Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente Country Customer Care Center Web Site CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca U.S.A 1-800-SAMSUNG (7267864) www.samsung.com Address Samsung Electronics Canada Inc.
A Guide to Digital TV ● What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast.
Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.
Contents English General Information ■ ■ ■ ■ ■ ■ ■ Channel Control Viewing Position....................................................................... 5 List of Features........................................................................ 5 Checking Parts......................................................................... 6 Viewing the Control Panel........................................................ 6 Viewing the Connection Panel.................................................
General Information Viewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. < Top view> < Side view> 61˝ screen : At least 7.2 feet 61˝ screen : At least 7.2 feet 67˝ screen : At least 8.0 feet ➢ 67˝ screen : At least 8.0 feet When installing the product, make sure to keep it away from the wall (more than 10cm / 4inches) for ventilation purposes.
Checking Parts Owner’s Instructions Remote Control (BN59-00673A)/ AAA Batteries Warranty Card/ Safety Guide Manual/ Quick Guide Manual (Not available in all locations) Power Cord (3903-000144) Cloth-Clean Sold Separately S-Video Cable Video Cable Antenna Cable Component Cables Audio Cables D-Sub Cable PC Audio Cable HDMI/DVI Cable HDMI Cable Optical Cable 3.
1 SOURCE Toggles between all the available input sources (TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2, HDMI3/DVI or USB). 2 MENU Press to see an on-screen menu of your TV’s features. 3 + VOL – Press to increase or decrease the volume. In the on-screen menu, use the + VOL – buttons as you would use the ◄ and ► buttons on the remote control. 4 ➢ 5 (ENTER) Press to confirm a selection. 6 Indicator Lights Blinks and turns off when the power is on and lights up in stand-by mode.
Viewing the Connection Panel Side Panel Jacks Use the side panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 10~16. ➢ The product color and shape may vary depending on the model. 1 ANT IN 8 S-VIDEO 75Ω Coaxial connector for Air/Cable Network. Video input for external devices with an S-Video output, such as a Camcorder or VCR.
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER ^ Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “ ” and “3”. W.LINK MUTE 5 CH LIST Press to temporarily cut off the sound. 6 W.
Installing Batteries in the Remote Control 1 2 3 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. ➢ ● Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. ● Do not mix battery types, i.e. alkaline and manganese. Close the cover as shown in the figure. ➢ Remove the batteries and store them in a cool and dry place if you won’t be using the remote control for a long time.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the side of the TV. ➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1 2 Find the cable that is connected to the ANT OUT terminal on your cable box. ➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable between the HDMI IN (1, 2 or 3) on the TV and the HDMI jack on the DVD Player or Cable Box / Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Componet cables The side panel jacks on your TV make it easy to connect a DVD Player/Cable Box/Satellite receiver (Set-Top Box) to your TV. 1 Connect Component Cables between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box / Satellite receiver(Set-Top Box).
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 10~11). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
Connecting a Digital Audio System The side panel jacks on your TV make it easy to connect a Digital Audio System to your TV. 1 Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jack on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. TV Side Panel Digital Audio System When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV, and adjust the volume level with the system’s volume control.
Connecting a PC Using the D-Sub Cable 1 Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. Using the D-Sub Cable TV Side Panel PC PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 1 Connect a HDMI/DVI cable between the HDMI3/DVI IN jack on the TV and the PC output jack on your computer.
Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug and play feature. The TV will store these settings in memory. Storing the channels in memory will allow you to scan the stored channels rather than have to enter their digits each time you want to change channels. When the TV is initially powered on, basic settings proceed automatically: Plug & Play 1 Press the POWER button on the remote control.
5 The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. The Clock Mode menu is displayed. ➢ Plug & Play Auto Program in Progress. DTV Air : -Air : -DTV Cable : -- Cable : -- To stop the search before it has finished, press the ENTER button with stop selected. Air 3% Stop Enter Skip Enter Skip Plug & Play Auto Program is incomplete.
If you want to reset this feature... 1 2 Press the ENTER button to select Plug & Play. For further details on setting up options, refer to the pages 17~18. ➢ The Plug & Play feature is only available in the TV . Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
TV Adjusting the Volume POWER TV Using the Volume Buttons 1 Press the VOL W.LINK or VOL W.LINK ON/OFF ON/OFF PRE-CH button to increase or decrease the volume. MUTE CH LIST CH LIST SOURCE Using the Mute Button At any time, you can cut off the sound using the MUTE button. CH LIST W.LINK W.LINK CH LIST CH LIST RETURN MUTE TV or TOOLS RED MENU The display identifies the current channel and the status of certain audio-video settings. E.
POWER Using the TOOLS Button TV ON/OFF You can use the TOOLS button to select your frequently used functions quickly and easily. The TOOLS menu changes depending on which external input mode you are viewing. 1 2 Press the TOOLS button. The TOOLS menu will appear. TOOLS Device List Picture Mode : Sound Mode : Sleep Timer : Press the ▲/▼ button to select a menu, then press the ENTER button. 3 Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.
Storing Channels in Memory (Automatic Method) 1 Antenna Channel Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button. : Air Auto Program ► Channel List Clear Scrambled Channel 2 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. 3 Press the ▲ or ▼ button to select an antenna connection, then press the ENTER button. ➢ Air: Air antenna signal. Cable: Cable antenna signal. Auto: Air and Cable antenna signals.
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. 1 Input Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. Source List Edit Name 2 Press the ENTER button to select Source List. Press the ▲ or ▼ button to select the signal source, then press the ENTER button.
Picture Control Changing the Picture Standard 1 Picture You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER button to select Picture. Picture 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Dynamic, Standard, or Movie. Press the ENTER button. • Dynamic: Select the picture for high-definition in a bright room.
Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings 1 Press the MENU button to display the menu. Press the ENTER button to select Picture. Picture 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Standard or Movie, then press the ENTER button.
Activating Gamma You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3) Gamma 0 10 Press the ▲ or ▼ button to select Gamma, then press the ENTER button. 11 Press the ◄ or ► button to decrease or increase the value. Press the ENTER button. Adjust Activating White Balance 12 Press the ▲ or ▼ button to select White Balance, then press the ENTER button. 13 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Activating xvYCC Setting the xvYCC mode to On increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. 19 Press the ▲ or ▼ button to select xvYCC, then press the ENTER button. Detailed Settings Dynamic Contrast : Low LED Control : Auto Gamma :0 White Balance Flesh Tone :0 Edge Enhancement : On xvYCC : Off 20 Press the ▲ or ▼ button to select Off or On. Press the ENTER button.
Changing the Screen Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your cable box or satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. 1 Follow the Activating Picture Options instructions numbers 1 and 2.
16:9 Sets the picture to 16:9 wide mode. Zoom1 The screen size when Wide screen is vertically enlarged. Zoom2 The screen size when the Zoom1 screen is vertically enlarged. Wide Fit Enlarges the aspect ratio of the picture to fit the entire screen. 4:3 Sets the picture to 4:3 normal mode. Just Scan Use this function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or DTV(1080i),Component(1080i/ 1080p) signals are input.
DNIe (Digital Natural Image engine) This TV includes the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. 1 2 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ▲ or ▼ button to select DNIe, then press the ENTER button.
Setting the Film Mode The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. 1 2 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ▲ or ▼ button to select Film Mode, then press the ENTER button.
Setting the Color Gamut You can choose your favorite color gamut. Color gamut means a color matrix made up with the basic colors of Red, Green and Blue. 1 2 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 27) Press the ▲ or ▼ button to select Color Gamut, then press the ENTER button.
➢ ➢ ➢ ➢ To use the 3D Effect function, a graphics card supporting 3D or 3D software is required. 3D glasses (including the Emitter) not manufactured by Samsung, RealD, or ilixco may not be supported. The 3D glasses and the Emitter must be manufacturer by the same company. If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or a headache. Changing the Mode Picture Options Provides the function to turn on the 3D Effect.
Viewing Picture-in-Picture You can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source. (See page 40 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in the same mode. Please see ‘PIP Settings’ below for details. ➢ While V-Chip (See page 57) is in operation, the PIP function cannot be used. Activating Picture-in-Picture 2 Press the MENU button to display the menu.
Changing the Position of the PIP Window 4 Press the ▲ or ▼ button to select Position, then press the ENTER button. Press the ▲ or ▼ button to select the desired PIP window position, then press the ENTER button. ➢ In Double Window ( be selected. ) and Double Wide ( ) modes, Position cannot PIP PIP : Size : On Position : Air/cable : Cable Channel : Cable 3 Enter Move Return Air/Cable 5 Press the ▲ or ▼ button select Antenna, then press the ENTER button.
Sound Control You can select the sound mode to best suit the programming you're watching. 1 Sound Using Automatic Sound Settings Mode Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Press the EXIT button to exit. Sound 2 Press the ENTER button to select Mode. Press the ▲ or ▼ button to select Standard, Music, Movie, Speech, or Custom sound setting, then press the ENTER button.
Resetting the Equalizer Settings to the Factory Defaults 5 Press the ▲ or ▼ button to select Reset, then press the ENTER button. Equalizer ▲ The equalizer resets to the factory defaults. Press the EXIT button to exit. ➢ Balance L R 100Hz - + 300Hz - + 1kHz - + 3kHz - + 10kHz - + Reset ► Move Enter Return Custom mode returns to default settings. Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.
POWER Choosing Preferred Language TV ON/OFF The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). Preferred language SRS TruSurround XT Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Sound 1 Equalizer Multi-Track Sound Auto Volume Press the ▲ or ▼ button to select Preferred Language, then press the ENTER button.
Automatic Volume Control Reduces the difference in volume level among broadcasters. 1 Sound Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. 2 Press the ▲ or ▼ button to select Auto Volume, then press the ENTER button. 3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. 1 Sound Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Auto Volume : Off TV Speaker : On Sound Select : Main ► Sound Reset 2 Press the ▲ or ▼ button to select Sound Select, then press the ENTER button. 3 Press the ▲ or ▼ button to select Main or Sub, then press the ENTER button.
Channel Control Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channel List function, first run Auto Program (see page 22). 1 Auto Program Clear Scrambled Channel Channel Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button.
Erasing and Adding Channels You can delete or add a channel to display the channels you want. 2 Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Press the ◄ button to select Added Channels. 4 P ress the ▲ or ▼ button to select a channel to delete, then press the TOOLS button.
Setting Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Press the ◄ button to select Added Channels. 3 Press the ▲ or ▼ button to select All Channels, then press the ENTER button. Shows all currently available channels.
Reserving a Program (Time Viewing) If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. (See pages 51~52). Reserved chanels can only be set if they are in the Channel List (See page 44). 1 Auto Program Clear Scrambled Channel Channel Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Confirming a Viewing Reservation You can view, modify or delete a reservation. 1 Auto Program Clear Scrambled Channel Channel Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Channel List ► Fine Tune 2 Press the ◄ button to select Added Channels. Signal Strength 3 Press the ▲ or ▼ button to select Programmed, then press the ENTER button. You can view the program reservations.
Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. 1 Auto Program Clear Scrambled Channel Channel Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. Channel List ► Fine Tune Signal Strength 2 Press the ▲ or ▼ button to select the channel to be assigned a new name, then press the TOOLS button.
Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20-30 minutes. 1 Auto Program Channel Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ▲ or ▼ button to select Clear Scrambled Channel, then press the ENTER button. It searches scrambled channels, which are to be removed from the list.
Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels. 1 2 Press the ▲ or ▼ button to select Signal Strength, then press the ENTER button.
PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.
Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. 1 The message Auto Adjustment in progress. Please wait. appears on the Picture screen and the picture adjustments are automatically activated. Press the EXIT button to exit. ➢ ➢ This function does not work in DVI-Digital mode.
POWER Sharpness : 50 TV Adjust the PC's screen positioning if it does not fit the TV Screen. ➢ Preset: Press the SOURCE button to select PC mode. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. Press the ▲ or ▼ button to select Screen, then press the ENTER button.
Time Setting Setting the Time Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1 Plug & Play Language Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button.
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Plug & Play Language Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. : English Time ► V-Chip Caption External Settings Entertainment : Off PIP SW Upgrade 2 Press the ENTER button to select Clock.
Setting the On/Off Timer Use this feature to set the TV to turn on or off at a desired time. You must set the clock first. 1 Plug & Play Language Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. : English Time ► V-Chip Caption External Settings Entertainment : Off PIP SW Upgrade 2 Three different On/Off Timer Settings can be made.
Setting the Sleep Timer Plug & Play 1 Language Setup The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). : English Time Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button.
Function Description Selecting a Menu Language 1 Plug & Play Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Language, then press the ENTER button. Language : English ► Time V-Chip Caption External Settings Entertainment : Off PIP SW Upgrade Press the EXIT button to exit.
Using the V-Chip U.S.A Only This product is covered by the following U.S. patents : US4,930,158 US4,930,160 The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. ➢ V-Chip function is not available in HDMI, Component or PC mode. Setting Up Your Personal ID Number (PIN) 1 Language : English Time Setup Press the MENU button to display the menu.
How to Enable/Disable the V-Chip 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip Enter PIN 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. * * * * 0~9 Enter PIN 3 The V-Chip screen will appear. To enable the V-Chip feature, press the ENTER button so that the V-Chip Lock field is On.
4 The TV Parental Guidelines screen will appear. Press the ▲ or ▼ button to select one of the six aged based categories: TV Parental Guidelines Allow All Block All • TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six. • TV-Y7: Directed to older children. The themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven.
How to Set up Restrictions Using “MPAA Ratings” (G, PG, PG-13, R, NC-17, X, NR ) The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). 1 Language : English Time Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
How to Set up Restrictions Using “Canadian English” 1 Language : English Time Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip ► Caption External Settings Entertainment : Off PIP SW Upgrade 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. V-Chip Enter PIN * * * 0~9 Enter PIN 3 The V-Chip screen will appear.
How to Set up Restrictions Using “Canadian French” 1 Language : English Time Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip ► Caption External Settings Entertainment : Off PIP SW Upgrade 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number. V-Chip Enter PIN * * * 0~9 Enter PIN 3 The V-Chip screen will appear.
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1 Language : English Time Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. V-Chip ► Caption External Settings Entertainment : Off PIP SW Upgrade 2 Press the ▲ or ▼ button to select V-Chip, then press the ENTER button. The message Enter PIN will appear. Enter your 4 digit PIN number.
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: 1 W.LINK CH LIST 2 Press the ENTER button to select OK. To resume normal viewing, tune to a different channel using CH or CH button. Under certain conditions (depending on the rating of the local TV W.LINK programs) the V-Chip might lock out all the channels.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1 Time V-Chip Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Caption ► External Settings 2 Press the ▲ or ▼ button to select Caption, then press the ENTER button. Entertainment : Off PIP SW Upgrade 3 Press the ENTER button to select Caption.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1 Time V-Chip Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Adjusting the TV On/Off Melody Sound The TV power on/off melody sound volume can be adjusted. 1 V-Chip Caption Setup Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Entertainment 2 Press the ▲ or ▼ button to select External Settings, then press the ENTER button. 3 Press the ENTER button to select Melody. Press the ▲ or ▼ button to select Off, Low, Medium, or High, then press the ENTER button.
Setting the Entertainment mode The Entertainment mode enables you to select the optimal display and sound for sports, cinema and games. 1 2 Press the ▲ or ▼ button to select Entertainment, then press the ENTER button. 3 Press the ▲ or ▼ button to select Off, Sports, Cinema or Game, then press the ENTER button. ➢ External Settings TVEntertainment ON/OFF : Off If you set any of the three Entertainment modes to On, the settings will be locked and can not be adjusted.
Upgrading the Software Samsung may offer upgrades for your TV’s firmware in the future. Please contact the Samsung call center at 1- 00-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the side of your TV. 1 Insert a USB drive containing the firmware upgrade into the USB Upgrade Port on the side of the TV. ➢ TV Side Panel Software can not be upgraded through the LAN connection.
WISELINK This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC) device. 1 Press the POWER button on the remote control or front panel. ➢ TV Side Panel The TV is powered on. Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB jack) on the side of the TV. ➢ If you enter the WISELINK mode with no USB device connected the message “No external storage device found. Check the connection status.” will appear.
POWER TV ON/OFF Using the WISELINK Menu 1 Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTER button. WISELINK USB POWER PHOTO TV Press the ▲ or ▼ button to select WISELINK, then press the ENTER button. ➢ The WISELINK menu is diplayed. Press the W.LINK button on the remote control to display the WISELINK menu. PRE-CH ON/OFF MUTE SOURCE Music Photo USB 851.98MB/995.00MB Free Device Setup Exit CH LIST MENU W.
Using the Photo List This menu shows Photo files and folders saved on an USB memory device. Photo List 1 Press the W.LINK button on the remote control to display the WISELINK menu. WISELINK 851.98MB/995.00MB Free USB PHOTO 2 Press the ◄ or ► button to select Photo, then press the ENTER button. ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed. Photo files are displayed.
7 Help Items • Red(Device) button: Selects a connected device. • Green(Favorites Setting) button: Changes the favorites setting for the selected photo. Press this button repeatedly until the desired value appears. (Refer to page 73) • Yellow(Select) button: Selects photos from the photo list. Selected photos are marked with a symbol on the left. • TOOLS(Option) button: Displays the Slide Show, Play Current Group, Delete, Change Group info (in Color or Composition group), Information or Safe Remove menus.
Sorting photos by month 1 Photo Select Monthly as the sorting standard in the Photo List. 2 Press the ◄ or ► buttons to select from the sublist of files grouped by Month. 3 Press the Tools button. image_1.jpg Month Date Color Composition Folder Favorite : Jan : Jan.01.2008 Slide Show : Gray Play Current Group : : P-other : ★ ★ ★ Delete Information Preference Monthly Jan 4 Press the ▲ or ▼ button to highlight Play Current Groups.
Changing the color information 1 Select Color as the sorting standard in the Photo List and press the ◄ or ► button to select a photo. ➢ Changing the information of multiple files Press the ◄ or ► button to select the desired photo in the Photo list. Then press the yellow button. Repeat the above operation to select multiple photos. The mark appears to the left of the selected photo. 2 Press the TOOLS button. 3 Press the ▲ or ▼ button to select Change Group info. Press the ENTER button.
Deleting the Photo files 1 Press the ◄ or ► button to select the desired photo in the Photo list. 2 Press the TOOLS button. 3 Press the ▲ or ▼ button to select Delete, then press the ENTER button. ➢ The Selected File(s) :IMG_0 ... 1 File(s) Delete this file? message appear.s ➢ When a read-only file is deleted, the This is read only file. Delete this file? message appear. 4 Press the ◄ or ►button to select OK, then press the ENTER button. ➢ The photo is deleted.
Viewing a Photo or Slide Show Viewing a photo 1 Press the W.LINK button on the remote control to display the WISELINK menu. image_1.jpg 440x440 104.1KB 2008/1/1 2 P ress the ◄ or ► button to move to Photo, then press the ENTER button. ➢ Photo files are displayed. 3 Press the ◄ or ► button to select the desired photo in the Photo list. 4 Press the ENTER button over a photo icon. ➢ The currently selected photo is displayed in full screen.
Using the option menu during a slide show (or Viewing a Photo) 1 During a slide show(or viewing a photo), Press the TOOLS button to set the option. Press the ▲ or ▼ button to select the desired option. Then press the ENTER button. Start Slide Show (Stop Slide Show) You can start or stop a Slide Show. Press the ▲ or ▼ button to select Start Slide Show (or Stop Slide Show), then press the ENTER button.
Zoom You can zoom into images in full screen mode. Press the ▲ or ▼ button to select Zoom, then press the ENTER button. Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect. (x1 → x2 → x4) To move the enlarged photo image, press the ENTER button, then press the ▲/▼/◄/► buttons. ➢ Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work. ➢ ➢ ➢ The enlarged file is not saved.
Background Music Setting You can set the background music. Press the ▲ or ▼ button to select Background Music Setting, then press the ENTER button. ➢ If you turn off the Background Music, even if the Background Music Settings have been set up, the background music will not be played. ➢ Loading music files is needed to change BGM mode. Play music files in music category to load. ➢ Background Music setting menu is displayed. Press the ◄ or ► button to select the desired BGM(Background music) mode.
Using the Music List This menu shows MP3 files from among the files saved on a USB memory device. 1 Press the W.LINK button on the remote control to display the WISELINK menu. WISELINK USB 851.98MB/995.00MB Free Music 2 Press the ◄ or ► button to select Music, then press the ENTER button. ➢ ➢ Music files are displayed. To select a file on the previous / next group, press the (FF) button to move to the previous / next group. (REW) or Photo USB Music Device Setup Exit W.LINK Music W.
Sorting Music List You can sort music files in the Music List by a particular standard. 1 Press the W.LINK button on the remote control to display the WISELINK menu. 2 Press the ◄ or ► button to select to Music, then press the ENTER button. ➢ Music files are displayed. 3 Press the ▲ or ▼ button to select a sorting standard. (Title, Artist, Mood, Genre, Folder, Preference) • Title: Sorts music files by the title. ➢ It sorts the Music titles in alphabetical order, and shows the music file.
Sorting music files by genre 1 Music Select Genre as the sorting standard in the Music List. Gold 2 Press the ◄ or ► button to select from the sublist of files grouped by genre. 3 4 Press the ▲ or ▼ buttons to highlight Play Current Group 5 Press ENTER button to play the selected group of music files from the sublist. Sorting music files by folder 1 Once Ost 2007 Soundtrack ★★★ Black Capricorn Day Sad Information ★★★ Synkronized 1999 Acid Jazz Exciting ★★★ Genre Mood Blues ▲ ...
Deleting the Music files 1 Press the ◄ or ► button to select the desired music file in the music list. 2 3 Press the TOOLS button. Press the ▲ or ▼ button to select Delete, then press the ENTER button. ➢ The (for example) Selected File(s) :music_0 ... 1 File(s) Delete this file? message appear. ➢ When read-only files is deleted, the This is read only file. Delete this file? message appear. 4 Press the ◄ or ►button to select OK, then press the ENTER button. ➢ The music is deleted.
Playing a Music File Playing a music file 1 Press the W.LINK button on the remote control to display the WISELINK menu. Music If Everyone Cared 2 Press the ◄ or ► button to select Music, then press the ENTER button. 3 Pressing the ENTER button to select a music file to be played, then press the ENTER button. ➢ This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if they are saved on the same USB device.
Playing the selected music files 1 Music Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select Music, then press the ENTER button. Press the ◄ or ► button to select the desired music file, then press the yellow button. Repeat the above operation to select multiple music files. ➢ The mark appears to the left of the selected music files. Press the ( 2File(s) Selected If Everyone Cared If You Want Me Lies Nickelback Marketa lrgl...
Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1 Press the W.LINK button on the remote control to display the WISELINK menu. 2 Press the ◄ or ► button to select Setup, then press the ENTER button. 3 Press the ▲ or ▼ button to select the desired option. (Slide Show Speed, Music Repeat Mode, Screen Saver Run Time, Information, Safe Remove) 4 Press the ◄ or ► button to select the option, then press the ENTER button.
About Anynet+ What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. To connect to a TV TV Anynet+ Device 1 Anynet+ Device Anynet+ Device HDMI 1. Cable HDMI 1.
Setting Up Anynet+ The following settings help set the Anynet+ functions. To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1 2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button. 3 Press the ▲ or ▼ button to select On, then press the ENTER button. ➢ The Anynet+ (HDMI-CEC) function is enabled. ➢ If you select Off, Anynet+ (HDMI-CEC) is disabled. ➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Device List Displays the Anynet+ device list. Recording: (Device_Name) Starts a recording. (This menu works only for a device supporting recording.) (Device_Name) Menu Shows the menu of the connected device. Example: When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. 1 Press the TOOLS button. Press the ▲ or ▼ button to select Receiver, then press the ENTER button. 2 Press the ◄ or ► button to select to On, then press the ENTER button. Now you can listen to sound through the receiver. 3 Press the EXIT button to exit.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture quality. Poor sound quality. No picture or sound. No sound or sound is too low at maximum volume. Picture rolls vertically. The TV operates erratically. The TV won’t turn on. Remote control malfunctions Digital broadcasting screen problem. Possible Solution Try another channel.
Cleaning and Maintaining Your TV Please follow these guidelines to get the maximum performance from your TV. Placement ● ● ● ● Do not put the TV near extremely hot, cold, humid or dusty places. Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners. Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper. Place the TV in a vertical position only. Liquids ● Do not handle liquids near or on the TV.
Technical Specifications The descriptions and characteristics in these owner’s instructions are given for information purposes only and are subject to modification without notice. Model Name Screen Size (Diagonal) PC Resolution HL61A750A1F HL67A750A1F 61 inch (60.9 inches measured diagonally) 67 inch (66.
This product uses parts of the software from the Independent JPEG Group. This product uses parts of the software owned by the Freetype Project (www.freetype.org). This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to vdswmanager@samsung.com.
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11.
GNU Lesser General Public License (LGPL) Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope.
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded.
Guía para la TV Digital ● Qué es la televisión digital? La televisión digital (DTV) es una nueva forma de transmitir vídeo y audio de calidad al equipo de TV. Con la DTV, las emisoras pueden transmitir imágenes de TV de alta definición (HDTV), audio digital Dolby Surround y nuevos servicios como multiemisión (transmisión de más de un programa en el mismo canal de TV) y emisión de datos. Algunos de estos servicios pueden combinarse en una emisión digital única.
Preguntas y respuestas 1. Es la antena que utiliza para recepción de TV lo suficientemente buena para DTV? funciona bien con muchas antenas de TV existentes. Sin embargo, las asignaciones de canales de las emisiones de DTV son diferentes que los canales analógicos. Debe descubrir si las emisiones de DTV locales están en VHF (canales 2-13) o UHF (canales 14-69) para ver si necesita una antena diferente.
Índice Información general Español ■ ■ ■ ■ ■ ■ ■ Posición de visualización.......................................... 5 Características.......................................................... 5 Comprobación de los componentes.......................... 6 Aspecto general del panel de control........................ 6 Aspecto general del panel de conexiones................. 8 Mando a distancia..................................................... 9 Instalación de las pilas en el mando a distancia.....
Información general Posición de visualización Para conseguir la mejor calidad de visualización, siga las directrices siguientes referentes a la distancia de visualización. Siéntese lo más lejos posible de la pantalla si va a mirarla durante un período prolongado. Pantalla de 61˝: Al menos a 7.2 metros Pantalla de 61˝: Al menos a 7.2 metros Pantalla de 67˝: Al menos a 8.0 metros ➢ Pantalla de 567˝: Al menos a 8.
Comprobación de los componentes Manual de instrucciones Mando a distancia/ (BN59-00673A)/ pilas AAA Tarjeta de garantía/ Manual de seguridad/ Manual de referencia rápida/ (no esta disponible en todas laslocalidades) Cable de alimentación (3903-000144) Paño de limpieza Sold Separately Cable de S-Vídeo Cable de vídeo Cable de la antena Cables de componentes Cables de audio Cable D-Sub Cable de audio de PC Cable HDMI/DVI Cable HDMI Cable óptico Miniclavija estéreo de 3,5 mm/2 RCA Aspecto gene
1 SOURCE Cambia entre todas las fuentes de entrada disponibles (TV, AV1, AV2, S-Video, Componente1, Componente2, PC, HDMI1, HDMI2/DVI, HDMI3 o USB). 2 MENU Púlselo para ver un menú en pantalla con las opciones del televisor. 3 + VOL – Púlselos para subir o bajar el volumen. En el menú en pantalla, utilice los botones + VOL – de igual modo que los botones ◄ y ► del mando a distancia. 4 ➢ 5 (ENTER) Se pulsa para confirmar una selección.
Aspecto general del panel de conexiones Tomas del panel lateral Use las tomas del panel lateral para conectar componentes de A/V que estarán disponibles permanentemente, como un vídeo o un reproductor de DVD. Si precisa información sobre la conexión de equipos, consulte las páginas 10~16. ➢ El color y la forma del producto pueden variar según el modelo. 1 ANT IN Conector coaxial de 75Ω para antena o red por cable.
Mando a distancia Puede utilizar el mando a una distancia de hasta 7 metros del televisor. Al usarlo, apunte directamente al televisor. También se puede utilizar el mando a distancia para hacer funcionar el aparato de vídeo, el decodificador de cable, el reproductor de DVD y el decodificador. W.LINK CH LIST 1 POWER Enciende y apaga el televisor. 2 TV Selecciona directamente el modo TV. 3 BOTONES NUMÉRICOS Se utilizan para cambiar el canal.
Instalación de las pilas en el mando a distancia 1 2 3 Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. Instale dos baterías de tamaño AAA. ➢ ● Asegúrese de respetar los extremos “+” y “–” de las pilas indicados en el diagrama del interior del compartimento. ● No mezcle distintos tipos de pilas, por ejemplo alcalinas y de manganeso. Cierre la tapa, como se muestra en la ilustración.
Conexión de TV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. Cable sin decodificador 1 Enchufe el cable de entrada en el terminal ANT IN en el lateral del televisor. ➢ Dado que el TV tiene previsto el uso de televisión por cable, no se necesita un decodificador para ver canales de cable no codificados. Conexión al decodificador que decodifica todos los canales 1 2 Busque el cable conectado al terminal ANT OUT del decodificador.
Conexión de un reproductor de DVD o receptores de televisión por cable/ satélite (decodificadores) a través de HDMI Esta conexión sólo se puede realizar si hay una toma de salida de HDMI en el dispositivo externo. Esta conexión proporciona una imagen de la mayor calidad. 1 Conecte un cable HDMI entre el terminal HDMI IN (1, 2 o 3) del televisor y el terminal HDMI del reproductor de DVD o del receptor de televisión por cable/satélite (decodificador).
Conexión de un reproductor de DVD o receptores de televisión por cable/ satélite (decodificadores) a través de los cables de componentes Las tomas del panel posterior del televisor facilitan la conexión al televisor de un reproductor de DVD/receptor de cable/satélite (decodificador).
Conexión de un aparato de vídeo Conexión de vídeo En estas instrucciones se asume que ya ha conectado el TV a una antena o a un sistema de TV por cable (de acuerdo con las instrucciones de las páginas 10 y 11). Ignore el paso 1 si aún no ha conectado una antena o un sistema de cable. 1 Desenchufe el cable o la antena de la parte posterior del TV. Conecte el cable o la antena al terminal ANT IN en la parte posterior del aparato de vídeo.
Conexión de un sistema de audio digital Las tomas del panel lateral del televisor facilitan la conexión de un sistema de audio digital al televisor. 1 Conecte un cable óptico entre el terminal DIGITAL AUDIO OUT (OPTICAL) del televisor y el terminal Digital Audio Input (OPTICAL) del sistema de audio digital.
Conexión a un PC Uso del cable D-Sub 1 Conecte un cable D-Sub entre el terminal PC IN [PC] del televisor y el terminal de salida PC del ordenador. Conecte un cable de audio PC entre el terminal PC IN [AUDIO] del televisor y el terminal de salida de audio de la tarjeta de sonido del ordenador.
Función Plug & Play La primera vez que se enciende el nuevo televisor, se debe elegir la configuración básica del idioma, fuente de entrada y canales, y la hora del día por medio de la función plug and play. El televisor almacenará esta configuración en la memoria. El hecho de almacenar los canales en la memoria permite buscar los canales almacenados sin tener que introducir el número del canal cada vez que se desea cambiarlo.
5 El televisor empezará a memorizar todos los canales disponibles. Una vez los haya guardado, volverá a aparecer el menú Prog. Auto. Pulse el botón ENTER cuando se complete la memorización de canales. Aparece el menú Modo Reloj. Plug & Play La programación automática está en progreso. Aéreos : -Aire : -DTV Cable : -- Cable : -- ➢ Para detener la búsqueda antes de que finalice, pulse el botón ENTER con Aire 3% Detener la opción de detener seleccionada.
Si desea reiniciar esta función... 1 2 Pulse el botón ENTER para seleccionar Plug & Play. Si desea más detalles sobre las opciones de configuración, consulte las páginas 17 y 18. ➢ La función Plug & Play está disponible sólo en el modo TV. Configuración Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración; a continuación pulse el botón ENTER.
TV Ajuste del volumen POWER TV Utilización de los botones de volumen 1 Pulse los botones VOL W.LINK W.LINK o VOL ON/OFF ON/OFF PRE-CH para subir o bajar el volumen. MUTE CH LIST CH LIST SOURCE Utilización del botón Mute Puede interrumpir el sonido en cualquier momento pulsando el botón MUTE. CH LIST 1 POWER TOOLS 2 W.LINK Pulse el botón MUTE y se corta el sonido. Mute se visualizará en la pantalla. MENU W.
POWER Uso del botón TOOLS TV ON/OFF Se puede usar el botón TOOLS para seleccionar rápida y fácilmente las funciones que se usan con más frecuencia. El menú TOOLS cambia según el modo de entrada externo que se está viendo. 1 Pulse el botón TOOLS. Aparece el menú TOOLS . HERRAMIENTAS Lista Disp. Imagen Modo : Sonido Modo : Temporizador : Añadir a favoritos Cambio a aérea 2 Pulse los botones ▲ o ▼ para seleccionar un menú y, a continuación, pulse el botón ENTER.
Almacenamiento de los canales en la memoria (método automático) 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Canal; a continuación pulse el botón ENTER. Antena : Aire Canal Prog. Auto ► Borrar canal encriptado 2 Pulse los botones ▲ o ▼ para seleccionar Prog. Auto y pulse el botón ENTER. Lista de canales Sintonia Fina Intensidad señal 3 Pulse los botones ▲ o ▼para seleccionar una conexión de la antena y pulse el botón ENTER. ➢ Aire: Señal de antena Aire.
Para seleccionar la fuente Úselo para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD o receptores de cable y satélite (decodificadores), conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. 2 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Entrada; a continuación pulse el botón ENTER. Entrada 1 Lista de Origen Editar Nombre Pulse el botón ENTER para seleccionar Lista de Origen.
Control de la imagen Cambio del formato de la imagen ➢ El televisor puede tardar unos segundos en encenderse. 1 Pulse el botón MENU para mostrar el menú. Pulse el botón ENTER para seleccionar Imagen. Imagen Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. Modo : Normal Contraste : 95 Brillo : 45 Definicón : 50 Color : 50 Tinte (V/R) : V50/R50 ► Configuración detallada Opciores de imagen 2 Pulse el botón ENTER.
Ajuste de la configuración detallada Los nuevos televisores Samsung permiten una configuración más precisa de la imagen que los modelos anteriores. Consulte más adelante cómo realizar una configuración detallada. Activación de la configuración detallada 2 Pulse el botón ENTER para seleccionar Modo. Pulse los botones ▲ o ▼ para seleccionar Normal o Película, a continuación, pulse el botón ENTER. Imagen Pulse el botón MENU para ver el menú. Pulse el botón ENTER para seleccionar Imagen.
Activación de gamma Gamma Se puede ajustar la intensidad de los colores primarios (rojo, verde y azul). (-3 ~ +3) +1 10 Pulse los botones ▲ o ▼ para seleccionar Gamma y, a continuación, pulse el botón ENTER. Ajustar Ingresar Regresar 11 Pulse los botones ◄ o ► para disminuir o aumentar el valor. Pulse el botón ENTER. Activación del balance de blanco Configuración detallada Se puede ajustar la temperatura del color para conseguir colores más naturales.
Activación de xvYCC Si ajusta el modo xvYCC como Encendido, se aumenta el detalle y el espacio de color mientras se ven películas desde un dispositivo externo (por ejemplo, un reproductor de DVD) conectado a los terminales HDMI o Component IN. Configuración detallada Contraste Dinám. : Bajo LED Control : Auto Gamma :0 19 Pulse los botones ▲ o ▼ para seleccionar xvYCC y, a continuación, pulse el botón ENTER.
Cambio del tamaño de la pantalla Es posible que alguna vez desee cambiar el tamaño de la imagen en la pantalla. El televisor se suministra con seis opciones de tamaño de la pantalla, cada una diseñada para que funcione lo mejor posible con tipos específicos de entrada de vídeo. Es posible que el receptor de cable o satélite tenga también su propia gama de tamaños de pantalla. Sin embargo, en general, debe ver el televisor en el modo 16:9 tanto como sea posible.
16:9 Establece la imagen en modo panorámico 16:9. Zoom1 Tamaño de pantalla cuando se amplía verticalmente el formato amplio. Zoom2 Tamaño de pantalla cuando se amplía verticalmente el formato Zoom1. Ajuste ancho Amplía la relación de aspecto de la imagen para que se ajuste al ancho total de la pantalla. 4:3 Ajusta la imagen en modo normal 4:3.
DNIe (motor digital de imágenes naturales) Este televisor incluye la función DNIe con el fin de conseguir una gran calidad visual. Si ajusta DNIe en Encendido, podrá ver la pantalla con la función DNIe activada. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (Consulte la página 27) 2 Pulse los botones ▲ o ▼ para seleccionar DNIe y, a continuación, pulse el botón ENTER. 3 Pulse los botones ▲ o ▼ para seleccionar Apagado o Encendido o pulse el botón ENTER.
Configuración de la función del modo de película El televisor se puede configurar para detectar automáticamente y procesar las señales de las películas procedentes de todas las fuentes y ajustar la imagen para conseguir una calidad óptima. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (Consulte la página 27) 2 Pulse los botones ▲ o ▼ para seleccionar Modo película y, a continuación, pulse el botón ENTER.
Reducción de los efectos de una pantalla quemada Si la pantalla se ha quemado, puede seleccionar una pantalla blanca o un patrón de señal para que le ayude a retirar los elementos quemados. 1 Siga las instrucciones 1 y 2 de Activación de las opciones de la imagen. (consulte la página 27) 2 Pulse los botones ▲ o ▼ para seleccionar Protección de Pantalla y, a continuación, pulse el botón ENTER. Opciones de imagen Digital NR : Auto DNle : Apagado N.
➢ ➢ ➢ Las gafas 3D (incluido el emisor) que no hayan sido fabricadas por Samsung, RealD e ilixco pueden no ser compatibles. Las gafas 3D y el emisor deben ser del mismo fabricante. Si juega o ve la televisión durante un tiempo prolongado llevando puestas las gafas 3D, puede experimentar fatiga ocular o dolor de cabeza. Cambio de modo Opciones de imagen Proporciona la función para encender el efecto 3D. Puede elegir entre Modo1 y Modo2.
Visualización de imagen sobre imagen Puede usar la función PIP para ver simultáneamente la televisión (sólo emisiones analógicas) y una fuente de vídeo externa. (Consulte la página 40 para seleccionar el sonido de la imagen PIP.) Este producto lleva un sintonizador incorporado que no permite la función PIP en el mismo modo. En el apartado ‘Configuración de PIP’ encontrará más detalles. ➢ Cuando V-Chip (consulte la página 57) está funcionando, no se puede utilizar la función PIP.
Cambio de la posición de la ventana PIP 4 Pulse los botones ▲ o ▼ para seleccionar Posición y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar la posición de la ventana PIP que desea y pulse el botón ENTER. ➢ En los modos Ventana Doble ( ) y Ancho Doble ( Posición no se puede seleccionar.
Apéndice Utilización de los parámetros de sonido automáticos Sonido Puede seleccionar el modo de sonido que se ajuste al programa que se está viendo. Modo : Favorito ► Ecualizador 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. • • • • • Sonido 2 Pulse el botón ENTER para seleccionar Modo.
Reajuste de la configuración del ecualizador a los valores predefinidos de fábrica 5 Pulse los botones ▲ o ▼ para seleccionar Reiniciar y, a continuación, pulse el botón ENTER. ➢ La configuración del ecualizador se restablece a la configurada de fábrica. Pulse el botón EXIT para salir. Ecualizador ▲ Balance I D 100Hz - + 300Hz - + 1kHz - + 3kHz - + 10kHz - + Reiniciar ► Mover Ingresar Regresar Favorito regresa alos valores predeterminados.
POWER Elección del idioma preferido TV ON/OFF El sistema de transmisión de TV digital permite transmitir simultáneamente muchas pistas de audio (por ejemplo, traducciones simultáneas del programa en otros idiomas). Idioma preferido 1 Equalizer Trusurround SRS XT Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. : English Sonido Multi-track : Mono Vol.Auto Pulse el botón EXIT para salir.
Control automático de volumen Reduce las diferencias en el nivel de volumen entre las emisoras. 1 Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. Sonido Pulse el botón EXIT para salir. : English Sonido Multi-track : Estéreo Vol. Auto : Apagado Altavoz TV : Encendido Sel. Sonido : Principal ► Reinicio del sonido 2 Pulse los botones ▲ o ▼ para seleccionar Vol. Auto.; a continuación pulse el botón ENTER.
Audición del sonido de la imagen secundaria (PIP) Cuando se activa la función PIP se puede escuchar el sonido de la imagen secundaria (PIP). 1 Sonido Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Sonido; a continuación pulse el botón ENTER. Vol.Auto : Apagado Altavoz TV : Encendido Sel. Sonido : Principal ► Reinicio del sonido 2 Pulse los botones ▲ o ▼ para seleccionar Sel. Sonido y, a continuación, pulse el botón ENTER.
Control de los canales Gestión de los canales Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales. Visualización de todos los canales Puede ver todos los canales que tiene disponibles. Para usar la función de la lista de canales, en primer lugar se ha de ejecutar Prog. Auto (consulte la página 22). 1 Prog. Auto Borrar canal encriptado Canal Pulse el botón MENU para mostrar el menú.
Supresión y adición de canales Puede suprimir o añadir un canal para que se muestren los canales que desee. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal; a continuación pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. Pulse el botón ◄ para seleccionar Canales agregados. 3 Pulse los botones ▲ o ▼ para seleccionar Todos los canales. Muestra todos los canales disponibles actualmente. Pulse el botón ENTER.
Prog. Auto Borrar canal encriptado Canal Ajuste de los canales favoritos Puede configurar como favoritos los canales que vea con más frecuencia. 1 Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. Lista de canales ► Sintonia Fina Intensidad señal 2 Pulse el botón ◄ para seleccionar Canales agregados.
Prog. Auto Borrar canal encriptado Canal Reserva de un programa (visualización de la hora) Si reserva un programa que desea ver, el canal se cambia automáticamente al canal reservado en la lista de canales aunque esté viendo otro canal. Para reservar un programa primero debe configurar la hora actual. Consulte las páginas 51~52. Los canales reservados sólo se pueden configurar si se encuentran en la lista de canales (consulte la página 44).
Confirmación de una reserva de visualización Se puede ver, cambiar o borrar una reserva. Canal 1 Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER. Prog. Auto Borrar canal encriptado Lista de canales ► Sintonia Fina Intensidad señal 2 Pulse el botón ◄ para seleccionar Canales agregados.
Etiquetado de canales analógicos Los canales se pueden etiquetar con el propósito de que cuando éstos se seleccionan se pueda ver su nombre. Prog. Auto Borrar canal encriptado Canal 1 Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Canal y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Lista de canales y, a continuación, pulse el botón ENTER.
Supresión de los canales codificados digitales La función Borrar canal encriptado se usa para filtrar los canales codificados después de realizar una búsqueda automática. Puede tardar de 20 a 30 minutos. Antena Borrar canal encriptado ► Lista de canales Sintonia Fina Intensidad señal Para detener la búsqueda de canales codificados: Pulse el botón ENTER para seleccionar Detener. Pulse el botón ◄ para seleccionar Sí y, a continuación, pulse el botón ENTER.
Comprobación de la potencia de la señal digital A diferencia de los canales analógicos, cuya calidad de recepción puede variar desde “nebuloso” a claro, los canales digitales (HDTV) tienen una calidad de recepción perfecta o no se reciben en absoluto. Por tanto, a diferencia de los canales analógicos, no puede sintonizar ningún canal digital. Puede, no obstante, ajustar la antena para mejorar la recepción de los canales digitales disponibles.
Pantalla del PC Utilización del televisor como pantalla del PC Configuración del software del PC (basado en Windows XP) A continuación se muestra la configuración de visualización de Windows para un ordenador típico. Probablemente la pantalla real de su PC sea distinta; dependerá de la versión concreta de Windows y de la tarjeta de vídeo que tenga. Aunque las pantallas reales sean diferentes, la información de configuración básica que se aplica en casi todos los casos es la misma.
Ajuste del televisor con el ordenador Cómo realizar un ajuste automático Mediante la función de ajuste automático se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que recibe del ordenador. Esta función también ajusta automáticamente la configuración, los valores de frecuencia y la posición. 1 Pulse el botón EXIT para salir. ➢ ➢ Imagen El mensaje Ajuste Autom. en progreso. Espere por favor.
POWER Definición TV Imagen Cambio de la posición de la pantalla :ON/OFF 50 Ajuste Automático Pantalla ► Configuración detallada Opciones de imagen Ajuste la posición de la pantalla del PC si no se acopla a la pantalla del televisor. Reinicio de la imagen ➢ Preselección: Pulse el botón ENTER para seleccionar el modo PC. 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Imagen y, a continuación, pulse el botón ENTER.
Ajuste de la hora Configuración de la hora El ajuste del reloj es necesario para utilizar las distintas funciones de temporización del televisor. Además, podrá ver la hora mientras ve la televisión. (Pulse el botón INFO.) Opción 1: Ajuste manual del reloj 1 Plug & Play Idioma Configuración Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Opción 2: Ajuste automático del reloj El reloj puede ajustarse automáticamente cuando se recibe una señal digital. Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER.
Activación y desactivación del temporizador 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER. Plug & Play Configuración Utilice esta función para que el televisor se encienda o apague a una hora concreta. Debe ajustar el reloj en primer lugar.
Ajuste del temporizador de desconexión 1 Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Tiempo y, a continuación, pulse el botón ENTER. Plug & Play Configuración El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (30, 60, 90, 120, 150 y 180 minutos).
Descripción de las funciones Selección del idioma de los menús 1 Configuración Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Pulse los botones ▲ o ▼ para seleccionar Idioma y, a continuación, pulse el botón ENTER.
Uso del V-Chip Sólo EE.UU. Este producto está protegido por las siguientes patentes de EE.UU.: US4,930,158 US4,930,160 La opción V-Chip bloquea automáticamente los programas que no se consideran apropiados para los menores. El usuario debe introducir primero un código PIN (número de identificación personal) para configurar o cambiar las restricciones de V-Chip. ➢ La función V-Chip no está disponible en los modos HDMI, Componente o PC.
Activación/desactivación de V-Chip 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. V-Chip Ingresar Código * 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip; a continuación pulse el botón ENTER. Se muestra el mensaje Ingresar Código. Escriba su código PIN de 4 dígitos. * * * 0~9 Ingresar Código 3 Aparece la pantalla V-Chip.
4 Aparecerá la pantalla Guías pater. TV. Pulse los botones ▲ o ▼ para seleccionar una de las seis categorías basadas en la edad: • TV-Y:Todos los niños. Los temas y elementos de este programa están diseñados específicamente para audiencia muy joven, incluidos niños de edad entre los dos y seis años. • TV-Y7: Dirigido a niños más mayores. Los temas y elementos de este programa pueden incluir violencia física o cómica suave, o puede asustar a niños con una edad inferior a los 7 años.
Cómo configurar las restricciones utilizando “Clas. MPAA” (G, PG, PG-13, R, NC-17, X, NR) 1 Idioma Configuración El sistema de clasificación MPAA utiliza el sistema de la Asociación americana de cinematografía y se aplica principalmente en las películas. Cuando el bloqueo V-Chip está activado, el televisor bloquea automáticamente cualquier programa que tenga una determinada clasificación (ya sea según la clasificación MPAA o según la guía de programas de TV).
Cómo configurar las restricciones utilizando el sistema inglés canadiense Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Idioma : Español Tiempo Configuración 1 V-Chip ► Subtítulo Configuración externa Entretenimiento : Apagado PIP Actualización del software 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip y, a continuación, pulse el botón ENTER. Se muestra el mensaje Ingresar Código.
Cómo configurar las restricciones utilizando el sistema francés canadiense 1 Idioma Configuración Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. : Español Tiempo V-Chip ► Subtítulo Configuración externa Entretenimiento : Apagado PIP Actualización del software 2 Pulse los botones ▲ o ▼ para seleccionar V-Chip y, a continuación, pulse el botón ENTER. Se muestra el mensaje Ingresar Código.
Uso de V-Chip (V-Chip) con los canales digitales 1 Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. Idioma Configuración La información de la restricción paterna se puede usar mientras se ven los canales DTV.
Cómo reiniciar el televisor cuando el V-Chip bloquea un canal (“Escape de emergencia”) Si el televisor sintoniza un canal restringido, el V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el siguiente mensaje: 1 Pulse el botón ENTER para seleccionar Aceptar. Para volver al modo de visualización normal, sintonice un canal diferente con los botones CH o CH . En ciertas condiciones (según la clasificación de W.
Visión de subtítulos (mensajes de texto en pantalla) - Digital La función digital Subtítulo funciona en canales digitales. Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Subtítulo y, a continuación, pulse el botón ENTER.
Visión de subtítulos (mensajes de texto en pantalla) - Analógico La función Subtítulo analógico funciona tanto en el modo de canal de televisión analógica como cuando la señal proviene de un dispositivo externo. (Dependiendo de la señal de transmisión, la función de Subtítulos analógicos puede funcionar en canales digitales.) Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER.
Ajuste de la melodía de encendido y apagado del televisor El volumen del sonido de la melodía del encendido y del apagado del televisor se puede configurar. 1 V-Chip Configuración Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. • • • • Apagado: Apaga la función de la melodía. Bajo: Establece el volumen de la melodía en un nivel bajo. Medio: Establece el volumen de la melodía en un nivel medio.
Configuración del modo Entretenimiento El modo Entretenimiento permite seleccionar la mejor visualización y el sonido óptimo para ver deportes y películas y para los juegos. Pulse el botón MENU para mostrar el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTER. 2 Pulse los botones ▲ o ▼ para seleccionar Entretenimiento y, a continuación, pulse el botón ENTER.
Actualización del software Samsung puede ofrecer actualizaciones del firmware del televisor en el futuro. Póngase en contacto con el centro de llamadas de Samsung en 1- 00-SAMSUNG para recibir información acerca de la descarga de las actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto USB situado en el lateral del televisor.
WISELINK Uso de la función WISELINK Esta función permite ver archivos de fotos (JPEG) y escuchar archivos de audio (MP3) guardados en un dispositivo de clase de almacenamiento masivo (MSC) USB. 1 Pulse el botón POWER del mando a distancia o del panel frontal. ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ ➢ Panel lateral del TV El televisor está encendido. Conecte un dispositivo USB que contenga archivos JPEG o MP3 al terminal WISELINK (conector USB) que se encuentra en el lateral del televisor.
POWER TV ON/OFF Uso del menú WISELINK 1 Pulse el botón MENU. Pulse los botones ◄ o ► para seleccionar Aplicaciones y, a continuación, pulse el botón ENTER. Domicilio POWER Pulse los botones ▲ o ▼ para seleccionar WISELINK y, a continuación, pulse el botón ENTER. ➢ Se muestra el menú WISELINK. PRE-CH MUTE Música Photo Dispositivo 851.98MB/995.00MB Free Photo TV USB Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK.
Uso de la lista de fotos Este menú muestra carpetas y archivos de las fotos guardadas en un dispositivo de memoria USB. Lista de fotos 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. 2 Pulse los botones ▲ o ▼ para seleccionar Photo y, a continuación, pulse el botón ENTER. ➢ Este menú sólo muestra los archivos con extensión jpg. Los archivos con otro formato como bmp o tiff no se muestran. ➢ Se muestran los archivos de fotos.
7 Elementos de ayuda • Botón rojo (Dispositivo): Selecciona el dispositivo conectado. • Botón verde (Configuración de favoritos): Cambia la configuración de favorito de la foto seleccionada. Pulse este botón varias veces hasta que se muestre el valor que desee. • Botón amarillo (Selección): Selecciona fotos en la lista de fotos. Las fotos seleccionadas se marcan con un símbolo ( ) situado a su izquierda.
Orden de las fotos por mes 1 Photo Seleccione Mensual como orden estándar de la lista de fotos. Imagen_1.jpg Mes : Jan Borrar archivo sel. Fecha : Jan.01.2008 Color : Gris Cambiar info grupo Composición : Carpeta : P-other Deselecc. todos Favoritos : ★★★ Retirar con seguridad 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por meses. Preferencias 3 Mensual Pulse el botón TOOLS. Jan 4 Pulse los botones ▲ o ▼ para resaltar Repr. grupo actual.
Cambio de la información del color 1 Selección Color como norma de clasificación en la lista de fotos y pulse los botones ◄ o ► para seleccionar una foto. ➢ C ambio de la información de varios archivos Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. A continuación pulse el botón amarillo. Repita el proceso anterior para seleccionar varias fotos. La marca ( ) aparece a la izquierda de la foto seleccionada. 2 Pulse el botón TOOLS.
Eliminación de archivos de fotos 1 Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. 2 Pulse el botón TOOLS. 3 Pulse los botones ▲ o ▼ para seleccionar Borrar y, a continuación, pulse el botón ENTER. ➢ A parece el mensaje Seleccionados: IMG.jpg... 1 Archivos ¿ Borrar arch. sel.?. ➢ C uando se borra un archivo de sólo lectura, aparece el mensaje Es un archivo de sólo lectura. ¿Borrar este archivo? 4 Pulse los botones ◄ o ► para seleccionar Aceptar y pulse el botón ENTER.
Visualización de una foto o una presentación Visualización de una foto 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. Imagen_1.jpg 440x440 104.1KB 2008/1/1 2 Pulse los botones ◄ o ► para ir a Foto y pulse el botón ENTER. ➢ Se muestran los archivos de fotos. 3 Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. 4 Pulse el botón ENTER sobre el icono de la foto. La foto seleccionada se muestra en toda la pantalla.
Uso del menú de opciones durante una presentación (o la visualización de una foto) 1 Durante una presentación (o la visualización de una foto), pulse el botón TOOLS para establecer una opción. Pulse los botones ▲ o ▼ para seleccionar la opción deseada. A continuación, pulse el botón ENTER. Inicio de una presentación (Detención de una presentación) Se puede iniciar o detener una presentación. Pulse los botones ▲ o ▼ para seleccionar Inic. vis.
Ampliación Puede ampliar las imágenes en el modo de pantalla completa. Pulse los botones ▲ o ▼ para seleccionar Zoom y, a continuación, pulse el botón ENTER. Pulse los botones ◄ o ► para aumentar o reducir el efecto de la ampliación. (x1 → x2 → x4) Para mover una foto ampliada, pulse el botón ENTER y a continuación los botones ▲/▼/◄/►. ➢ Tenga en cuenta que si una imagen ampliada es menor que el tamaño de la pantalla original, la función de cambio de ubicación no está operativa.
Configuración de la música de fondo Se puede configurar la música de fondo. Pulse los botones ▲ o ▼ para seleccionar Configuración de la música de fondo y, a continuación, pulse el botón ENTER. ➢ Si se desactiva la opción Música de fondo, aunque se haya configurado Configurar música de fondo la música de fondo no se reproducirá. ➢ Es necesario cargar los archivos de música para cambiar BGM Mode. Reproduzca los archivos de música en la categoría de música para cargar.
Uso de la lista de música El menú muestra los archivos MP3 que se encuentran entre los archivos guardados en un dispositivo de memoria USB. 1 Press the W.LINK button on the remote control to display the WISELINK menu. Domicilio 851.98MB/995.00MB Free USB Music 2 Pulse los botones ▲ o ▼ para seleccionar Música y, a continuación, pulse el botón ENTER. ➢ Se muestran los archivos de música y las carpetas existentes.
Clasificación de la lista de música Se pueden clasificar los archivos de música de la lista según una norma particular. 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. 2 Pulse los botones ◄ o ► para seleccionar Music y pulse el botón ENTER. ➢ Se muestran los archivos de música. 3 Pulse los botones ▲ o ▼ para seleccionar una norma de clasificación. (Título, Artista, Ánimo, Género, Carpeta, Preferencias) • Título: Ordena los archivos de música por el título.
Orden de las música por género 1 Music Seleccione Género como orden estándar de la lista de música. Gold 2 Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por género. 3 4 Orden de las fotos por carpeta Black Capricorn Day Once Ost 2007 Soundtrack Sad Información ★★★ Synkronized 1999 Acid Jazz Exciting ★★★ Género Ánimo Blues ▲ ...
Supresión de archivos de música 1 Pulse los botones ◄ o ► para seleccionar la música que desee de la lista. 2 Music If Everyone Cared Pulse el botón TOOLS. 3 Pulse los botones ▲ o ▼ para seleccionar Borrar y, a continuación, pulse el botón ENTER. ➢ Se muestra el mensaje (por ejemplo) Seleccionados: music.jpg... 1 Archivos ¿ Borrar arch. sel.?. ➢ Cuando se borra un archivo de solo lectura, aparece el mensaje Read-only file(s). Es un archivo de sólo lectura. ¿Borrar este archivo?.
Reproducción de un archivo de música Reproducción de un archivo de música 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. Music If Everyone Cared 2 Pulse los botones ◄ o ► para seleccionar Music y pulse el botón ENTER. ➢ Se muestran los archivos de música. 3 Pulse el botón ENTER para seleccionar el archivo de música que se desea reproducir y pulse el botón ENTER. ➢ E ste menú sólo muestra archivos con la extensión MP3.
Reproducción de los archivos de música seleccionados 1 4 Music Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. If Everyone Cared Pulse los botones ◄ o ► para seleccionar Music y pulse el botón ENTER. If You Want Me Lies Nickelback Marketa lrgl... Glen Hansard All The Right Reas..
Uso del menú de configuración El menú de configuración muestra al usuario la configuración del menú WISELINK. 1 Pulse el botón W.LINK del mando a distancia para mostrar el menú WISELINK. 2 Pulse los botones ◄ o ► para seleccionar Configuración y pulse el botón ENTER. 3 Pulse los botones ▲ o ▼ para seleccionar la opción deseada. (Velocidad del visionado automático, Música Modo de repetición, Tiempo ejec. protect. pant.
Acerca de Anynet+ ¿Qué es Anynet?+? Anynet+ es una función que permite controlar con el mando a distancia del televisor Samsung todos los dispositivos de Samsung conectados que sean compatibles con Anynet+. Conexión de dispositivos Anynet+ El sistema Anynet+ sólo se puede usar con dispositivos de Samsung que tengan la función Anynet+. Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet+.
Configuración de Anynet+ Los parámetros siguientes ayudan a configurar las funciones Anynet+. Para usar la función Anynet+, Anynet+ (HDMI-CEC) debe estar configurado como Encendido (On). 1 2 Pulse los botones ▲ o ▼ para seleccionar Anynet+ (HDMI-CEC) y, a continuación, pulse el botón ENTER. 3 Pulse los botones ▲ o ▼ para seleccionar Encendido y, a continuación, pulse el botón ENTER. ➢ La función Anynet+ (HDMI-CEC) está activada. ➢ Si selecciona Apagado, Anynet+ (HDMI-CEC) se desactiva.
Menú Anynet+ El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor. Menu Anynet+ Descripción Ver TV Cambia de Anynet+ al modo de emisión de TV. Lista Disp. Muestra la lista de dispositivos de Anynet+. Grabar: (Nombre_dispositivo) Comienza una grabación. (Este menú sólo funciona con dispositivos que admiten grabación.) Menú (Nombre_dispositivo)) Muestra el menú del dispositivo conectado.
Escucha a través de un receptor (sistema Home Cinema) Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV. 1 Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Receptor y, a continuación, pulse el botón ENTER. 2 Pulse los botones ◄ o ► para seleccionar Encendido y, a continuación, pulse el botón ENTER. Ahora podrá escuchar el sonido a través del receptor. HERRAMIENTAS Ver TV Lista Disp.
Apéndice Resolución de problemas Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si no funciona ninguno de estos consejos, llame al centro de servicio técnico Samsung más cercano. Problema Posible solución Mala calidad de imagen. Pruebe con otro canal. Ajuste la antena. Compruebe las conexiones de todos los cables. Pruebe con otro canal. Ajuste la antena. Pruebe con otro canal. Pulse el botón SOURCE. Compruebe que el televisor esté enchufado.
Limpieza y mantenimiento del TV Siga estas indicaciones para obtener el máximo rendimiento de su televisor. Colocación ● ● ● ● No sitúe el televisor cerca de lugares muy calientes, fríos, húmedos o polvorientos. No coloque el TV cerca de aparatos con motores eléctricos que crean campos magnéticos, como las aspiradoras. Mantenga despejadas las aberturas de ventilación; no coloque el TV sobre una superficie blanda, como tela o papel. Coloque el TV sólo en posición vertical.
Especificaciones técnicas Las descripciones y las características de este folleto se facilitan con fines informativos solamente y están sujetas a modificación sin previo aviso. Nombre del modelo Tamaño de pantalla (diagonal) Resolución del PC HL61A750A1F HL67A750A1F 61 pulgadas (60,9 pulgadas medidas diagonalmente) 67 pulgadas (66,9 pulgadas medidas diagonalmente) 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Sonido (Salida) Dimensiones (Al. x An. x Pr.
Esta página se ha dejado en blanco expresamente. BP68-00658A-01SPA.