X ~ 3.0X ·Play mode : 1.0X ~ 12.5X (depends on image size) - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off, Red-eye Fix - Range : Wide : 0.2m ~ 2.68m Tele : 0.5m ~ 1.
Specifications - Movie clip · With Audio or without Audio (user selectable, recording time : max 2 hours) ·Size : 640x480, 320x240 · Frame rate : 30 fps, 15 fps · 5X Optical Zoom and Mute in Zooming · Movie Editing (Embedded): Pause during recording, Still Image Capture Storage - Media ·Internal memory : About 9.
Specifications Power Source - Rechargeable battery : BP70A, 3.7V (740mAh) Ä Included battery may vary depending on sales region. Dimensions (WxHxD) - 96.3 X 58.3 X 21.7mm (excluding protrusions) Weight - Approx. 126.2g (without battery and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Intelli-studio, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
Transferring files to your computer (for Windows) For Windows users Ê Programs contained on the CD Transfer files by connecting your camera to your PC. Ê Installing programs Hardware and software requirements Item Requirements Program Purpose Intelli-studio Edit photos and videos. Adobe Reader View the user manual. å Using a self-assembled PC or a PC and OS that are not supported may void your warranty. CPU Intel® Pentium®4 3.0 GHz or higher AMD Athlon™ FX 2.
Transferring files to your computer (for Windows) 1. Insert the installation CD in a compatible CD-ROM drive. 2. When the setup screen is displayed, click Samsung Digital Camera Installer to start installation. Ê Transferring files to your PC Once you connect the camera to your PC, the camera will be recognized as a removable drive. å The battery will be charged while the camera is connected to a PC with the USB cable. 1. Connect your camera to your PC with the USB cable.
Transferring files to your computer (for Windows) 2. Turn on the camera. - The computer recognizes the camera automatically. å I f the camera fails to connect, a pop-up window will appear. Select Computer. Ê Disconnecting the camera (for Windows XP) The way to disconnect the USB cable for Windows Vista/7 is similar. 1. If the status lamp on your camera is blinking, wait until it stops. 2. Click on the tool bar at the bottom right of your PC screen. 3.
Transferring files to your computer (for Windows) Ê Using Intelli-studio Once you have installed the Intelli-studio on your PC, the Intelli-studio starts automatically when a camera is connected with your PC. If the Intelli-studio does not start after you have connected the camera to your PC, double-click the Intelli-studio icon on your Windows desktop. The Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.
Transferring files to your computer (for Windows) Icon Description 1 Open menus 2 Display files in the selected folder 3 Change to the Photo edit mode 4 Change to the Video edit mode 5 Change to the Sharing mode (You can send files by email or upload files to websites, such as Flickr or YouTube.
Transferring files to your computer (for Mac) 2. Turn on the camera. -T he computer recognizes the camera automatically and a removable disk icon will be displayed. 3. Double click the removable disk icon. 4. Transfer photos or videos to the computer.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Ã Connect the supplied USB cable. Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Ã Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer. Ã Turn the camera power off and on again.
FAQ FCC notice Ê When the DirectX 9.0c or later is not installed à Install the DirectX 9.0c or later 1) Insert the CD provided with the camera 2) R un the windows explorer and select the [CD-ROM drive:\ DirectX] folder and click the DXSETUP.exe file. The DirectX will be installed. Visit the Microsoft website for downloading the DirectX. Ê NOTE: Ê If a PC connected with the camera stops responding while Windows is starting. à I n this case, disconnect the PC and the camera and Windows will start.
FCC notice Ê Declaration of Conformity Trade Name : SAMSUNG ELECTRONICS AMERICA, INC. Model No. : Samsung SL605 Responsible Party : SAMSUNG ELECTRONICS AMERICA, INC. Address : 105 Challenger Road Ridgefield Park NJ Telephone No. : 1-800-SAMSUNG(726-7864) his device complies with Part 15 of the FCC Rules.
Vet.Ol Software CD-ROM For Windows XI' I Visla f 7 www.
LATIN AMERICA ARGENTINA BRA2IL CHILE COLOMBIA MEXICO PANAMA PARAGUAY PERU URUGUAY VENEZUELA T, 0800 333 3733 Samsung Electronics do Amazonia R_THOMAS NILSEN JUNIOR 150 1°, BAIRRO PARQUE IMPERADOR, CAMPINA5, S.P cep:13097-105 Samsung Electronics Chile LTDA. Avda. Americo Vespucio Sur 100, Oficina 102 Las Condes, Santiago, Chile T 0800-124-421 T 4004-0000 SAMSUNG ELECTRONIS COLOMBIA S.A Kr 7 # 113- 43 Oficina 606 Samsung Eletronics Mexico Via Lopez Portillo No.6 Col.
SAMSUNG CAMERAS INTERNATIONAL SERVICE AGENTS (WWW.SAMSUNG.COM) COUNTRY KOREA ADDRESS 6801-001646 (20) EUROPE TEL. Samsung Digital Imaging Co., Ltd. 416, Maelan-3Dong, Yeongtong-Gu, Suwon-Cily, Gyeonggi-Do, Korea 443-742 T: 1588-7276 (Korea Only) 82-31-8006-8248/8237 (Inl'l Call) F : 82-31-8006-8288 AUSTRIA SAMSUNG Electronics Austria GmbH Praterstrasse 31, 14.0G A-1 020 Vienna Austria T: 0810 - SAMSUNG (7267864, € 0.07/min) BELGIUM Samsung Electronics Benelux B.V.