Samsung SRD Series Installation Guide EOS Australia PTY LTD
Samsung SRD Series EOS Australia PTY LTD by Andrew Vo-Nguyen This guide is designed for installers as a quick guide and a check list of what should be configured on a DVR on installation. It goes through the most important topics to ensure all configurations meet the end user's expectations and performs at it's maximum capacity.
Contents 3 Table of Contents Part I DVR Configuration 5 1 Naming ................................................................................................................................... Cameras 5 2 Date &................................................................................................................................... Time 6 3 User Management ...................................................................................................................................
Part I
DVR Configuration 1 5 DVR Configuration The following DVR configurations should be checked and configured on installation of any DVR onto any site. Settings may vary depending on how the customer wants the DVR configured. 1.1 Naming Cameras Go to [Menu] > [Device] > [Cameras]. Double click each camera to change the name.
1.2 Samsung SRD Series Installation Guide Date & Time Go to [Menu] > [System] > [Date/Time/Language] Time and Date should always be checked to ensure all recordings are synchronized with real time. If your DVR is connected to the internet you can Sync to a Time Server online.
DVR Configuration 1.3 7 User Management Go to [Menu] > [System] > [Permission Management] The default 'admin' password is '4321'. This can be changed as a master password or installer password. It is a good idea to keep the 'admin' password for the installer only, and create users for the end user. Only 1 admin user can be logged in locally or remotely into the DVR at any given time. Create extra users for simultaneous logins.
Samsung SRD Series Installation Guide You must 'Add' a group with permission policies before adding a 'User'. This is fond under the [Group] tab. Once a group as been added, go to the [User] tab to add a user.
DVR Configuration 1.4 9 Harddrive Management Go to [Menu] > [Device] > [Storage Device] Go to the [Format] tab to view how much storage is used on each Harddrive. Also check the status of any CD/DVD or USB device.
Part II
Recording Configiration 2 11 Recording Configiration The following recording configurations should be checked and configured on installation of any DVR onto any site. Settings may vary depending on how the customer wants the DVR configured. 2.1 Recording Schedule Go to [Menu] > [Record] > [Recording Schedule] Right click anywhere on the table to select your Recording Type (No Recording / Continuous , Event, Both).
Samsung SRD Series Installation Guide Below are the Recording Type colour codes for the Recording Schedule. The below Recording Schedule is only for Camera 1, press 'Apply to All CH' to apply to all channels.
Recording Configiration 2.2 Event Record Duration Go to [Menu] > [Record] > [Event Record Duration] Configure the buffer time before and after a motion event occurs.
2.3 Samsung SRD Series Installation Guide Recording Quality & Resolution Go to [Menu] > [Record] > [REC Quality & Resolution] There are 2 tabs at the top, [Standard] tab relates to Continuous recording and [Event] tab relates to Motion recording. Depending on which DVR you have, the Frame rates and Resolutions may vary.
Recording Configiration 2.4 15 Motion Recording Go to [Menu] > [Event] > [Motion Detection] In order for your DVR to detect Motion as an Event, make sure 'Mode' is set to 'ON' for each channel (See below). Also click on 'Motion Region' to mask and exclude particular areas from Motion Detection.
Part III
Network Configuration 3 Network Configuration 3.1 IP Settings Go to [Menu] > [Network] > [Connection Mode] Under the [Connection] tab, fill out the network details Connection Mode: Bandwidth: IP: Gateway: Subnet Mask: DNS: EOS Australia PTY LTD Select 'Static IP' to enter the DVR's local IP Address. This is the maximum bandwidth the DVR can throughput. The Local IP address of the DVR. The Router's IP Address (only used for accessing the internet). The Subnet Mask of the network.
3.
Network Configuration 3.3 Live Transfer Go to [Menu] > [Network] > [Live Transfer] The SRD Series DVR has the ability to stream a different Resolution and Quality over the network. This ensures that the network stream can stream quicker rather than streaming the Recording resolution.
3.4 Samsung SRD Series Installation Guide Smart Phone Connection The Samsung SRD Series is compatible with iPhone, iPad and all Android devices. The iPolis Mobile app gives you the ability to View your cameras live, Playback your cameras, and also Control the Pan Tilt Zoom function. Search for keyword 'iPolis' in the App Store or Android Market, or run a QR Scan on below codes.
Part IV
Samsung SRD Series Installation Guide 4 Configurations 4.1 Updating Firmware Go to [Menu] > [System] > [System Management] To update your DVR's firmware, you need to download the latest firmware file from http://www.samsungcctv.com/. Once you download the firmware file (.zip file), you need to unzip the file and place it on the root directory of your USB stick (.img file). Press the 'Upgrade' button to load the firmware file from your USB stick.
Configurations 4.2 23 Loading/Saving Configurations The SRD Series DVR has the ability Load or Save Configuration files of the same model DVR to save time configuring multiple DVRs. The settings configuration file is saved and loaded from a USB stick. When you save a setting, it is saved in a folder on the USB called 'detroit'.
Part V
Troubleshooting 5 25 Troubleshooting 1. No cameras are showing on the screen even though they are plugged in Check [Menu] > [Devices] > [Cameras] and see if any cameras are set to 'Covert'. 2. The cameras are showing live but no recording is present in search mode a) Check [Menu] > [Recording] > [Recording Schedule] to see if the cameras are set to ‘No Recording’. b) Check [Menu] > [Event] > [Motion Detection] to see if ‘Motion Detection’ is turned on and if the motion area has been masked out.
Samsung SRD Series Installation Guide 10. The hard-drive is full but is not cycling Go to [Menu] > [Record] > [Record Option] and check if overwrite mode is on. 11. The live screen does not show my cameras, it shows a Samsung wallpaper Go to [Menu] > [System] > [Permission Managemen]t > [Setup] tab to see if the Restricted Access is ticked on ‘Live View’ 12.