User guide

2B. Making and Answering Calls 37
Ringtones and keypad tones
Choose tones and/or vibration to play for incoming
calls and keypad touches.
1. Press , and then tap .
2. Tap Menu > Call settings > Ringtones and
keypad tones.
3. Configure settings:
䡲 Device ringtone: Choose a default ringtone for
incoming calls.
䡲 Device vibration: Choose a vibration pattern, or
create your own pattern, to play for incoming calls
when Vibrate when ringing is turned On. Vibration
plays along with the ringtone, if Silent mode is not
enabled.
䡲 Vibrate when ringing: When enabled, the Device
vibration plays for incoming calls.
䡲 Keytones: When turned on, sounds play when
you touch the Phone keypad.
Call alert
Set options for sounds and vibrations during calls.
1. Press , and then tap .
2. Tap Menu > Call settings > Call alert.
3. Configure options:
䡲 Call vibrations: Enable Vibrate on connection to
network to have your phone vibrate when it
connects to the network. Enable on Call-end
vibration to have the phone vibrate when the
other caller ends the call.
䡲 Call status tones: Choose options for sounds to
play during calls. Enable Call connect tone to
have the phone play a tone when the other caller
answers a call. Enable Minute minder to have a
tone play once per minute during a call. Enable
Call end tone to have the phone play a tone when
the other caller ends the call. Touch OK to save
the settings.
䡲 Alerts on call: Enable to have notifications for
alarms and new messages play during phone
calls. When disabled, these notifications will be
muted during a call.
BST_m840_UG_.book Page 37 Monday, May 13, 2013 1:29 PM