User`s guide

41
Scanning with network
1 Make sure that your machine and computer are turned on.
2 Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3 Start Applications and click Image Capture .
4 Click Devices and click Browse Devices .
5 For MAC OS X 10.4:
Select your machine in
Twain devices option. Make sure
that Use TWAIN software checkbox is checked, and click
Connect .
For MAC OS X 10.5:
Make sure that
Connected checkbox is checked beside
your machine in Bonjour Devices .
If you want to scan using TWAIN, refer to the MAC OS X
10.4 procedure above.
6 Set the scan options on this program.
7 Scan and save your scanned image.
N OTE :
• If scanning does not operate, update Mac OS to the latest
version. Scanning operates properly in Mac OS 10.3.9 or
higher and Mac OS 10.4.7 or higher.
• If you want to scan via the DADF, use TWAIN-compliant
softwares.
• For more information about using
Image Capture , please
refer to the
Image Capture ’s help.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
• Scan process differ according to TWAIN-compliant
softwares. Please refer to the user’s guide of the software.
Setting scan information in Scan
Manager.
You can find out about Scan Manager program information
and installed scan driver's condition. Also, you can change scan
settings and add or delete the folders where scanned
documents to computer are save in
Scan Manager program.
1 Open Scan Manager in Smart Panel menu on Status
bar.
2 Set Scan Button allows you to change the saving
destination and scan settings, add or delete application
program and format files. You can change the scanning
machine by using Change port . (Local or Network)
3 Press OK after setting is done.