Upgrade guide Firmware Upgrade InstructionBecause there are two separate firmware packages to complete the upgrading process of the L5 Series, please read the attached upgrade instruction completely prior to upgrade.

ManualsBrandsSamsung ManualsHD TVs2008 LCD TV

Samsung TV

F/W Upgrade Guide

Samsung Electronics

LN46A580P6F, LN52A580P6FL580

LN32A550P3F, LN37A550P3F, LN40A550P3F

LN46A550P3F, LN52A550P3F

L550

LN40A540P2F, LN46A540P2F, LN52A540P2FL540

Model CodeSeries (L5)

Summary of content (8 pages)

PAGE 1
Samsung TV F/W Upgrade Guide Series (L5) Model Code L540 LN40A540P2F, LN46A540P2F, LN52A540P2F L550 LN32A550P3F, LN37A550P3F, LN40A550P3F LN46A550P3F, LN52A550P3F L580 LN46A580P6F, LN52A580P6F Samsung Electronics 1
PAGE 2
Notice: Please read completely prior to upgrade ¾There are two separate firmware packages required to complete the upgrading process of the L5 series: Version 1005.1 or higher for the main processor L540_L550_L580 firmware 1005.1.exe Version 1006.1 for the sub processor L540_L550_L580 firmware 1006.1.exe ¾First determine what the current firmware version is for the main processor (see below). If the version is 1005.1 or higher proceed to Step 2 and upgrade the sub processor with 1006.1.
PAGE 3
Step1. Upgrade the firmware version 1005.1 1. Save the firmware file onto your computer. File : L540_L550_L580 firmware 1005.1.exe 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file into the USB Memory Drive. 3. Go to the USB Memory Drive and then double click the file L540_L550_L580 firmware 1005.1.exe. 4. Press “Unzip” button. 5. Unzipping is in progress. 6. After completing, press 7. The USB driver should contain one folder “OK” and “Close” button. named ‘T-PRL3AUS’ 8.
PAGE 4
9. Turn your TV on, and then insert the USB Memory Drive containing the firmware upgrade into the WISELINK port at the Side-AV panel. NOTE: If you get the “WiseLink” onscreen selection menu, select “NO” 10. Press the Menu button on your Remote Control. 11. Go to Setup. On the Setup Menu, select SW Upgrade, and then press Enter or the arrow button (▶) on your remote. 12. The TV will scan the USB Memory Drive.
PAGE 5
※ Do not pull the USB drive out and unplug the power cable until complete 13. When the software upgrade is complete; the TV will turn off and then back on by itself. Proceed with the ‘Plug & Play’ setup. 14. Once ‘Plug & Play’ is complete; “Enjoy your watching.” is displayed. Press the ‘Enter’ key and you are done. You can find more information in User Manual.
PAGE 6
Step2. Upgrade the firmware version 1006.1 1. If you completed Step 1 from above, remove the File and Folder (listed below) on your USB drive. File : L540_L550_L580 firmware 1005.1.exe Folder : T-PRL3AUS 2. Save the firmware file onto your computer. File : L540_L550_L580 firmware 1006.1.exe 3. Connect the USB Memory Drive to the USB port of your PC. Copy the file into the USB Memory Drive. 4. Go to the USB Memory Drive and then double click the file L540_L550_L580 firmware 1006.1.exe. 5.
PAGE 7
10. Turn your TV on and insert the USB Memory Drive containing the firmware upgrade into the WISELINK port at the Side-AV panel. NOTE: If you get the “WiseLink” onscreen selection menu, select “NO” 11. Press the Menu button on your Remote Control. 12. Go to Setup. On the Setup Menu, select SW Upgrade, and then press Enter or the arrow button (▶) on your remote. 13. The TV will scan the USB Memory Drive.
PAGE 8
※ Do not pull the USB drive out and unplug the power cable until complete 14. When the software upgrade is complete the TV will turn off and then back on by itself. Proceed with the ‘Plug & Play’ setup 15. Once ‘Plug & Play’ is complete; “Enjoy your watching.” is displayed. Press the ‘Enter’ key and you are done. You can find more information in User Manual.